Ultrafast supercontinuum generation in gas-filled waveguides is an enabling technology for many intriguing applications ranging from attosecond metrology towards biophotonics, with the amount of spectral broadening crucially depending on the pulse dispersion of the propagating mode. In this study, we show that structural resonances in a gas-filled antiresonant hollow core optical fiber provide an additional degree of freedom in dispersion engineering, which enables the generation of more than three octaves of broadband light that ranges from deep UV wavelengths to near infrared. Our observation relies on the introduction of a geometric-induced resonance in the spectral vicinity of the ultrafast pump laser, outperforming gas dispersion and yielding a unique dispersion profile independent of core size, which is highly relevant for scaling input powers. Using a krypton-filled fiber, we observe spectral broadening from 200 nm to 1.7 μm at an output energy of ∼ 23 μJ within a single optical mode across the entire spectral bandwidth. Simulations show that the frequency generation results from an accelerated fission process of soliton-like waveforms in a non-adiabatic dispersion regime associated with the emission of multiple phase-matched Cherenkov radiations on both sides of the resonance. This effect, along with the dispersion tuning and scaling capabilities of the fiber geometry, enables coherent ultra-broadband and high-energy sources, which range from the UV to the mid‐infrared spectral range.
Due to unique properties, antiresonant hollow core fibers have found widespread use in various fields of science and application. Particular regarding applications that involve ultrashort pulses, precise knowledge of group velocity dispersion is essential to understand the underlying physics and to optimize device performance. Here we report on the successful measurement of the spectral distribution of the group velocity dispersion of the fundamental mode of an antiresonant hollow core fiber in close proximity to and away from a strong strand resonance. The results show the variations of the hundreds of fs 2 /cm near the resonance region, whereas the dispersion is identical to that of a perfect cylindrical waveguide away from the resonance in accordance with a literature. An additional zero dispersion wavelength that is not present in the case of a capillary was experimentally verified. The possibility to tune dispersion via strand resonances opens up a novel pathway towards engineering pulse dispersion, with applications in fields such as nonlinear science and pulse propagation management.
Understanding polarization in waveguides is of fundamental importance for any photonic device and is particularly relevant within the scope of fiber optics. Here, we investigate the dependence of the geometry-induced polarization behavior of single-ring antiresonant hollow-core fibers on various parameters from the experimental perspective, showing that structural deviations from an ideal polygonal shape impose birefringence and polarization-dependent loss, confirmed by a toy model. The minimal output ellipticity was found at the wavelength of lowest loss near the center of the transmission band, whereas birefringence substantially increases toward the resonances. The analysis that qualitatively also applies to other kinds of hollow-core fibers showed that maximizing the amount of linearly polarized light at the fiber output demands both operating at the wavelength of lowest loss, as well as carefully choosing the relative orientation of input polarization. This should correspond to the situation in which the difference of the core extent along the two corresponding orthogonal polarization directions is minimal. Due to their practical relevance, we expect our findings to be very important in fields such as nonlinear photonics or metrology.
Due to its detailed spatial mapping capability, three-dimensional (3D) imaging has became an indispensable tool for numerous scientific applications, including medical diagnostics, industrial inspection, autonomous navigation, environmental monitoring, etc. Conventional 3D imaging techniques often suffer from limitations such as poor resolution,and sensitivity, especially in low-light or photon-starved imaging conditions. A photon-counted imaging (PCI) system is often preferred to overcome this limitation. It is known that PCI systems leverage photon detection techniques to capture high-resolution 3D spatial information with exceptional sensitivity and resolution. To achieve this, single-photon detectors are used to count/detect (typically from single to a few hundred) photons from extremely low light level imaging conditions. This paper provides a comprehensive overview of PCI-based 3D imaging systems aimed at overcoming the limitations of the conventional 3D imaging systems. In addition to this, we also discuss some of the add-on applications of PCI systems, including information security, denoising, and resolution enhancement. This article comprises three major sections with four topics to provide an overview of recent research activities using photon-counted imaging systems.
Broadband supercontinuum generation mediated by non-adiabatic mode dispersion profiles resulting in new type of soliton dynamics in dispersion-designed antiresonant hollow-core fibers is reported. A new concept of soliton explosion is demonstrated in experiment and simulation.