We report Lg= 30 nm InAs-channel MOSFETs exhibiting 420 GHz fmax, record for a III-V MOSFET, and 357 GHz ft. The device incorporates a 5 nm strained InAs channel grown on an InP substrate. To reduce the parasitic gate-source and gate-drain capacitances, regrown lateral access regions increase the separations between the gate and the N+ source and drain; modulation doping within these access regions provides a low associated series resistance, enabling high gm. The 30 nm Lg device shows an 1.5 mS/ μm DC peak extrinsic gm at VDS = 0.5V and VGS = 0.3V, 91% of the value (1.65 mS/ μm) extracted from 10 MHz RF measurements, indicating a low DC-RF dispersion.
This letter presents a vertical integration scheme where track-and-hold circuits, consisting of a MOSFET in series with a metal-insulator-metal (MIM) capacitor, are successfully fabricated along vertical InAs nanowires. The nanowire MOSFET is used as a switch with varying switch resistance, R sw , as the gate-source voltage, V GS , is varied. The track-andhold circuit operation is verified by a sine wave that is properly evaluated by the circuit. In addition, calculations show that the three-dimensional integration reduces the track-and-hold area a factor of 2, as compared with planar MIM capacitor only. With further nanowire pitch reduction, about ten times area saving is projected.
Summary form only given. We report the development and characterisation of vertical wrap-gated InAs/high-k nanowire MOS capacitors. In this work, RF as well as low-frequency C-V characterization was performed for the first time, together with the development of a complete small signal equivalent circuit model. Based on the new technique, interface trap density D it , border trap density N bt , nanowire channel resistivity ρ nw , and quality factor of vertical wrap-gated nanowire MOS devices are evaluated simultaneously. Results highlight the advantages in using nanowire as a candidate for future electronics.