18 March 2020 in IEEE Transactions on Vehicular Technology
It is a striking fact that the characteristics of parametric uncertainties, external disturbance, time-varying and nonlinearities are available in the constructed model of autonomous independent-drive vehicles; therefore, in this paper, the robust model predictive control (MPC) with the finite time horizon is proposed to realize the coordinated path tracking and direct yaw moment control (DYC) for autonomous four in-wheel motor independent-drive electric vehicles (AMIDEV). Firstly, considering the time-varying and uncertain feature of the tire cornering stiffness and the vehicle velocity in the state space equation constructed by 2 degrees of freedom (DoF) vehicle model and the path tracking preview model, the linear parameter varying (LPV) discrete model with four polytypic vertexes is constructed. Then, based on the linear matrix inequality (LMI) method, the novel robust MPC theory with the finite time horizon is put forward to solve the min-max optimization problem after updating four polytypic vertexes in real time, which could deal with the inevitable model mismatch problem caused by the time-varying, uncertain vehicle dynamic characteristics and external disturbance. Finally, the simulation and experimental results have verified that the proposed novel robust MPC theory could emerge from the stranglehold exercised by the conservativeness of the traditional robust MPC theory with the infinite time horizon, which strengthens the robustness of this control system as well as achieves better path tracking accuracy and handling ability of AMIDEV.
15 August 2019 in IEEE Transactions on Vehicular Technology
How to reasonably coordinate and control the torque of four wheels to enhance vehicle performance is an important research problem of the four in-wheel-motor independent-drive electric vehicle (4MIDEV). In this paper, a coordinated hierarchical control strategy for the dynamic wheel torque of 4MIDEV steering is proposed, which considers both safety and energy-saving performance. The innovation of this paper lies in two new valuable algorithms in the top and bottom level controller, respectively. Besides the optimal control method on the basis of the 2-degree of freedom (DoF) ideal model in the top level controller, a novel model predictive control method based on the 7-DoF dynamic model is put forward to obtain two virtual generalized forces required during vehicle driving. In the bottom level controller, a novel optimal allocation (OA) algorithm is brought forward to improve the safety and energy-saving performance. The tire stability margin and the electric power of driving system balancing the driving energy consumption and regenerative braking energy recovery are considered in the quadratic objective function of OA algorithm at the same time. Carsim-Simulink joint simulation results under open-loop and closed-loop steering conditions illustrate that, compared with the 2-DoF LQR control method, the 7-DoF MPC method could effectively improve vehicle handling stability and safety. The bottom optimal allocation algorithm can not only improve the vehicle handling stability, but also make the driving system more energy-saving.
28 November 2019 in IEEE Transactions on Industrial Electronics
This paper proposes a stochastic predictive energy management strategy (PEMS) based on fast rolling optimization for plug-in hybrid electric vehicles (PHEVs). Firstly, combined with a large number of real-world driving cycle data, the stochastic driving behaviors are modeled as probability transition matrices of vehicle demand torque based on Markov chains. Secondly, to solve the torque split problem in parallel hybrid powertrain, the SMPC framework is built. Thirdly, the continuation/generalized minimum residual (C/GMRES) algorithm is employed to execute the fast rolling optimization. The effectiveness of the proposed strategy is validated in both simulations and test bench, and its performance is compared with the SMPC by dynamic programming (DP) optimization and the equivalent minimum fuel consumption strategy (ECMS). Simulation results show that under real-world driving cycle, PHEV using the proposed strategy could obtain 4.8% energy consumption reduction comparing with that uses ECMS. In terms of computational time, the proposed strategy dramatically reduces the running time comparing with that of SMPC by DP optimization. Furthermore, the similar results can be obtained in the experiment. Under real-world driving cycle, 4.6% fuel economy improvement is obtained using the proposed strategy compared with that using ECMS, which clearly shows that the proposed strategy is effective.
14 February 2018 in IEEE Transactions on Vehicular Technology
To improve the structure configuration flexibility and overall performance of the X-by-wire ground vehicle, the control configured vehicle (CCV) concept is implemented on an X-by-wire electric vehicle in this paper. By including the control system design in parallel with mechanical system design for final configuration, the CCV improves the structure configuration flexibility of the X-by-wire ground vehicle significantly. Under CCV concept, the closed-looped stability of the vehicle lateral dynamics system is improved by the involved yaw control system. In this paper, a robust pole assignment yaw controller with the consideration of parametric uncertainties is used, which enables the designers to select the target zone of closed-looped poles to satisfy different requirements of performance. A full X-by-wire electric vehicle testbed is shown as example to demonstrate the benefit of CCV of improving the hardware configuration flexibility. Under CCV, all the X-by-wire components can be located flexibly to any position to improve the space saving, wires configuration and assembling convenience. The discussion of the yaw moment demand in different cases shows how the mechanical and control systems influence and benefit each other under CCV. In addition, the experiments based on the testbed show the performance and the efficiency of the proposed yaw controller.
11 January 2022 in IEEE Transactions on Transportation Electrification
Numerous missions in both civil and military fields involve the pursuit-evasion problem of vehicles. With vertical take-off and landing capability, the intelligent air–ground vehicle expands its feasible path to 3-D space, which has great advantages in the pursuit. This vehicle requires adequate path planning to obtain an optimal 3-D path and further improve the pursuit efficiency. The planning process of the air–ground vehicle currently faces the technical difficulties of acquiring the proper takeoff timing and position while optimizing the planning trajectory, especially in a complex environment with dense obstacles. To solve the above issues, a game-learning-based smooth path planning strategy for the intelligent air–ground vehicle considering mode switching is proposed in this article. First, a new reward function of the $Q$ -learning algorithm, considering the influence of flight obstacle crossing parameters, is presented to explore the short forward track distance. Second, in the update rule, the pursuit-evasion game acts in the mode switching decisions. During interactive learning between the vehicle and environment, this game constantly updates the Nash equilibrium solutions for mode switching and gets a series of switching decisions of the pursuer vehicle (ego vehicle). Third, a double-yaw correction for path smoothing modification is proposed to reduce turning points and avoid local path deviations. This modification provides heuristic information for the exploration of the environment, which significantly speeds up the convergence speed of the algorithm. Finally, the proposed strategy is verified on a 1000 m*1000 m map with 0–200 m obstacle height. Results show that this strategy is effective to decrease the 253-m distance compared with the traditional reinforcement learning algorithm and has a faster convergence speed. The number of trajectory direction changes is 36% less than that of the game-learning algorithm only considering mode switching. The unreasonable large angle turns are eliminated.