In connection with the increasing requirements for cleanliness in conticast steel, it is necessary to develop original solutions. The tundish, as the last refractory-lined reactor, gives enough space to remove inclusions by optimizing the flow of steel. The basic component of the tundish is the impact pad, the shape of which creates a suitable flow of steel, thus making it part of the tundish metallurgy. The optimal steel flow in the tundish must avoid creating dead zone areas, or the slag “eye” phenomenon in the slag layer around the ladle shroud, and is intended to create conditions for the release of inclusions by promoting reactions at the steel-slag phase interface. The flow also has to prevent excessive erosion of the tundish refractory lining. This paper compares the standard impact pad with the “Spheric” spherical impact pad using computional fluid dynamiscs (CFD) tools and physical modelling. The evaluation criteria are residence time and flow in the tundish at three different casting speeds.
The behavior of molten steel within a tundish plays a crucial role in achieving uniform temperature and chemical composition, enhancing the removal efficiency of non-metallic inclusions, and reducing the wear of refractory linings. These aspects are key for ensuring the production of steel with superior quality. In multi-strand delta-type tundishes, such as the six-strand configuration, flow dynamics become particularly challenging. Key considerations include strand-specific residence times, the uniform distribution of steel flow, and the mitigation of refractory degradation. This paper presents a detailed numerical analysis aimed at designing an optimally shaped impact pad. The effectiveness of each proposed design was assessed through a tracer-based visualization of flow behavior and the evaluation of residence time distribution (RTD) curves. RTD curves were created in isothermal conditions, while the calculations of the temperature fields of steel in the tundish were made in non-isothermal conditions. The results of the simulations were verified by a real plant trial test and indicate that the use of the “SPHERIC-K4” impact pad can greatly enhance the flow characteristics of liquid steel during the continuous casting process. These improvements include preventing the erosion of the tundish refractory lining, improving the distribution of residence times between individual casting strands, and adjusting the proportions of the mixing zones.
6 August 2025 in Case Studies in Thermal Engineering
This study presents the development of a novel material for a spherical impact pad for tundishes during steel production, focusing on improving steel cleanliness and flow optimization. Traditional low-carbon and ultra-low carbon concrete (LCC/ULCC) materials are replaced with a new cement-free mixture, utilizing a sol–gel method binder. This innovative approach leads to the creation of IPC TECAST BPV CST, a refractory concrete with enhanced resistance to corrosion and shape stability under extreme conditions. The material’s effectiveness is demonstrated through operational tests, showing remarkable durability and no erosion defects after extensive use in casting liquid metal. The sol–gel binder significantly reduces the carbon footprint and energy consumption during the drying process, compared to traditional concretes. This study concludes that the new material not only withstands the dynamic environment of liquid steel but also ensures consistent dynamic flow conditions throughout the steel casting process, marking a significant advancement in tundish impact pad technology.
23 March 2026 in Archives of Metallurgy and Materials
Increasing demands on cast steel quality and the need to reduce carbon footprint drive the development of new refractory materials. A ceramic composition was developed for spherical tundish impact pads to ensure dimensional stability and resistance to erosion and corrosion. It consists of a thixotropic bauxite mixture with a sol-gel binder and 16% addition of tabular alumina, improving refractoriness and strength. The absence of cement-based binders allows fast, crack-free drying and higher fired strength. Compared to CAC-based castables, it reduces energy consumption and CO2 emissions. Plant trials confirmed excellent erosion resistance, with no surface deformation or steel penetration, demonstrating full functionality and durability of the pads under molten steel exposure. The material meets technical and environmental requirements, offering a viable alternative for sustainable steel casting operations.