8 January 2018 in ChemCatChem
Heterogeneous catalysts are desired for the conversion of glucose, the most abundant sugar in renewable biomass, but presently their synthesis requires highly toxic chemicals with long synthesis times. We report the conversion of glucose into fructose and 5‐hydroxymethylfurfural on a heterogeneous catalyst that is stable and selective and operates in the most environmentally benign solvent, water. We used a bifunctional solid with Lewis and Brønsted acid sites by partially replacing the organic linker of the zirconium organic framework UiO‐66 with 2‐monosulfo‐benzene‐1,4‐dicarboxylate. This catalyst showed high product selectivity (90 %) to 5‐hydroxymethylfurfural and fructose at 140 °C in water after a reaction time of 3 h. It was recyclable and showed only a minor loss in activity after the third recycle, offering a realistic solution for the bottleneck glucose isomerization reaction for scale‐up and industrial application of biomass utilization.
5 September 2019 in Chemical Communications
Yb6(BDC)7(OH)4(H2O)4 contains both bridging hydroxyls and metal-coordinated waters, possessing Brønsted and Lewis acid sites. The material crystallises from water at 200 °C. Using the solid as a heterogenous catalyst, glucose is converted into 5-hydroxymethylfurfural, via fructose, with a total selectivity of ∼70% after 24 hours at 140 °C in water alone: the material is recyclable with no loss of crystallinity.
9 June 2022 in Global Challenges
As electric vehicles become more widely used, there is a higher demand for lithium‐ion batteries (LIBs) and hence a greater incentive to find better ways to recycle these at their end‐of‐life (EOL). This work focuses on the process of reclamation and re‐use of cathode material from LIBs. Black mass containing mixed LiMn2O4 and Ni0.8Co0.15Al0.05O2 from a Nissan Leaf pouch cell are recovered via two different recycling routes, shredding or disassembly. The waste material stream purity is compared for both processes, less aluminium and copper impurities are present in the disassembled waste stream. The reclaimed black mass is further treated to reclaim the transition metals in a salt solution, Ni, Mn, Co ratios are adjusted in order to synthesize an upcycled cathode, LiNi0.6Mn0.2Co0.2O2 via a co‐precipitation method. The two reclamation processes (disassembly and shredding) are evaluated based on the purity of the reclaimed material, the performance of the remanufactured cell, and the energy required for the complete process. The electrochemical performance of recycled material is comparable to that of as‐manufactured cathode material, indicating no detrimental effect of purified recycled transition metal content. This research represents an important step toward scalable approaches to the recycling of EOL cathode material in LIBs.
1 November 2021 in Journal of Materials Chemistry A
Iridate pyrochlore oxides (Na,Ca)2−x(Ir2−yMy)O6·nH2O (M = Sb, Zr, Ru, Rh) are studied as electrocatalysts for the oxygen evolution reaction under acid conditions. The materials crystallise from aqueous solution under alkali hydrothermal conditions with 10–40 nm crystallite size. Refinement of their crystal structures using both powder neutron and X-ray diffraction determined the composition of the materials, and Ir LIII-edge XANES spectroscopy shows the average Ir oxidation state to be close to 4.5 in all materials, consistent with bond valence sums. All materials show high electrocatalytic activity for the oxygen evolution reaction and the electrocatalyst which best maintains activity on cycling is the sodium-free Ca2−xIr2O6·nH2O, while the (Na,Ca)2−xIr2O6·nH2O material shows highest activity when normalised for surface area. In membrane electrode assemblies, carbon corrosion is minimised, making the materials suitable for use in catalyst layers in proton exchange membrane devices, such as electrolysers and fuel cells. Under strongly acidic conditions it is proved that while A-site Ca and Na are readily leached, the average pyrochlore structure is maintained, as is electrocatalytic activity, with charge balance achieved by inclusion of protons in the pyrochlore structure in the form of bridging hydroxyls, as seen using inelastic neutron scattering spectroscopy.