9 November 2015 in IEEE Transactions on Power Electronics
With increasing penetration of the renewable energy, the grid-tied PWM inverters need to take corresponding responsibilities for the security and stability of future grid, behaving like conventional rotational synchronous generator (RSG). Therefore, recognizing the inherent relationship and intrinsic differences between inverters and RSGs is essential for such target. By modeling the typical electromechanical transient of grid-tied PWM inverters, this paper first proves that PWM inverters and RSGs are similar in physical mechanism and equivalent in mathematical model, and the concept of static synchronous generator (SSG) is thereby developed. Furthermore, the comprehensive comparison between RSG and SSG is carried out in detail, and their inherent relation is built. Based on these findings, the rationality and feasibility of migrating the concepts, tools, and methods of RSG stability analysis to investigate the dynamic behaviors and stability issues of SSG is therefore confirmed. Taking stability issues as an example, the criteria of small signal and transient stability of a typical grid-tied PWM inverter is put forward to demonstrate the significance of the developed SSG model (including synchronizing coefficient, damping coefficient, inertia constant, and power-angle curve), providing clear physical interpretation on the dynamic characteristics and stability issues. The developed SSG model promotes grid-friendly integration of renewable energy to future grid and stimulates interdisciplinary research between power electronics and power system.
12 June 2019 in IEEE Electron Device Letters
In this letter, we present normally-off GaN-on-Si MOSFETs based on the combination of tri-gate with a short barrier recess to yield a large positive threshold voltage (VTH), while maintaining a low specific on resistance (RON,SP) and high current density ( ID ). The tri-gate structure offered excellent channel control, enhancing the VTH from +0.3 V for the recessed to +1.4 V for the recessed tri-gate, along with a much reduced hysteresis in VTH, and a significantly increased transconductance (gm). Additional conduction channels at the sidewalls of the tri-gate trenches compensated the degradation in ON resistance (RON) from the gate recess, resulting in a small RON of 7.32 ± 0.26 Ω.mm for LGD of 15 μm, and an increase in the maximum output current ( ID max ). In addition, the tri-gate inherently integrates a gateconnected field-plate (FP), which improved the breakdown voltage (VBR) and reduced the degradation in dynamic RON. With proper passivation techniques, these devices could be very promising as high performance power switches for future power applications.
30 January 2019 in IEEE Electron Device Letters
11 September 2015 in IEEE Transactions on Power Electronics
Conventional orthogonal signal-generation methods for single-phase grid suffer from long response time, approximation errors, and/or noise amplification. To remedy this problem, a novel orthogonal signal-generation algorithm, which is characterized by remarkable response speed, high accuracy, noise immunity, and easy implementation, is developed in this paper. The developed algorithm can precisely calculate the orthogonal signal within about 2.5 ms when the amplitude/phase of the grid signal changes suddenly, under the premise of not significantly increasing the computational burden compared with the conventional methods. Far more important is that the high accuracy of the proposed method is independent of the system sampling frequency; hence, effectively avoiding the approximation errors in a wide range of sampling frequencies. In addition, it is shown how the noise amplification issue caused by the developed algorithm, which is nearly equal to that of the first-order differentiating method, can be effectively solved by proper time-span scaling and restricted into an acceptable range. Finally, the validity and advancement of the developed algorithm are verified by experimental results.