The implementation of algorithms for acoustic source localization on edge platforms for the Internet of Things (IoT) is gaining momentum. Applications based on acoustic monitoring can greatly benefit from efficient implementations of such algorithms, enabling novel services for smart homes and buildings or ambient-assisted living. In this context, this work proposes extreme low-cost sound source localization system composed of two microphones and the low power microcontroller module ESP32. A Direction-Of-Arrival (DOA) algorithm has been implemented taking into account the specific features of this board, showing excellent performance despite the memory constraints imposed by the platform. We have also adapted off-the-shelf low-cost microphone boards to the input requirements of the ESP32 Analog-to-Digital Converter. The processing has been optimized by leveraging in parallel both cores of the microcontroller to capture and process the audio in real time. Our experiments expose that we can perform real-time localization, with a processing time below 3.3 ms.
28 January 2019 in IEEE Internet of Things Journal
The rapid development of the Internet of Things (IoT) has posed important changes in the way emerging acoustic signal processing applications are conceived. While traditional acoustic processing applications have been developed taking into account high-throughput computing platforms equipped with expensive multichannel audio interfaces, the IoT paradigm is demanding the use of more flexible and energy-efficient systems. In this context, algorithms for source localization and ranging in wireless acoustic sensor networks can be considered an enabling technology for many IoT-based environments including security, industrial and health-care applications. This paper is aimed at evaluating important aspects dealing with the practical deployment of IoT systems for acoustic source localization. Recent Systems-On-Chip (SoC) composed of low-power multicore processors, combined with a small graphics accelerator (or GPU), yield a notable increment of the computational capacity needed in intensive signal processing algorithms while partially retaining the appealing low power consumption of embedded systems. Different algorithms and implementations over several state-of-the-art platforms are discussed, analyzing important aspects such as the trade-offs between performance, energy efficiency and exploitation of parallelism by taking into account real-time constraints.
17 November 2021 in IEEE Transactions on Nuclear Science
Nowadays, high-performance microprocessors are demanded in many fields, including those with high-reliability requirements. Commercial microprocessors present a good tradeoff between cost, size, and performance, albeit they must be adapted to satisfy the reliability requirements when they are used in harsh environments. This work presents a high-end multiprocessor hardened with macrosynchronized lockstep and additional protections. A commercial dual-core Advanced RISC Machine (ARM) cortex A9 has been used as a case study and a complete hardened system has been developed. Evaluation of the proposed hardened system has been accomplished with exhaustive fault injection campaigns and proton irradiation. The hardening approach has been accomplished for both baremetal applications and operating system (OS)-based. The hardened system has demonstrated high reliability in all performed experiments with error coverage up to 99.3% in the irradiation experiments. Experimental irradiation results demonstrate a cross-sectional reduction of two orders of magnitude.
In the audio signal processing field, multiple IIR filters are required in many applications. As an example, equalizing a Wave Field Synthesis system requires massive filter processing in real time. Graphics Processing Units (GPUs) are well known for their potential in highly parallel data processing. Up to now, the use of the GPUs for implementing IIR filters has not been clearly tackled in audio processing because of its feedback loop that prevents its total parallelization. However, using the Parallel form of IIR filters, this feedback is reduced, since every single sample is computed in a parallel way. This paper analyzes the performance of multiple IIR filters using GPUs and compares it with a powerful multi-core computer. The proposed GPU implementation can run up to 1256 concurrent IIR filters of order 256th in real time, which means 321,536 total filter order, with a latency time of 0.72 ms (sampling frequency of 44.1 kHz). This demonstrates that GPUs are well suited for computing massive IIR filtering.