Pabitro Ray

Pabitro Ray

Auto-generated profile, based on publicly available information

Pabitro Ray

Department of Civil, Environmental and Geomatic Engineering, Institute of Geodesy and Photogrammetry

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 December 2017 in Journal of Lightwave Technology
Verified
Journal Article
Open access
ZYZhisheng Yang
Zhisheng Yang
MSMarcelo Soto
Marcelo Soto
DCDesmond M. Chow
Desmond M. Chow
PRPabitro Ray
Pabitro Ray
LTLuc Thevenaz
Luc Thevenaz
A Brillouin optical time-domain analysis (BOTDA) method based on a closed-loop control system is proposed to track fast variations of the Brillouin frequency shift along the sensing fiber. Whilst the method eliminates the gain spectral scanning, the exact distributed Brillouin frequency profile is retrieved directly from the output of a closed-loop controller with no need of post-processing. Moreover, as the operating frequency is being continuously updated to follow the Brillouin frequency change, an unlimited temperature or strain measurement range can be achieved. Both theoretical analysis and experimental results validate that the closed-loop controlled BOTDA acts as a low-pass filter that considerably rejects the noise from photodetector, with an efficiency which fundamentally outperforms basic averaging. By optimizing the closed-loop parameters, the measurement time is reduced from a few minutes to a couple of seconds compared with standard BOTDA, i.e., two orders of magnitude improvement in terms of measurement speed, while keeping the same accuracy and measurement conditions. If the sampling time interval that is limited by our instrument can be further reduced, the method offers the potentiality of km-range sensing with sub-second measurement time, with an unmatched favorable trade-off between measurand accuracy and closed-loop delay.

21 September 2023 in Optics Express
Verified
Journal Article
Closed access
PRPabitro Ray
Pabitro Ray
DMDavid Salido Monzú
David Salido Monzú
SCSandro L. Camenzind
Sandro L. Camenzind
AWAndreas Wieser
Andreas Wieser
Hyperspectral LiDAR enables non-contact mapping of the 3D surface geometry of an object along with its spectral reflectance signature and has proved to be effective for automated point cloud segmentation in various remote sensing applications. The established hyperspectral LiDAR methods offer a range precision of a few mm to a few cm for distances exceeding several meters. We propose a novel approach to hyperspectral LiDAR scanning based on a supercontinuum (SC) coherently broadened from a 780 nm frequency comb. It provides high precision distance measurements along with target reflectance over the 570–970 nm range of the SC output. The distance measurements are carried out by monitoring the differential phase delay of intermode beat notes generated by direct photodetection, while the backscattered light spectrum is acquired using a commercial CCD spectrometer with 0.16 nm resolution across the 400 nm bandwidth of the SC output. We demonstrate a measurement precision below 0.1 mm for a stand-off range up to 50 m on a diffuse target with around 89% reflectance. The measured relative accuracy as compared to a reference interferometer is on the order of 10−5 for distances up to 50 m. Initial results also indicate spectrum-based material classification within a 3D point cloud using a linear support vector machine. The results highlight the potential of this approach for joint high-precision laser scanning and automated material classification.

21 March 2025 in ACS Photonics
Verified
Journal Article
Open access
SCSandro L. Camenzind
Sandro L. Camenzind
LLLukas Lang
Lukas Lang
BWBenjamin Willenberg
Benjamin Willenberg
JPJustinas Pupeikis
Justinas Pupeikis
HSHayk Soghomonyan
Hayk Soghomonyan
CPChristopher R. Phillips
Christopher R. Phillips
Dual-comb ranging has emerged as an effective technology for long-distance metrology, providing absolute distance measurements with high speed, precision, and accuracy. Here, we demonstrate a dual-comb ranging method that utilizes a free-space transceiver unit, enabling dead-zone-free measurements and simultaneous ranging with interchanged comb roles to allow for long-distance measurements, even when the target is moving. It includes a graphics processing unit (GPU)-accelerated algorithm for real-time signal processing and a free-running single-cavity solid-state dual-comb laser with a carrier wavelength λc ≈ 1055 nm, a pulse repetition rate of 1 GHz, and a repetition rate difference of 5.06 kHz. This combination offers a fast update rate and sufficient signal strength to reach a single-shot time-of-flight precision of around 0.1 μm (i.e., <λc/4) on a cooperative target placed at a distance of more than 40 m. The free-running laser is sufficiently stable to use the phase information for interferometric distance measurements, which improves the single-shot precision to <20 nm. To assess the ranging accuracy, we track the motion of the cooperative target when moved over 40 m and compare it to a reference interferometer. The residuals between the two measurements are below 3 μm. These results highlight the potential of this approach for accurate and dead-zone-free long-distance ranging, supporting real-time tracking with nm-level precision.

