25 November 2024 in Ocean Engineering
18 June 2025 in Journal of Fluids Engineering
This study investigates the impact of Reynolds-averaged Navier–Stokes (RANS) turbulence models on the accurate computational simulation of the aerodynamic performance of the Savonius wind turbine. Five different models, including the Spalart–Allmaras (SA), realizable k–ε (RKE), shear stress transport (SST) k–ω, generalized k–ω (GEKO), and transition SST (TSST) models, are considered. The insight analysis utilizes high-fidelity two-dimensional (2D) incompressible unsteady RANS simulations for the two-blade turbine type with two configurations, TB1 and TB2, under various working conditions. The evaluation is based on quantitatively comparing the numerical aerodynamic parameters with the available experimental data and a deep analysis of the flow mechanism-induced turbine. The numerical results, through the comparison with an inviscid simulation, indicate a high sensitivity of the computed torque and power coefficients to the viscous model. All turbulence models fail to accurately predict the turbine's aerodynamic parameters at low speeds, where the tip speed ratio (TSR) is below 0.4. The SA and k–ω based turbulence models are effective in reproducing turbine performance in the optimal regime, where the TSR ranges from approximately 0.5 to 0.8. Additionally, the RKE model provides satisfactory predictions compared to experimental data, extending its accuracy to the high-speed regime across all tested configurations. Finally, the RKE model is the recommended turbulence model for computational fluid dynamics (CFD) simulations of Savonius wind turbines.
24 March 2026 in Ocean Engineering
8 August 2026 in Ocean Engineering
11 March 2026 in Vietnam Journal of Mechanics
As part of the global transition to sustainable energy, wind power has emerged as a promising alternative, widely adopted in Vietnam and beyond. In recent years, the Savonius wind turbine, a vertical-axis design, has offered advantages such as omnidirectional wind capture and simple structure but suffers from low aerodynamic efficiency, limiting its broader application. Inspired by the principles of aerodynamic efficiency observed in modern high-speed aircraft, such as the F-22, F-117 and TU-160, this study explores blade modifications incorporating fuselage geometry features to enhance performance. A series of computational fluid dynamics (CFD) simulations were conducted to investigate the influence of these new blade designs on the turbine’s power coefficient (CP). The results indicate that the proposed modifications can enhance CP values by up to 13.3% compared to the conventional Savonius design, particularly at higher tip speed ratios (λ > 0.8). This improvement paves the way for the practical application of Savonius wind turbines in urban wind energy harvesting, where compact and efficient designs are essential.