Sergii Semiriagin

Sergii Semiriagin

Auto-generated profile, based on publicly available information

Sergii Semiriagin

Physico-technological Institute of Metals and Alloys of the NAS of Ukraine (Kyiv, Ukraine)

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 January 2024 in Metallurgical Research & Technology
Verified
Journal Article
Closed access
PDF file
ASAleksey Smirnov
Aleksey Smirnov
VUVladimir Ukhin
Vladimir Ukhin
SSSergii Semiriagin
Sergii Semiriagin
Anastasiia SemenkoAnastasiia Semenko
Anastasiia Semenko
YSYuliia Skorobagatko
Yuliia Skorobagatko
The quality of continuously cast slabs largely depends on the processes taking place in the mold. In continuous casting of copper and its alloys the solidification process is almost completed within it. This paper presents a comprehensive optimization of the submerged entry nozzle design by combining physical and mathematical modeling with further comparison of obtained results with the actual process. The article studies the critical features of hydrodynamic processes in copper slab by physical and mathematical modeling during continuous casting. To ensure the efficiency of liquid pool homogenization, it seems appropriate to direct some metal upwards through openings in the SEN to the liquid meniscus. The optimal configuration of the SEN is the one where 35% of the liquid flows upwards to heat the melt meniscus and slab upper corner zones and 65% of liquid metal moves downward to the liquid pool bottom.

15 June 2024 in International Journal of Metalcasting
Verified
Journal Article
Closed access
PDF file
OSOleksiy Smirnov
Oleksiy Smirnov
VUVladimir Ukhin
Vladimir Ukhin
MGMaksym Goryuk
Maksym Goryuk
SSSergii Semiriagin
Sergii Semiriagin
VYVeronika Yefimova
Veronika Yefimova
Anastasiia SemenkoAnastasiia Semenko
Anastasiia Semenko

1 January 2023 in Metal and Casting of Ukraine
Verified
Journal Article
Open access
PDF file
OSO.M. Smirnov
O.M. Smirnov
VUV.Ye. Ukhin
V.Ye. Ukhin
SSS.V. Semiriagin
S.V. Semiriagin
Anastasiia SemenkoAnastasiia Semenko
Anastasiia Semenko
VOV.V. Osypenko
V.V. Osypenko
DRD.V. Ryabiy
D.V. Ryabiy
Проведено експериментальні серії розливання сталі для визначення впливу методу безперервного розливання на частоту формування дефектів сортової заготовки. При цьому виробництво квадратних заготовок перетином 125х125 мм здійснювалось на шестиструмковій сортовій машині безперервного лиття заготовок (МБЛЗ) зі швидкостями розливання 2,8-4,3 м/хв. У процесі дослідження спочатку була розлита серія з 5 плавок сталі 60 (Ст60) відкритим струменем. Після цього, з використанням тих же гільз кристалізаторів, послідовно розливали закритим струменем 5 плавок сталі 40Х. Шляхом промислового експерименту було визначено, що в результаті безперервного розливання сталі відкритим струменем кількість ромбічності сортової заготовки становить 4,5 %. Зокрема, у випадку застосування технології розливання металу закритим струменем дефектів геометричної форми заготовок не виявлено. Використання системи «стопор-моноблок» — «стакан-дозатор» — «занурений стакан» дозволяє більш точно й вчасно регулювати витрату металу під час розливання в автоматичному режимі, не змінюючи швидкість витягування заготовки. При цьому забезпечується збереження рівня металевого розплаву в кристалізаторі, що найбільш точно враховує особливості формування скоринки заготовки по всій довжині гільзи при поточній швидкості лиття. Відсутність необхідності регулювання швидкості розливання рівнем металу в промківші дозволяє підтримувати в ньому оптимальну кількість розплаву, що стабілізує температуру розливання. Підведення струменя сталі за допомогою зануреного стакана під рівень металу в кристалізаторі запобігає бурлінню на межі розподілу фаз, а можливість істотного збільшення внутрішнього діаметра стакана-дозатора (у порівнянні з вільним витіканням) у кілька разів знижує швидкість його заростання відкладеннями корунду. Крім цього, розливання закритим струменем дозволяє застосовувати спеціальні шлакоутворюючі суміші, які забезпечують покращення якості поверхні заготовки. Додатково підвищити якість безперервнолитих зливків можливо за рахунок застосування електромагнітного перемішування рідкої сталі.

