Jingjing Liu

Jingjing Liu

Auto-generated profile, based on publicly available information

Jingjing Liu

School of Electronics and Communication Engineering, Sun Yat-sen University, Shenzhen, China

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 November 2018 in IEEE Internet of Things Journal
Verified
Journal Article
Closed access
JLJingjing Liu
Jingjing Liu
GFGrahame Faulkner
Grahame Faulkner
BCBhaskar Choubey
Bhaskar Choubey
SCSteve Collins
Steve Collins
DODominic C. O'BRien
Dominic C. O'BRien
Using optical communications for smart dust applications enables small size of transceivers and offers a potentially large power advantage over RF. This paper presents an optically powered transceiver, which consists of on-chip solar cells, an optical receiver, a storage capacitor and a passive transmitter formed by a liquid crystal modulator and a modulated retro-reflector (MRR). The transceiver circuit system has been fabricated using a standard 0.18μm CMOS process and the circuit area is 1*1.7mm² excluding the MRR. Measurement results show that the complete transceiver can successfully work for 1kbps downlink and 10bps uplink under 0.5V voltage supply and consume 53nA totally. This indicates the transceiver can work at least in a 10 meter range. It is successfully demonstrated that the transceiver scavenged the power from a 670nm modulated laser beam sent by a base station, extracted clock signal and the encoded data from the beam, decoded two designed instructions, switched the liquid crystal in the MRR and sent responses back to the base station. To the author’s best knowledge, this is the first time to present that an on-chip solar-cell powered transceiver realizes the two-way optical wireless communications for IoT applications.

27 February 2024 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
FYFeng Yan
Feng Yan
JLJingjing Liu
Jingjing Liu
Physiological information provided by bio-potential signals is essential and pivotal for biomedical sensors. As the first stage in the signal chain of the sensor, impedance matching of the analog front-end (AFE) is critical for determining signal integrity. AFEs require high input impedance to minimize the effects of electrode impedance mismatch. A significant problem is that the input impedance is affected by parasitic capacitances from the integrated circuit (IC) package, electrode cables, and internal chips. This paper aims to summarize the development of AFE impedance boosting techniques for bio-potential monitoring. The scope of this work includes a review of common architectures for instrumentation amplifiers (IA), mechanisms for input impedance reduction, and a comparison of impedance boosting factors (IBF) employed to evaluate the efficiency of impedance enhancement. Techniques schemes for boosting input impedance in architectures are then surveyed and the contributions and drawbacks of these techniques are discussed. Finally, the state-of-the-art designs of AFE are compared and summarized, along with an analysis of the trend toward enhanced input impedance in bio-electrical signal acquisition. These provide useful references for AFE designers.

16 May 2018 in IEEE Sensors Journal
Verified
Journal Article
Closed access
JLJingjing Liu
Jingjing Liu
GFGrahame Faulkner
Grahame Faulkner
Bhaskar ChoubeyBhaskar Choubey
Bhaskar Choubey
SCSteve Collins
Steve Collins
DODominic C. O'BRien
Dominic C. O'BRien
This paper presents a tunable passband low-power logarithmic photodetector for IoT smart dusts using optical wireless communications. The photodetector can selectively receive optical signals and filter out unwanted optical noise. All the transistors work in the subthreshold region. Each transistor and circuit pole is designed based on theoretical analysis. The output of the photodetector is independent of the absolute illumination intensity and proportional to the modulation depth of the intensity. The photodetector requires a giga-ohm resistor, which is realized by a Gm circuit with an extreme low bias current. The Gm bias voltage can be used to tune the lower cut-off frequency of the passband. The upper cut-off frequency is determined by the photodetector bias and illumination intensity. The photodetector was fabricated using a standard 0.25μm CMOS process and tested under different illumination intensities of 830nm laser. Measurement results showed that the lower cut-off frequency increases as Gm bias and the minimum is approximately 100Hz when Gm bias is 0V. The photodetector output and Gm DC offset matches with theoretical analysis.

