25 May 2022 in Polymer Testing
31 March 2025 in IEEE Transactions on Industrial Informatics
This article proposes an adaptive control for the power distribution of fuel cell (FC) hybrid electric vehicles. port-Hamiltonian framework is utilized to describe the fuel cell hybrid system dynamics. Then, the controller is designed in the interconnection and damping assignment passivity-based control approach to distribute the power flow between the fuel cell and the battery pack, and the stability of designed controller has been proved. Moreover, an adaptation law is utilized to improve the fuel economy and durability of energy sources, and the battery state of charge is online estimated by a quasi-sliding-mode observer. Finally, simulation and experiments are conducted to verify the performance of proposed controller compared with an equivalent consumption minimization strategy.
1 October 2019 in IOP Conference Series: Materials Science and Engineering
In this study, walnut processing by-product was served as filler to make three-layer plywood, and the physical-mechanical properties were also discussed. The results showed that the formaldehyde emission of plywood corresponding to walnut shell and walnut dregs decreased by 0.0542 mg/L and 0.066 mg/L, respectively. The properties of plywood filled with walnut dregs are better than that of walnut shell filler, and the formaldehyde emission of the corresponding plate is lower. At the same time, compared with flour, the wet bond strength of walnut shell plywood increased by 0.0332 MPa, and that of walnut dregs plywood decreased by 0.123 MPa, but they all met the national standards.
11 June 2026 in IEEE Transactions on Transportation Electrification
To address the challenges of fuel economy and system durability in fuel cell hybrid vehicles, this paper proposes an integrated power management strategy guided by driving style recognition. A real-time passivity-based controller, designed based on the model, is used to meet the load requirement, accurately estimate the unknown load resistance, and minimize fluctuations in the battery state of charge; closed-loop stability and convergence are analyzed using a Lyapunov-based technique. A hierarchical long short-term memory model combined with a convolutional neural network is developed to achieve real-time recognition of driving styles that affect power management strategies. The recognition output is then mapped to a predefined set of control parameters that customize the power management strategy based on the corresponding driving style. Furthermore, an optimization problem is formulated to reduce the total cost of fuel economy and system degradation. Subsequently, an adaptive factor is proposed and embedded into the passivity-based control law to optimize power distribution across different driving styles. Finally, extensive simulations on synthetic and real-world cycles, including the Worldwide Harmonized Light-Duty Test Cycle (WLTC), show that the proposed control reduces the total costs by 11.67% under the prototype-generated driving cycle.