1 March 2022 in Casting Processes
Verified
Journal Article
Open access
PUPhysico-Technological Institute of Metals and Alloys of the NAS of Ukraine
Physico-Technological Institute of Metals and Alloys of the NAS of Ukraine
OSO. Smirnov
O. Smirnov
VOV. Osypenko
V. Osypenko
CECeo
Ceo
SSS. Semiryagin
S. Semiryagin
YSYu. Skorobagatko
Yu. Skorobagatko
Based on the global trends in the metallurgy, the features of the further development of technologies for the cast metal productions are predicted. At the same time, there is considered the constant tightening of requirements for energy and resource saving, environmental and work safety, with the simultaneous need to improve the quality of casting, widening the range of obtained alloys and products from them. Also, ensuring reliable operation and expanding the functional capabilities of “ladle – furnace” units has particular importance, since they provide the complex out-of-furnace processing of melts, including averaging on temperature and chemical composition (at alloying and modifying too), removal gases and non-metallic inclusions, etc. It is noted that for the successful implementation of the listed technological operations, “ladle – furnace” units are equipped with additional devices and systems for heating the melt, vacuuming, blowing with inert gas (argon) and electromagnetic stirring. A comparative analysis of different methods of liquid metal stirring (by gas blowing and under the action of an external alternating electromagnetic field) showed that electromagnetic stirring is more effective and appropriate, especially at manufacturing relatively small batches of high-quality and special alloys on metallurgical mini- mills. At that, the most common at metallurgical enterprises and among research developments are electromagnetic stirrers of travelling magnetic field.There are indicated that applications of such stirrers have certain limitations due to physical characteristics. It relates to the need (in most cases) to supply them with a low frequency, making changes to the design of operating metallurgical aggregates for installation of the stirrer, as well as with not always rational hydrodynamic modes of melt stirring.The requirements concerning the development and application of electromagnetic stirrers for “ladle – furnace” units were formulated. Such devices should be simpler in design and operation, ensuring their long-term reliable working at obtaining a wide range of high-quality alloys. Keywords: “ladle – furnace” unit, metallic melt, gas blowing, electromagnetic stirring.

1 June 2023 in Casting Processes
Verified
Journal Article
Closed access
OSO. Smirnov
O. Smirnov
PUPhysico-Technological Institute of Metals and Alloys of the NAS of Ukraine
Physico-Technological Institute of Metals and Alloys of the NAS of Ukraine
VOV. Osypenko
V. Osypenko
SSS. Semiryagin
S. Semiryagin
MGM. Goryuk
M. Goryuk
LDLtd Scientific And Manufacturing Enterprise Dneproenergostal
Ltd Scientific And Manufacturing Enterprise Dneproenergostal
Вивчено особливості зносу вогнетривкої футеровки агрегату «ківш-піч», який працює в умовах металургійного мінізаводу, при інтенсивному перемішуванні рідкого металу газовими середовищами та електромагнітним полем. Установлено, що найбільш стресовими ділянками, стійкість яких визначає тривалість міжремонтної експлуатації ковша, є зона шлакового пояса, днище, а також бічна стінка, поблизу якої розташовується електромагнітний перемішувач. Розроблено рекомендації з відновлення робочого шару футеровки, сформульовано вимоги щодо раціоналізації режимів перемішування розплаву. Теоретично досліджено вплив електромагнітного перемішування на перебіг процесів тепломасопереносу в рідкометалевій ванні металургійних агрегатів, зокрема на гомогенізацію сплаву в режимі вільної турбулентності при введенні добавок.Запропоновано для впровадження в металургійних технологіях виплавки та доведення сплавів новий електромагнітний перемішувач конструкції ФТІМС НАН України, в основу дії якого покладено вплив на розплав пульсуючого магнітного поля, силові лінії якого однаково інтенсивно поширюються в горизонтальній та вертикальній площинах. Показано, що конструкція розробленого перемішувача, його живлення від електромережі промислової частоти 50 Гц, характер дії створюваного поля забезпечують простоту його виготовлення та експлуатації і таким чином надають йому суттєві техніко-економічні й технологічні переваги порівняно з відомими перемішувачами біжучого магнітного поля при тих же параметрах електромагнітних систем. Спільні дослідження фахівців ФТІМС НАН України та ІЕД НАН України з використанням математичного моделювання і натурних досліджень на алюмінієвому розплаві показали можливість реалізації широкого спектру режимів перемішування як за інтенсивністю, так і за характером руху рідкометалевого середовища. Таким чином, застосування створеного електромагнітного перемішувача в агрегаті «ківш-піч» дозволить суттєво розширити можливості доведення рідких сплавів за хімічним складом і температурою, особливо в умовах малих металургійних виробництв. Список літератури

