The effect of both CuO content (1 and 8 mol%) and calcination temperature (Tc = 500–1000°C) on light emitting and structural properties of ZrO2-Y2O3-CuO nanopowders was studied by photoluminescence (PL), X-ray diffraction (XRD) and Raman scattering methods. The samples, calcinated at Tc = 500–700°C, contain the tetragonal ZrO2 phase predominantly. The increase of Tc results in its transformation to monoclinic one, and the phase transformation happens at higher temperature at higher Cu content. It is shown that the increase of Tc from 500 to 800°C results in the Cu incorporation into nanocrystals from the surface entities. This manifests itself in the shift of XRD and Raman peaks of tetragonal phase. The PL spectra demonstrate the presence of two main PL components peaked at about 540 nm and 630 nm in the most samples. The increase of Tc from 500 to 1000°C results in the non-monotonic variation of total PL intensity as well as in minor changes in PL spectra shape. The evolution of PL intensity is explained by both the increase of a crystallinity degree and the variation of the concentration of non-radiative recombination centres. The transformation of PL spectra shape is ascribed to the appearance of radiative CuZr centres.
The crystal structure of micro- and nanopowders of ZnS doped with different impurities was analyzed by the electron paramagnetic resonance (EPR) of Mn2+ and XRD methods. The powders of ZnS:Cu, ZnS:Mn, ZnS:Co, and ZnS:Eu with the particle sizes of 5–7 μm, 50–200 nm, 7–10 μm, and 5–7 nm, respectively, were studied. Manganese was incorporated in the crystal lattice of all the samples as uncontrolled impurity or by doping. The Mn2+ ions were used as EPR structural probes. It is found that the ZnS:Cu has the cubic structure, the ZnS:Mn has the hexagonal structure with a rhombic distortion, the ZnS:Co is the mixture of the cubic and hexagonal phases in the ratio of 1:10, and the ZnS:Eu has the cubic structure and a distorted cubic structure with stacking defects in the ratio 3:1. The EPR technique is shown to be a powerful tool in the determination of the crystal structure for mixed-polytype ZnS powders and powders with small nanoparticles. It allows observation of the stacking defects, which is revealed in the XRD spectra.