Carlos Gonzales

Carlos Gonzales

Auto-generated profile, based on publicly available information

Carlos Gonzales

Centro Peruano Japonés de Investigaciones Sísmicas y Mitigación de Desastres, Facultad de Ingeniería Civil, Universidad Nacional de Ingeniería, 1150 Av. Tupac Amaru, Rimac, Lima 15333, Peru

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2023 in Journal of Disaster Research
Verified
Journal Article
Open access
JTJuan Carlos Tarazona
Juan Carlos Tarazona
ZAZenon Aguilar
Zenon Aguilar
Nelson PulidoNelson Pulido
Nelson Pulido
CGCarlos Gonzales
Carlos Gonzales
FEFern
Fern
FLFernando Lazares
Fernando Lazares
In seismic design, intensity parameters that represent seismic demand are commonly used. A probabilistic seismic hazard assessment is an accurate way of assessing seismic demand, based on a set of parameters that represent the seismicity of a region. However, because some regions lack sufficient information, the selection of these parameters can be controversial. In Peru, selecting a maximum earthquake magnitude (Mmax) for regional seismic hazard assessments has proven to be a challenging task due to the limited available information concerning of large-magnitude events. This study evaluated the Mmax for subduction earthquakes using scaling relationships, empirical evidence, and the extreme value statistics (Kijko and Bayesian) approach. The seismic catalog was updated to February 2022 and divided into 19 subduction seismic sources (5 interface and 14 intraslab). The results showed that the obtained Mmax are within the range of Mw 8.7–9.0 for the interface and Mw 7.6–8.1 for the intraslab sources, which unlike the Mmax values established in previous regional seismic hazard assessments, are more consistent with the historical and instrumental seismicity and rupture models.

1 June 2023 in Journal of Disaster Research
Verified
Journal Article
Open access
Hiroyuki MiuraHiroyuki Miura
Hiroyuki Miura
CGCarlos Gonzales
Carlos Gonzales
MDMiguel Diaz
Miguel Diaz
Miguel EstradaMiguel Estrada
Miguel Estrada
FEFern
Fern
FLFernando Lazares
Fernando Lazares
Evaluation of site amplification factors (SAFs) of seismic waves has been one of the important issues for evaluating seismic hazards. The authors have proposed a deep neural network (DNN) model in order to cost-effectively and accurately estimate SAF from microtremor horizontal-to-vertical spectral ratio (MHVR). In this study, we assessed the SAFs in southern Lima, Peru by estimating from MHVRs and DNN. First, we validated the applicability of the DNN model to Lima by estimating the SAFs from the MHVRs observed at seismic stations in Lima. From the comparison with the observed SAFs derived from spectral inversion technique, we confirmed that the SAFs in Lima were accurately estimated by the DNN model. The SAFs in the southern Lima including Chorrillos and Villa El Salvador districts were evaluated by applying the DNN model to the observed MHVRs at approximately 250 sites. We found that large amplifications at low frequency around 1 Hz were expected in the southeastern coastal areas formed by eolian sands whereas smaller amplification were estimated in the northwestern areas mainly located on alluvial deposits.

1 June 2023 in Journal of Disaster Research
Verified
Journal Article
Open access
CGCarlos Gonzales
Carlos Gonzales
RGRoger Garay
Roger Garay
Luis MoyaLuis Moya
Luis Moya
FEFern
Fern
OLo Lazares
o Lazares
FLFernando Lazares
Fernando Lazares
The conjunction of seismic records and site effect parameters can lead to the adequate estimation of seismic indexes in urban areas. In this regard, this study uses the map of soil amplification factors obtained in previous studies and the availability of time history waveforms at different locations throughout Metropolitan Lima and Callao to estimate the geospatial distribution of maximum values of horizontal acceleration after the occurrence of earthquakes. Results for three earthquakes of intermediate magnitude and distinct epicenter locations are publicly available in an online system created within the framework of this study (Amaru Peru) and showed that amplified motions could be mainly observed in the lowlands of populated slopes as well as in the eolian sandy deposits.

