17 October 2011 in Physical Chemistry Chemical Physics
Understanding the chemical vapor deposition (CVD) kinetics of graphene growth is important for advancing graphene processing and achieving better control of graphene thickness and properties. In the perspective of improving large area graphene quality, we have investigated in real-time the CVD kinetics using CH4–H2 precursors on both polycrystalline copper and nickel. We highlighted the role of hydrogen in differentiating the growth kinetics and thickness of graphene on copper and nickel. Specifically, the growth kinetics and mechanism is framed in the competitive dissociative chemisorption of H2 and dehydrogenating chemisorption of CH4, and in the competition of the in-diffusion of carbon and hydrogen, being hydrogen in-diffusion faster in copper than nickel, while carbon diffusion is faster in nickel than copper. It is shown that hydrogen acts as an inhibitor for the CH4 dehydrogenation on copper, contributing to suppress deposition onto the copper substrate, and degrades quality of graphene. Additionally, the evidence of the role of hydrogen in forming C–H out of plane defects in CVD graphene on Cu is also provided. Conversely, resurfacing recombination of hydrogen aids CH4 decomposition in the case of Ni. Understanding better and providing other elements to the kinetics of graphene growth is helpful to define the optimal CH4/H2 ratio, which ultimately can contribute to improve graphene layer thickness uniformity even on polycrystalline substrates.
15 July 2003 in The Journal of Physical Chemistry B
1 October 2009 in Solar Energy Materials and Solar Cells
1 January 2002 in Journal of Vacuum Science & Technology A
Indium–tin–oxide (ITO) films deposited by sputtering and e-gun evaporation on both transparent (Corning glass) and opaque (c-Si, c-Si/SiO2) substrates and in c-Si/a-Si:H/ITO heterostructures have been analyzed by spectroscopic ellipsometry (SE) in the range 1.5–5.0 eV. Taking the SE advantage of being applicable to absorbent substrate, ellipsometry is used to determine the spectra of the refractive index and extinction coefficient of the ITO films. The effect of the substrate surface on the ITO optical properties is focused and discussed. To this aim, a parametrized equation combining the Drude model, which considers the free-carrier response at the infrared end, and a double Lorentzian oscillator, which takes into account the interband transition contribution at the UV end, is used to model the ITO optical properties in the useful UV–visible range, whatever the substrate and deposition technique. Ellipsometric analysis is corroborated by sheet resistance measurements.
5 May 2003 in Applied Physics Letters
The dielectric function of nanocrystalline silicon (nc-Si) with crystallite size in the range of 1 to 3 nm has been determined by spectroscopic ellipsometry in the range of 1.5 to 5.5 eV. A Tauc–Lorentz parameterization is used to model the nc-Si optical properties. The nc-Si dielectric function can be used to analyze nondestructively nc-Si thin films where nanocrystallites cannot be detected by x-ray diffraction and Raman spectroscopy.
27 August 2007 in Applied Physics Letters
Erbium oxide films have been deposited by metal organic chemical vapor deposition on Si(001) using tris(isopropylcyclopentadienyl)erbium. The impact of Si surface passivation by the metal organic prior growth initiation was investigated. The correlation between the films structure, the optical response, the static dielectric constant , and density of interface traps is discussed. An Er-silicate interfacial layer with a thickness of , a static dielectric constant of 10–12.4, and a density of interface traps of measured for a film with a physical thickness of (with an equivalent oxide thickness of ) render an interesting candidate as a high- dielectric.