Xin Gao

Xin Gao

Auto-generated profile, based on publicly available information

Xin Gao

School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing, China

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 December 2019 in IEEE Sensors Journal
Verified
Journal Article
Closed access
WZWenshuai Zhao
Wenshuai Zhao
LXLijun Xu
Lijun Xu
AHAng Huang
Ang Huang
XGXin Gao
Xin Gao
XLXizi Luo
Xizi Luo
ZCZhang Cao
Zhang Cao
A tunable diode laser absorption spectroscopy (TDLAS) tomographic system was proposed via utilizing the wavelength modulation spectroscopy (WMS) method and distributions of temperature and specie concentrations in the dynamic flames were simultaneously reconstructed for the first time. A five-view fan beam tomographic sensor was applied to capture the absorption spectrum along the laser paths across the region to be imaged. Light intensities in all paths were collected in a custom specific TDLAS hardware. Different phantoms of the temperature and water vapor concentration distributions were fabricated to generate artificial data of the absorption spectrum acquired in the sensor. Reconstructed images of the phantoms in the simulations agreed well with the original distributions, in cases of different random noises that varied from 1% to 7% of light intensities at each wavelength. Experiments on a McKenna burner and the exit of a wind tunnel were carried out, and distributions of temperature and water vapor’s molar concentration were achieved by applying the proposed WMS based TDLAS tomographic system. A moving steel ruler was used to disturb the flame in the burner and temporal variations of the flame over a cross section of the burner were imaged in a tomographic way. Tomographic results on exhaust flows at the exit of a wind tunnel coincided with the variation trend of temperature in eleven different working conditions and verified the robustness of the proposed system under harsh conditions.

18 January 2021 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
YTYu Tian
Yu Tian
ZCZhang Cao
Zhang Cao
DHDie Hu
Die Hu
XGXin Gao
Xin Gao
LXLijun Xu
Lijun Xu
WYWuqiang Yang
Wuqiang Yang
Electrical capacitance tomography (ECT) utilizes measured mutual capacitances across a region of interest to visualize distributions inside. As typical two-phase flows can be roughly treated as binary-valued material distributions, in this article, a fuzzy PID-controlled iterative algorithm is proposed for image reconstruction in cases of binary distributions. A closed-loop control system includes a fuzzy PID controller, Calderon’s method, and fast calculation of the Dirichlet-to-Neumann map. Capacitances measured in an electrode array of the ECT sensor are compared with the feedback, and the difference is input to the controller. Fuzzy rules are used to automatically adjust the three parameters of the controller, i.e., $K_{P}$ , $K_{I}$ , and $K_{D}$ . The controller passes the difference to Calderon’s method for reconstructing permittivity distribution. Reconstructed distribution is used to calculate a boundary map for feedback, by fast calculation of the Dirichlet-to-Neumann map, and serves as an updated reference for measured capacitances. A smooth segmentation method is also introduced to deal with the binary distribution and release the fluctuation in the tuning of the PID controller. Numerical simulations were done to verify the performance of the proposed iterative Calderon’s method for binary distributions. Experiments on real phantoms were also carried out using an ECT system to evaluate the proposed method. Several distributions were set up with solid particles and air. The results show that the proposed method can produce images with clear edges and shapes of binary distributions.

8 April 2022 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
XGXin Gao
Xin Gao
ZCZhang Cao
Zhang Cao
HLHongyao Li
Hongyao Li
FLFanghao Lu
Fanghao Lu
AHAng Huang
Ang Huang
LXLijun Xu
Lijun Xu
Laser absorption spectroscopy (LAS) tomography yields cross-sectional images of flame temperature and gas molar concentration in combustions. The total laser absorbance of a specific gas, such as water vapor at each point in the region of interest, was obtained from local normalized second harmonics on limited detectors. These detectors restrict the spatial resolution during image reconstructions through typical iterative methods. A sparse Zernike fitting method was introduced for LAS tomography, as the temperature in real physical reality is smoothly distributed. The distributions of total absorbance were sparsely fit as finite Zernike polynomials, and the coefficients were mostly zero or about zero. The number of coefficients was much smaller than that of pixels, i.e., unknowns in iterative methods. The underdetermined inverse problem was effectively alleviated, and a higher spatial resolution was achieved. A fast convergence and effective method for optimal step selection was also introduced for the iterative solution of the sparse model. The effectiveness of the proposed method was validated by both simulated and experimental data for temperature and concentration imaging. Performance comparisons were made with the typical iterative methods, such as SART and Landweber methods; temporal variations of reconstructed distributions for dynamical flames were captured with higher signal-to-noise ratios. Both the fundamental frequencies of 8.797 Hz without acoustic excitation and 12.7 Hz in the case of 150-Hz excitation were successfully captured, and tomographic images agreed well with the dynamical flame evolutions.

24 April 2020 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
XGXin Gao
Xin Gao
ZCZhang Cao
Zhang Cao
YTYu Tian
Yu Tian
LXLijun Xu
Lijun Xu
WYWuqiang Yang
Wuqiang Yang
Usually, the sensitivity matrix-based algorithms are used for image reconstruction in electrical tomography. These algorithms assume that the inverse problem is like that in the well-established medical CT and find successful applications. In the medical CT, rather than using the matrix-based algorithms, the inverse Radon transform and its derivatives dominate. However, these inverse transforms have not been introduced to electrical tomography due to a lack of the link between the parallel projections and electrical distributions. This paper presents a map from electrical field lines to parallel lines in the inverse Radon transform and a novel image reconstruction algorithm by using the transform for dual modality electrical tomography. The transform is realized through mapping the coordinates in electric field to assumed parallel projections. The points of intersections between electrical field lines from different exciting electrodes are mapped to those of parallel lines from related projections in typical inverse Radon transform. Unlike the medical CT, different excitation schemes are related to distinct equivalent projections, and iterative scanning is used to apply all available projected data. Simulated and experimental data are implemented to validate the feasibility and effectiveness of the proposed algorithm, and performance comparisons are made with three algorithms, such as Calderon’s method, iterative method based on electrical field lines and typical Landweber method. The proposed method yields good quality images in the least time and dynamic flames are monitored. Dual modality images of material distributions are obtained to capture the ignition and blowout of the flame evolution in a Bunsen burner.

8 December 2022 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
XGXin Gao
Xin Gao
ZCZhang Cao
Zhang Cao
JWJinting Wen
Jinting Wen
LXLijun Xu
Lijun Xu
WYWuqiang Yang
Wuqiang Yang
Laser absorption spectroscopy (LAS) tomography is an effective combustion diagnosis method for its simultaneous imaging of temperature and gas molar concentration. Only limited projections are available in many applications, the unknowns in the image reconstruction are much more, and it restricts the quality of reconstructed images. The radial basis function (RBF) is introduced to simplify the expressions of continuous distributions in the region of interest. The numbers of unknowns are greatly reduced, as gray values in the imaging region are depicted by the coefficient vector of these RBFs. The continuity in temperature distributions was coupled in the simultaneous algebraic reconstruction technique (SART) method. The coefficient vector of these RBFs and density distributions of integral absorbances were obtained. Gaussian compactly supported RBF was selected to reduce computation burden and reconstruction error. Performance comparisons between the proposed method and classical SART method were made. The imaging quality of proposed method was superior to SART, the temperature error was smaller than SART by nearly 10 % and high spatial resolution was achieved. Dynamic flames in the McKenna burner and wind tunnel were used to verify its robustness and applicability in harsh cases.