Hazelnut husk is widely available as a biowaste in the northeast of Turkey. In this study, biocomposites were manufactured using hazelnut husk, polypropylene, and coupling agent. Density, thickness swelling, water absorption, modulus of rupture, modulus of elasticity, tensile strength, tensile modulus, and elongation at break tests were carried out to determine its performance properties. The results obtained in this study indicated that the performance properties of the biocomposites manufactured from hazelnut husk could be comparable to neat PP composites. The biowaste-loading level positively affected the modulus properties of the biocomposites. It could be concluded that the hazelnut husk could be used as an alternative raw material to produce new biocomposites so that biowaste could be recycled. It can also help sustainable protection of nature.
11 August 2022 in Wood Material Science & Engineering
The aim of this study was to examine the chemical, anatomical, physical, and mechanical properties of Marchalina hellenica Genn.-infested Pinus brutia Ten. wood. Studies were carried out on wood samples taken from uninfested trees, those with low M. hellenica infestation, and those with high infestation. In the P. brutia wood heavily infested with M. hellenica, statistically significant decreases were found in the holocellulose and α-cellulose ratios, the tracheid number in latewood, the growth ring width in earlywood and latewood, and the density and strength values. However, the density and strength values of the P. brutia wood samples that were not infested and those with low M. hellenica infestation did not statistically differ from one another.
27 December 2023 in Drewno. Prace Naukowe, Doniesienia, Komunikaty = Wood. Research Papers, Reports, Announcements
Enerji temini ve maliyeti her geçen gün daha çok ön plana çıkmaktadır. Bununla birlikte üretiminde ve tüketiminde çevreye olan etkileri de, maliyet ve temini kadar önemli hale gelmiştir. Bu yüzden mevcut enerji türlerine alternatif olarak rüzgâr, güneş, dalga gibi doğal ve sürdürülebilir enerji kaynakları yerini almaya başlamıştır. Enerji kullanımındaki bu değişim, ahşap endüstrisine de yansımaktadır. Bu çalışmada, masif ahşabın kurutulması için ısı kaynağı olarak güneş enerjisini kullanan bir kurutma fırının kurutma performansı incelenmiştir. Bu kapsamda güneş enerjisi bakımından nispeten önemli bölgelerden olan Muğla şehrinde yer alan güneş kolektörlü bir fırında, iki farklı kalınlıktaki Kızılçam keresteleri kurutulmuştur. Yapılan denemeler sonucunda; istenen sonuç rutubetine, büyük oranda kereste kalitesi korunarak ulaşılmıştır. Diğer yöntemlere oranla biraz daha uzun sürede kurutulmalarına karşın, en az %30 enerji tasarrufu sağlandığı söylenebilir. Sonuç olarak bu alanda kullanılan diğer enerji türleriyle karşılaştırıldığında, temiz bir enerji türü olan güneş enerjisi ile düşük maliyetli ve kaliteli bir kurutma yapılabildiği görülmüştür.
26 February 2021 in Eurasian Journal of Forest Science
Odun dışı orman ürünlerinden ağaç kabuğu bulunurluğu, üretim kolaylığı ve genellikle atık olarak görülmesi nedeniyle yeterince değerlendirilememektedir. Kompozit malzeme üretiminde en fazla %10 civarında kullanılırken yapıştırıcı üretimi, boyar madde vb. alanlarda da kullanılmaktadır. Bu çalışmada, dolgu maddesi olarak ülkemizde en fazla yayılım gösteren ve kabuk oranı fazla olan ağaçlardan, karaçam kabuğu, polimer malzeme olarak ise Polivinil Klorür (PVC) kullanılmıştır. Kullanılan karışım oranı %50-50 olacak şekilde ayarlanmıştır. Üretilen ahşap plastik kompozit (APK) malzemelerden ahşap mobilya birleştirmelerini temsil eden T-tipi ve H- tipi birleştirmeler üretilerek teste tabi tutulmuştur. APK malzemeden zıvanalı, kavelalı ve yekpare birleştirmeler üretilmiş olup bunlar üzerinde mukavemet testleri yapılmıştır. Elde edilen APK malzemenin, çalışmanın tüm testlerinde iyi bir performans göstermesi, çevreye duyarlı bir ürün olması ve ekonomik değerinin yüksek olması önem arz etmektedir. Bununla beraber ağaç kabuğu kullanılan APK malzemenin hem plastik sektörüne hem ahşap sektörüne hitap etmesinden dolayı geniş bir pazar sahası bulabileceği düşünülmektedir.
22 May 2026 in Drewno. Prace Naukowe, Doniesienia, Komunikaty = Wood. Research Papers, Reports, Announcements
This study aimed to enhance the outdoor performance and thermal properties of wood-plastic composites (WPCs) by incorporating of nanoparticles (NPs). Titanium dioxide (TiO2) was selected as one of the preferred NPs and was added to the matrix in concentrations up to 10%. This addition improved the mechanical properties of WPCs due to the high interaction between TiO2 and the composite components. Furthermore, the high reflectivity properties of TiO2 improved the surface color stability of WPCs. Even under intensive UV light exposure, the surface color changes in WPCs containing TiO2 were more moderate compared to control samples. Microscopic analysis indicated that TiO2 NPs significantly reduced crack formation. Although surface erosion was not completely inhibited, it was reduced. The condensation cycle of weathering weakened the bonds between the wood and polymer, leading to mechanical losses. Scanning electron microscopy (SEM) images revealed micro-cracks, which explained the decreased mechanical properties of reinforced WPCs. However, the decrease was limited to 0.46% for composites containing 5% TiO2. The TiO2 NPs also acted as a thermal barrier, retarding thermal degradation, which occurred more moderately compared to controls. Additionally, the fire performance of reinforced WPCs was enhanced by TiO2 NPs, which improved char formation and increased the limit oxygen index (LOI) values to 25.9% O2.