4 December 2018 in IEEE Transactions on Power Electronics
Due to the superior material properties, SiC MOSFET is a promising candidate switching device for high power density and high efficiency power conversion system. The robustness of switching device under extreme temperature condition becomes a crucial factor to ensure power conversion system safely and continuously operating. In this paper, the temperature dependence of dynamic performance of 1.2 kV 4H-SiC power MOSFETs is systematically characterized over such wide temperature range of 90K to 493K and compared with 1.2kV Si IGBT by a layout optimized double pulse tester (DPT). The degradation of dynamic on-resistance related interface traps is analyzed specially and the energy loss caused by degradation is quantified at cryogenic temperatures. Besides, to validate the performance of SiC MOSFET under safely and continuously operating conditions for cryogenic temperature application, a hard switched non-isolated DC-DC buck converter is designed and tested to estimate temperature dependence of conversion efficiency under temperature range of 90K to 290K. Moreover, the further characterizations are conducted with gate resistance range of 2° to 20°, load current range of 3-30A and converter output current of 5-22.5A under different switching frequency (up to 150kHz) to validate high power and high frequency application potential of SiC MOSFET.
3 April 2019 in IEEE Transactions on Electron Devices
In this paper, an improved 4H-SiC U-shaped trench-gate metal-oxide-semiconductor field-effect transistors (UMOSFETs) structure with low on-resistance (Ron) and switching energy loss is proposed. The novel structure features an added n-type region, which reduces on-resistance of the device significantly while maintaining the breakdown voltage (VBR). In addition, the gate of the improved structure is designed as a p-n junction to reduce the switching energy loss. Simulations by Sentaurus TCAD are carried out to reveal the working mechanism of this improved structure. For the static performance, the on-resistance and the figure of merit (FOM = VBR²/Ron) of the optimized structure are improved by 40% and 44%, respectively, as compared to a conventional trench MOSFET without the added n-type region and modified gate. For the dynamic performance, the turn-on time (Ton) and turn-off time (Toff) of the proposed structure are both shorter than that of the conventional structure, bringing a 43% and 30% reduction in turn-on energy loss and total switching energy loss (ESW).
6 September 2019 in IEEE Transactions on Electron Devices
30 October 2020 in IEEE Transactions on Power Electronics
The avalanche ruggedness of power devices becomes a crucial issue to ensure the safe operation of the power conversion systems, particularly under the extreme temperature conditions. In this paper, the avalanche capability of SiC planar/trench MOSFETs is systematically evaluated and analyzed over the temperature range of 90 to 340 K. Importantly, the essential mechanisms and temperature dependence of avalanche failure under cryogenic conditions are further explored by combining many analysis methods such as TCAD simulations, the unclamped inductive switching characterizations, and the transient junction temperature prediction. The highest avalanche energy density of 171.24 mJ/mm2 at 90K indicates the great application potential of SiC planner MOSFET in cryogenic electronics. Moreover, the safe avalanche operation boundary (AOB) model is established over the cryogenic temperature range. The relevant analysis method and AOB model can be used to accurately evaluate and quantitatively predict the avalanche capability of SiC planar/trench MOSFETs for the cryogenic converter design.
17 February 2021 in IEEE Transactions on Electron Devices
A novel post-oxidation annealing (POA) process with supercritical N 2 O (SCN 2 O) fluid is reported to be highly effective in improving the interface properties of the SiO 2 /4H-silicon carbide (SiC) (0001) systems. After SCN 2 O POA, the interface state density reduces to 2.8 ×10 11 eV -1 cm -2 , which is about 3.5 times lower than that after a traditional high-temperature N 2 O POA process. Meanwhile, the highest oxide critical electric field shows an increase of 18.19% and the near-interfacial oxide traps is reduced by 69.90% compared with that after N 2 O POA process. The process temperature is as low as 120 °C. The significantly reduced processing temperature avoids additional defect generation while the supercritical state provides a stronger nitridation effect. SCN 2 O annealing is a promising candidate for POA process toward high-performance SiC power metal-oxide-semiconductor field effect transistors (MOSFETs).
1 December 2023 in IEEE Transactions on Power Electronics
For 4H-SiC mosfet s, the parasitic PiN body diode causes problems such as significant forward voltage drop of body diode and poor reverse recovery characteristics during high-temperature operation. A reasonable solution is a mosfet with an integrated Schottky barrier diode to deactivate the PiN body diode. Since SiC mosfet s can operate at extremely high temperatures, the characterization of electrical parameters at high temperatures and changing with the temperature are very important for high power applications and system reliability. However, there is a lack of comparison and analysis of the two devices on electrical properties at ultrahigh temperatures. In this article, a 1.2 kV conventional mosfet and a mosfet integrated with a junction barrier Schottky diode (JBSFET) were fabricated with a consistent process flow. In the temperature range from 300 to 575 K, analytical models of the temperature-dependent electrical parameters of these two devices were established and compared, which were successfully verified by the measurements. These models can provide guidance for ultrahigh temperature applications of JBSFETs. Temperature-related expressions can also be used for junction temperature monitoring of temperature-sensitive electrical parameters. Experimental results show that JBSFET has better third quadrant conduction characteristics and higher temperature stability below 450 K, but loses obvious performance advantages at 575 K. So, the recommended operating temperature range of JBSFET is from 300 to 450 K. Finally, the continuous operation performance of the body diodes in buck converters is analyzed. The higher efficiency of buck converter based on JBSFET's body diode indicates its great application potential in compact converters, especially in the recommended temperature range.