19 July 2019 in Smart Materials and Structures
Verified
Journal Article
Closed access
PDF file
PRPabitro Ray
Pabitro Ray
Xudong YuXudong Yu
Xudong Yu
ZFZheng Fan
Zheng Fan
BSBalaji Srinivasan
Balaji Srinivasan
PRPrabhu Rajagopal
Prabhu Rajagopal
Composite structures with bends are widely used in aerospace and industrial sectors. However health monitoring of such structures is challenging due to their complex topographical features. Recent literature shows that bends in composite laminates can confine and guide ultrasonic energy along their length, known as feature-guided waves (FGW). This article demonstrates a fiber Bragg grating based technique using FGW modes for defect detection and identification in bent composite laminates. In addition, the effects of defect depth and excitation frequency on the FGW mode reflection coefficient are reported using 3D finite element simulations. Physical insight into the reflection behavior is discussed based on an analysis of mode interaction with part-thickness cracks.

10 February 2025 in Optics Letters
Verified
Journal Article
Open access
SCSandro Camenzind
Sandro Camenzind
ANAlexander Nussbaum-Lapping
Alexander Nussbaum-Lapping
BWBenjamin Willenberg
Benjamin Willenberg
JPJustinas Pupeikis
Justinas Pupeikis
JTJosef Taher
Josef Taher
UKUrsula Keller
Ursula Keller
Hyperspectral LiDAR (HSL) enables the simultaneous acquisition of the surface geometry and spectral signatures of remote natural targets, making it valuable for various applications such as material probing, automated point cloud segmentation, and vegetation health monitoring. We present a first proof-of-concept study of a broadband dual-comb HSL system based on a 1 GHz dual-comb supercontinuum (SC). The SC spans from 820 to 1300 nm, generated via coherent spectral broadening of a free-running single-cavity dual-comb oscillator at 1053 nm in a single nonlinear photonic crystal fiber. The HSL system achieves a sub-µm ranging precision on a non-cooperative target at an update rate of 670 Hz. The shot-noise limited electronic dual-comb interferograms furthermore encode the spectral information of the target reflection across the SC bandwidth. This allows the capture of precise 3D point clouds with spectral signatures, unlocking new possibilities for spectrum-based material classification.

20 March 2024 in Optics Express
Verified
Journal Article
Closed access
PRPabitro Ray
Pabitro Ray
DMDavid Salido Monzú
David Salido Monzú
RPRobert Presl
Robert Presl
JBJemil Avers Butt
Jemil Avers Butt
AWAndreas Wieser
Andreas Wieser
Simultaneous distance measurements on two or more optical wavelengths enable dispersion-based correction of deviations that result from insufficient knowledge of the refractive index along the signal propagation path. We demonstrate a supercontinuum-based approach for highly accurate distance measurements suitable for such an inline refractivity compensation. The distance is estimated from the phase delay observations on the intermode beats. We use a supercontinuum (SC) coherently broadened from a 780 nm frequency comb and spanning the spectral range of 570-970 nm. Experiments are performed on the 590 and 890 nm wavelength bands filtered from the SC spectrum. Results show distance measurements with standard deviations of around 0.01 mm at 50 m, and a distance-dependent component below 0.2 ppm on the individual spectral bands. Distance residuals compared to a reference interferometer are on the order of 0.1 ppm for displacements up to 50 m. Controlled pressure-induced refractivity variations are created over a length of 15 m, resulting in an optical path length change of 0.4 mm. Using the two-color method, we demonstrate refractivity-corrected distance measurement with a standard deviation of around 0.08 mm for a 60 s averaging window. The current experimental configuration can be easily extended to distance measurements on more than two wavelengths. The results highlight its potential for practical long-distance measurements through inline refractivity compensation.