29 August 2023 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
JGJian Guan
Jian Guan
JLJingjing Liu
Jingjing Liu
ZLZhipeng Li
Zhipeng Li
WMWenji Mo
Wenji Mo
KSKangkang Sun
Kangkang Sun
FYFeng Yan
Feng Yan
Energy harvesting systems can power microsensors by harvesting energy from the environment. On-chip solar cells made by photodiodes serve as crucial components for highly-integrated energy harvesting systems. To maximize the vertical photoactive area and achieve on-chip solar cells with enhanced photoelectric conversion capabilities, the photoactive area is increased by segmenting the doped region. With the assistance of an approximate model, an optimized segmented triple-well photodiode design is proposed and implemented in a standard 0.18μm bulk CMOS process. Measurement results demonstrate a photoelectric conversion efficiency of 10.16% for the proposed segmented triple-well on-chip solar cell, which represents a 39.94% improvement compared to traditional unsegmented triple-well on-chip solar cells. The short-circuit current is 26.51% higher than that of the traditional one.

28 February 2024 in IEEE Sensors Journal
Verified
Journal Article
Closed access
BXBingjun Xiong
Bingjun Xiong
JYJian Yang
Jian Yang
YWYang Wang
Yang Wang
JGJian Guan
Jian Guan
FYFeng Yan
Feng Yan
JLJingjing Liu
Jingjing Liu
Fluorescence optical fiber temperature sensors have found widespread use in harsh environments with electromagnetic interference, high voltages, flammability and combustibility due to their excellent insulating properties. However, conventional fluorescence detection systems are constructed from discrete photodiode and other front-end circuit chips, which cause bulky size, inferior detection efficiency and degraded signal-to-noise performance. To address these issues, an integrated optical front-end circuit for fluorescence detection was proposed. The front-end circuit monolithically integrated a ring-gate-isolated photodiode (RGI-PD) device, a transimpedance amplifier (TIA), and a bandgap reference (BGR) circuit. The RGI-PD enabled detection of the fluorescence afterglow signals, while the TIA circuit converted the photocurrent generated by the RGI-PD into a measurable photovoltage output. The RGI-PD utilized a P-well guard ring structure to prevent edge breakdown by isolating the avalanche region from the shallow trench. The dummy ring-gate created an inverted pyramid hole profile, focusing the electric field on the planar junction to enhance photodetection, which reduced trapping effects and dark counts. The proposed front-end circuit was fabricated using a standard 0.18 μm Bipolar CMOS DMOS (BCD) process. The measurement results demonstrated that the avalanche breakdown voltage of the RGI-PD was 13.05 V. The front-end circuit achieved a responsivity of 17.29 A/W at 500 nm wavelength, under a 13.88 V reverse bias voltage applied on the RGI-PD. Moreover, the front-end’s dark voltage measured 0.908 V, with an optimal temperature coefficient of 41.01 ppm/°C within the temperature range of -40 °C to 85 °C. The proposed front-end circuit was suitable for fluorescence fiber temperature sensing applications.

17 February 2025 in Communications Engineering
Verified
Journal Article
Open access
PDF file
JGJian Guan
Jian Guan
JLJingjing Liu
Jingjing Liu
WMWenji Mo
Wenji Mo
BXBingjun Xiong
Bingjun Xiong
KSKangkang Sun
Kangkang Sun
BCBhaskar Choubey
Bhaskar Choubey
Enhancing the photoelectric conversion efficiency of on-chip solar cells is crucial for advancing solar energy harvesting in self-powered smart microsensors for Internet of Things applications. Here we show that adopting a center electrode (CE) layout instead of a ring electrode (RE) effectively reduces the shadowing effect of surface electrodes. Using a standard 0.18 μm CMOS process, we fabricated a 0.01 mm² segmented triple-well on-chip solar cell with CEs and highly doped interconnections. Measurements demonstrate a photoelectric conversion efficiency of 25.79% under solar simulator illumination, a 17.49% improvement over conventional designs. This on-chip solar cell is used for on-chip energy harvesting, achieving a maximum end-to-end conversion efficiency of 10.20%, referring to the overall efficiency from incident light power to load power output. The proposed energy harvesting system reliably provides a stable 1 V output to the load, even under varying illumination and load conditions.