7 September 2026 in Casting Processes
Verified
Journal Article
Open access
PDF file
ESE.м. Siharov
E.м. Siharov
ОSО.м. Smirnov
О.м. Smirnov
SSS.V. Semiriagin
S.V. Semiriagin
АPА.а. Pokhvalitiy
А.а. Pokhvalitiy
DОD.V. Оrlov
D.V. Оrlov
YSYu.P. Skorobagatko
Yu.P. Skorobagatko
The work investigates the technology of obtaining high-silicon iron-carbon alloy of the ФС15л brand, intended for the manufacture of parts of chemical equipment operating in aggressive acidic environments. The choice of an alloy with a silicon content of 13–15% as a material for the production of tanks of rectification columns for drying sulfuric acid is justified due to its high corrosion resistance, ability to passivation and long service life. In the process of research, the preparation of charge materials, smelting and refining of the starting pig iron from sulfur by the method of magnesium treatment in an IST-016 induction furnace were carried out. Based on the refined pig iron, an iron-carbon melt with a silicon content within 13–15% was obtained, samples were taken for chemical and structural analysis, and the metal was poured into sand-clay molds. To prevent the formation of burn-in, non-stick powders based on powdered quartz were used. Shaped castings and plate samples were obtained for further metallographic, mechanical and corrosion studies. The features of the formation of the structure of high-silicon ferrosilicides, the influence of silicon on the corrosion resistance and technological properties of the alloy were considered. It was established that the silicon content at the level of 13–15% ensures the formation of a stable protective layer on the metal surface, which effectively prevents corrosion destruction in a concentrated sulfuric acid environment. It is shown that the use of alloys of the ФС15л type allows to significantly increase the durability and reliability of chemical equipment, reduce the costs of repair and maintenance and increase the service life of technological installations. The results obtained confirm the prospects of using high-silicon iron-carbon alloys for the manufacture of cast parts for sulfuric acid production and other branches of the chemical industry. У роботі досліджено технологію отримання висококремнистого залізовуглецевого сплаву марки ФС15л, призначеного для виготовлення деталей хімічного обладнання, що працює в умовах дії агресивних кислотних середовищ. Обґрунтовано вибір сплаву із вмістом кремнію 13–15 % як матеріалу для виробництва царг ректифікаційних колон сушіння сірчаної кислоти завдяки його високій корозійній стійкості, здатності до пасивації та тривалому терміну експлуатації. У процесі дослідження здійснено підготовку шихтових матеріалів, виплавку та рафінування вихідного чавуну від сірки методом обробки магнієм в індукційній печі ІСТ-016. На основі рафінованого чавуну одержано залізовуглецевий розплав із вмістом кремнію в межах 13–15 %, відібрано проби для хімічного та структурного аналізу, а також здійснено розливання металу в піщано-глинисті суміші. Для запобігання утворенню пригару використано протипригарні присипки на основі пиловидного кварцу. Було одержано фасонні відливки та пластинчасті зразки для проведення подальших металографічних, механічних і корозійних досліджень. Розглянуто особливості формування структури висококремнистих феросиліцидів, вплив кремнію на корозійну стійкість і технологічні властивості сплаву. Встановлено, що вміст кремнію на рівні 13–15 % забезпечує формування стійкого захисного шару на поверхні металу, який ефективно перешкоджає корозійному руйнуванню в середовищі концентрованої сірчаної кислоти. Показано, що застосування сплавів типу ФС15л дозволяє суттєво підвищити довговічність та надійність хімічного обладнання, знизити витрати на ремонт і технічне обслуговування та збільшити міжремонтний ресурс технологічних установок. Отримані результати підтверджують перспективність використання висококремнистих залізовуглецевих сплавів для виготовлення литих деталей сірчанокислотного виробництва та інших галузей хімічної промисловості.