4 April 2025 in Measurement
19 August 2025 in Measurement Science and Technology
The gravitational constant G was the second fundamental constant to be measured. However, it exhibits the lowest measurement precision among all fundamental physical constants. The latest CODATA-2022 recommended value of G is 6.67430(15)×10−11m3kg−1s−2, with a relative standard uncertainty of 22 ppm. Over the past two centuries, the precision of G measurements has increased by only approximately three orders of magnitude. In this article, we first introduce the historical development of G measurements. Next, we compare the determinations of G obtained using different methods and instruments across various experimental setups, analyzing their respective advantages and disadvantages. Finally, we briefly discuss the temporal variation of G and the error sources in measurement of G.
28 September 2026 in Measurement Science and Technology
A two-stage pendulum system, comprising a lower torsion pendulum and an upper torsion pendulum, is widely employed in gravitational experiments. While prior research has focused primarily on the vibration isolation capability of the magnetic damper, this study investigates the dissipation coupling mechanism between the upper and lower torsion pendulums through theoretical analysis and experimental validation. The dynamic model of the two-stage pendulum system is analyzed, and expressions for the quality factor (hereafter denoted as value) of each stage are derived. An experimental apparatus is designed and constructed to enable modulation of the value of the upper torsion pendulum and then measure the response of the lower torsion pendulum. Results indicate that when the horizontal magnetic field at the center of the upper torsion pendulum is increased from 1.37 to 20.63 mT, the value of the upper torsion pendulum decreases from 701 to 7, which leads to a reduction in the value of the lower torsion pendulum—from 1.6 10 to 9.0 10 . In gravitational experiments with a silica fiber, after using the magnetic damper, the value of the lower torsion pendulum can be reduced by approximately half, which results in an increase in thermal noise. This work offers valuable insights into the dissipation coupling mechanism of a two-stage pendulum system and aids in assessing noise sources in precision measurements.