29 June 2017 in IEEE Transactions on Electromagnetic Compatibility
A defected ground structure (DGS), working as common-mode noise filter, is developed for high-speed electronic circuits. However, due to deviations of parameters inevitably exiting in the process and materials, the performance of the filter may shift and deteriorate even if the design is optimized. Therefore, a robust design method is proposed by using design of experiment and Taguchi method. Recognizing the deviations as uncontrollable factors and categorizing the prevailing and nonprevailing design parameters in the study, the filtering performance of common-mode DGS filter is not only optimized effectively with a wider stop band of 7.926 GHz but also highly resistive to the variations of design parameters.
18 October 2023 in IEEE Transactions on Instrumentation and Measurement
This paper presents a new conductive carbon fiber reinforced polymer (CFRP) aircraft composite and its electromagnetic characterization for tackling the lightning direct effect and enhancing the electromagnetic shielding effectiveness (SE). The CFRP composite design is deliberated for ameliorating the electrical conductivity of composite. With the aid of equivalent medium modeling, the inherent electromagnetic properties of the composite have been investigated. The simulated results illustrate that the lightning strike protection (LSP) capability and the electromagnetic shielding behavior of the newly developed aircraft composite have been improved as compared to the original neat CFRP composite, and comparable to that with copper mesh as a protective layer on top. Moreover, an artificial lightning experiment has been carried out in accordance with SAE ARP5416 by mimicking the natural lightning strike attachment. The shielding effectiveness of the proposed composite prototype has also been measured by using electromagnetic waveguide transmission line method. The physical experiments have effectively validated the simulation results and demonstrated the feasibility of the proposed conductive CFRP composite on LSP and SE.
20 March 2018 in IEEE Microwave and Wireless Components Letters
The widely used analytical formula for the barrel-plate capacitance in the physics-based via circuit model involves an infinite summation, which requires a truncation during practical computations. Such a truncation is problem-dependent and prone to either underestimate the capacitance value or ruin the computation when truncating too late. This letter proposes a fast-convergent expression of the barrel-plate capacitance based on a convergence study of the original formula. The proposed expression comprises a well truncated and a closed-form part, whose computation is more efficient and free of truncation error. It is validated against quasi-static solutions and measurement.
27 January 2025 in IEEE Transactions on Electromagnetic Compatibility
This article introduces an innovative calibratable modeling approach to effectively capture intricate arc behavior in air electrostatic discharge (ESD). The proposed method incorporates a compact electric arc resistance model rooted in the Rompe–Weizel law, calibrating by a physics informed neural network (PINN). The systematic uncertainties in the air discharge behavior due to environmental factors and measurement procedure are succinctly and effectively quantified through introducing an equivalent arc length in the compact model. A dedicated electrostatic air discharge behavior library is developed by a reduced-order partial element equivalent circuit model for training the neural network. The PINN calibrates the arc model according to the measured discharge currents on a standard ESD calibration set. The fidelity of the calibrated compact electric arc model is verified by the simulation and measurement. The efficacy of the proposed approach is observed through a case study. This new environment-aware modeling method provides deeper insights into air discharge phenomena and proves its promising potential in characterizing noncontact electromagnetic discharge.