2 February 2022 in IEEE Transactions on Applied Superconductivity
Next generation ion therapy magnets both for gantry and for accelerator (synchrotron) are under investigation in a recently launched European collaboration that, in the frame of the European H2020 HITRI plus and I.FAST programmes, has obtained some funding for work packages on superconducting magnets. Design and technology of superconducting magnets will be developed for ion therapy synchrotron and -especially- gantry, taking as reference beams of 430 MeV/nucleon ions (C-ions) with 10 10 ions/pulse. The magnets are about 60–90 mm diameter, 4 to 5 T peak field with a field change of about 0.3 T/s and good field quality. The paper will illustrate the organization of the collaboration and the technical program. Various superconductor options (LTS, MgB 2 or HTS) and different magnet shapes, like classical CosTheta or innovative Canted CosTheta (CCT), with curved multifunction (dipole and quadrupole), are under evaluation, CCT being the baseline. These studies should provide design inputs for a new superconducting gantry design for existing facilities and, on a longer time scale, for a brand-new hadron therapy centre to be placed in the South East Europe (SEEIIST project).
13 February 2023 in IEEE Transactions on Applied Superconductivity
The Superconducting Ion Gantry (SIG) project is the contribution from INFN (the Italian National Institute for Nuclear Physics) to the international SIGRUM project with the aim of exploring new technological solutions for the critical elements of a 430 MeV/u carbon ion gantry. The project includes the design and construction of a cos $\theta$ 4 T superconducting dipole demonstrator magnet whose main scope is to prove the feasibility of winding and assembling an accelerator magnet type with a relatively small radius of curvature (1.65 m). In addition to the complexity due to the curvature, the target field ramp rate is 0.4 T/s and the cooling system must not adopt liquid helium. This paper discusses the design activities carried out in the last year on the electromagnetic and thermal domains and reports on the present concepts and infrastructure for the first winding trials.
13 January 2020 in IEEE Transactions on Applied Superconductivity
2 February 2024 in IEEE Transactions on Applied Superconductivity
The Superconducting Ion Gantry (SIG) project aims to design, construct, and test a curved superconducting dipole demonstrator magnet for an ion gantry (up to a rigidity of 6.6 Tm). The main demonstrator magnet parameters are a dipolar field of 4 T generated into a toroidal aperture with an 80 mm diameter, 1.65 m curvature radius, and 30° angular sector. The project is inserted in the framework of the EuroSIG collaboration among CNAO, CERN, INFN, and MedAustron. Within this collaboration, the main goal of SIG is to perform a feasibility study of winding and assembling cos- $\theta$ coils with a small curvature radius. In addition, a parallel program at CERN is dedicated to the study of the indirect cooling problem through the construction of a straight thermal demonstrator magnet sharing the SIG cross-section. The basic idea behind these programs is to check whether the vast experience of the community on superconducting accelerator magnets design can lead to a breakthrough in the gantry magnets domain. This article shows the main elements of the conceptual design of the SIG magnet and reports on the first winding trial performed at the LASA laboratory, in Milan, with a copper dummy cable. Moreover, possible solutions for the winding, curing, and impregnation of highly curved cos $\theta$ coils are discussed.
16 November 2023 in IEEE Transactions on Applied Superconductivity
A new generation of superconducting magnets for applications in ion therapy is under study in the frame of a collaboration between CERN, Centro Nazionale di Adroterapia Oncologica (CNAO), Istituto Nazionale di Fisica Nucleare (INFN) and MedAustron. One of the most critical aspects of these new ion therapy facilities is the optimization of rotatable gantry to treat the patient from all the directions. Within this context, the INFN is taking part in the effort through the development of the Superconducting Ion Gantry (SIG) project. This program aims to design, manufacture and test a superconducting Nb-Ti, single aperture, cos-theta dipole, 80 mm in aperture, with a remarkable radius of curvature of 1.65 m. This magnet is critical for the design of a cutting-edge, weight optimized, 430 MeV/u carbon ion gantry. The project has the objective of proving the feasibility of such challenging magnets by winding and assembling a short demonstrator of 30 $^\circ$ angular sector and about 1.3 m in length, followed, possibly, by a full-length 45 $^\circ$ model. The magnet will be assembled and tested at the INFN Laboratorio Acceleratori e Superconduttività Applicata (LASA). In this contribution a preliminary 2D design of the mechanical structure is presented. The magnet features aluminum collars around the coils to convey the azimuthal preload, and a system of aluminum clamps to both hold the two halves of the iron yoke together, but also to convey the longitudinal preload, avoiding the usage of tie-rods.
22 March 2021 in IEEE Transactions on Applied Superconductivity
The design and construction of compact and lightweight gantries for hadron therapy are essential steps toward wider accessibility to this cancer treatment. The use of a high-field steady-state toroidal gantry, i.e., GaToroid, represents an attractive alternative to the state-of-the-art with the potential of significantly reducing size and weight of present installations. It is interesting to conceive the use of High-Temperature Superconductors (HTS) conductors to reach magnetic fields beyond 8 T at relatively high temperatures, decreasing the beam bending radius and, at the same time, avoiding complex cryogenics systems in the hospitals. The construction of such a machine requires several steps of prototyping and this manuscript presents the design of the first GaToroid single-coil demonstrator, wound with ReBCO conductors. The demonstrator is a scaled version of a full-scale GaToroid coil, with the conductors spaced into four planar windings, i.e., grades, and wound as a double pancake. Two operating regimes are foreseen to test the demonstrator at different temperatures, currents and magnetic fields. The cable geometry, composed of four ReBCO non-twisted tapes, was validated through 1D quench propagation studies in both regimes, and the hot spot temperature is well below 100 K. Furthermore, three-dimensional mechanical simulations allowed to estimate the stress state on the conductor, as well as to define the impregnation strategy of the demonstrator. The answers provided by the manufacturing, powering and test of the proposed demonstrator can provide valuable insights for the future construction of full-scale GaToroid coils.