8 August 2022 in TECNIA
Verified
Journal Article
Open access
PDF file
ACAngel Leandro Ccahua-Laqui
Angel Leandro Ccahua-Laqui
CGCarlos Eduardo Gonzales-Trujillo
Carlos Eduardo Gonzales-Trujillo
LMLuis Angel Moya-Huallpa
Luis Angel Moya-Huallpa
LRLuis Fernando Lazares-La Rosa
Luis Fernando Lazares-La Rosa
Fumio YamazakiFumio Yamazaki
Fumio Yamazaki
Strong motion records are important for improving seismic design, damage assessment and analysis of earthquake effects. Despite the relevance of having strong motion networks, their implementation in Peru has been performed in the very recent years. For instance, only five strong motion stations in Lima recorded the 2007 Mw 7.9 Pisco earthquake, whereas 55 stations recorded the 2021 Mw 6.0 Mala earthquake. The current number of instrumentations in Lima city provides an opportunity to improve soil characterization. This study aims to determine the dominant frequency (fd) of the seismic stations located in Metropolitan Lima. The procedure we adopted, first considered collecting, for an arbitrary station, all the available events recorded from 2011-2021, including the 2007 Mw 7.9 Pisco earthquake. Then, the pseudo spectral acceleration, using 5% damping, for each component were computed, and the horizontal-to-vertical (H/V) spectral ratios were calculated. Finally, the average H/V spectral ratio was used to adequately characterize the values of fd . In total, we evaluated 51 stations throughout Lima city. Values of fd lower than 1 Hz were observed for the coastal areas in which the underlying soil consist of clayey/sandy deposits and regions with an important impedance contrast in the deeper part of the substructure. These values increment towards the center of the city coinciding with surficial gravel deposits.

1 December 2025 in Journal of Disaster Research
Verified
Journal Article
Closed access
GCGerson Carrasco
Gerson Carrasco
HYHiroaki Yamanaka
Hiroaki Yamanaka
ZAZenon Aguilar
Zenon Aguilar
CGCarlos Gonzales
Carlos Gonzales
HKHisao Kondo
Hisao Kondo
KCKosuke Chimoto
Kosuke Chimoto
Eight shear wave velocity profiles of deep sedimentary layers in Lima, Peru, were determined using seismic interferometry. To achieve this objective, seven high-sensitivity sensors monitoring continuous ground motion were installed. Sensor data allowed the extraction of Green’s functions through cross-correlation analysis in the frequency domain. It was determined that continuous recording data with a minimum of 2,000 h (equivalent to three months) is necessary to obtain a Green’s function approximation. Dispersion curves of surfaces from 0.3 to 2 s were obtained from maximum values of Green’s functions between two stations after applying Gaussian filters. Thus, obtaining deep soil profiles through the inversion of dispersion curves extended to periods of around 1 s is possible. Finally, the estimated profiles were verified by comparing their theoretical ellipticity curves with H/V spectral ratios of microtremors, finding a good match for periods up to 1 s. These profiles reach depths and S-wave velocities of up to 600 m and 3,000 m/s, respectively.

1 December 2025 in Journal of Disaster Research
Verified
Journal Article
Closed access
CCCinthia Calderon
Cinthia Calderon
ZAZenon Aguilar
Zenon Aguilar
GCGerson Carrasco
Gerson Carrasco
JTJuan C. Tarazona
Juan C. Tarazona
CGCarlos Gonzales
Carlos Gonzales
HKHisao Kondo
Hisao Kondo
The seismic response evaluation of soil deposits in Metropolitan Lima requires analysis methods that can capture local amplification effects, owing to the region’s complex alluvial stratigraphy and high seismicity. This study performs a comparative assessment of four site response analysis methods using records from the 2021 Mala (M w 6.0) earthquake, located south of Lima: (1) normative amplification factors (NAF E.030), (2) ground motion models (GMM), (3) average amplification factors (AAF), and (4) one-dimensional wave propagation analysis (1DPA). Performance was evaluated using root mean square error (RMSE) between observed and predicted response spectra as the primary accuracy metric. A total of 31 accelerographic stations were analyzed, classified by time-averaged shear wave velocity of the top 30 m soil layers (V s 30) into three categories: stiff (S1’: 550–800 m/s), intermediate (S2 ′ : 350–550 m/s), and soft (S3’: 200–350 m/s) soils. Linear elastic soil behavior was confirmed through 1DPA, indicating maximum shear strains below 0.01% across all sites, well within the elastic threshold. The results revealed that 1DPA analysis produced the most accurate estimates, with average RMSE values of 27.4 cm/s 2 for S1’ soils and 38.5 cm/s 2 for S2’ soils. NAF E.030 performed well in 8 out of 10 stiff soil sites (RMSE =33.1 cm/s 2 ), however, exhibited significant limitations in softer soils where RMSE values exceeded 37 cm/s 2 . GMM and AAF methods demonstrated RMSE values ranging from 44.8 to 51.4 cm/s 2 , with reduced accuracy in long-period ranges (>1.0 s) and S3’ soil sites. These findings highlight the need to revise current normative amplification factors for soft soils and support the implementation of 1DPA analysis in areas with complex stratigraphy or deep sedimentary deposits, thereby contributing to improved seismic-resistant design practices in Metropolitan Lima.