Weihao Lu

Weihao Lu

Auto-generated profile, based on publicly available information

Weihao Lu

School of Integrated Circuit, Southeast University, Nanjing, China

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 November 2024 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
YMYanfeng Ma
Yanfeng Ma
SLSheng Li
Sheng Li
MLMingfei Li
Mingfei Li
WLWeihao Lu
Weihao Lu
LWLixi Wang
Lixi Wang
WSWeifeng Sun
Weifeng Sun
This letter proposes a monolithically integrated bidirectional gate electrostatic discharge protection scheme for p-GaN power high-electron-mobility transistors (HEMTs), in which a dual-gate HEMT is designed as the discharging transistor. With this protection scheme, the forward/reverse transmission line pulsing failure current is enhanced from 0.156 A/0.08 A to 1.36 A/5.26 A, almost without sacrificing performances of the p-GaN power HEMT. Thanks to the bidirectional switching characteristics of the dual-gate device by sharing the drift region, only one discharging transistor is required in the scheme; as a result, the area of this protection scheme can be effectively saved by 40.8% compared to state-of-the-art scheme with the same protection capability.

12 April 2024 in IEEE Transactions on Device and Materials Reliability
Verified
Journal Article
Closed access
YMYanfeng Ma
Yanfeng Ma
SLSheng Li
Sheng Li
MLMengli Liu
Mengli Liu
WLWeihao Lu
Weihao Lu
MLMingfei Li
Mingfei Li
JSJiaxin Sun
Jiaxin Sun
This article proposes an aging reliability compact model with high accuracy to simulate trap effects after long-term aging in power Gallium Nitride (GaN) based high electron mobility transistors (HEMTs). Dynamic on-state resistance (Ron,dy) caused by trap effects is taken as an example to deliver the aging reliability modeling concepts and flows. Based on the mechanism of trap effects and accelerated-stress experiments, the variation model of electron mobility has been established, so that the degradation of Ron,dy after aging can be predicted. The structure of the advanced SPICE model for GaN HEMT (ASM-HEMT) is modified to integrate the mobility variation model into SPICE for convenient usage. In addition, the accuracy of the proposed model has been verified, and the RMSE value between measured data and simulated data under long-term high temperature reverse bias stress conditions is only 1.68%, thus the hazard of the power system caused by traps can be discovered and avoided in advance.

15 March 2022 in Journal of Computational Electronics
Verified
Journal Article
Closed access
PDF file
CZChi Zhang
Chi Zhang
BHBo Hou
Bo Hou
SLSheng Li
Sheng Li
WLWeihao Lu
Weihao Lu
JHJingwen Huang
Jingwen Huang
WSWeifeng Sun
Weifeng Sun

1 July 2026 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
YMYanfeng Ma
Yanfeng Ma
SLSheng Li
Sheng Li
SPSongwei Peng
Songwei Peng
FJFengxin Ji
Fengxin Ji
HYHao Yan
Hao Yan
WSWeifeng Sun
Weifeng Sun
This work presents an experimental comparative study on the performance of two types of p-GaN gate high electron mobility transistor (HEMT) technologies (p-GaN HEMT) to achieve high threshold voltage and large gate swing, including structural and circuit schemes. The results show that both approaches achieve the threshold voltage (Vth) of exceeding 3V and the gate breakdown voltage of over 20V, matching the same ease of use as Si and SiC devices. However, the two technologies exhibit significant differences in terms of reverse conduction, gate driver, and gate reliability. The structural scheme offers a simpler way of use and lower chip cost, but faces challenges in gate reliability. In contrast, the circuit scheme exhibits excellent gate reliability, with stable threshold performance and robust time-dependent gate breakdown characteristics, along with low reverse conduction losses. However, it incurs higher chip costs and requires an additional VDD pin, complicating pin-to-pin replacement. Notably, the reverse conduction voltage drop of the structural scheme is determined by its Vth (∼3V), whereas the drop of the circuit scheme depends on the Vth of the integrated intrinsic p-GaN HEMT (∼1.5V). This difference limits the applicability of structural design in certain scenarios. In addition, the potential application areas for both technologies are outlined to guide system-level design decisions.

30 June 2025 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
SLSheng Li
Sheng Li
YMYanfeng Ma
Yanfeng Ma
HYHao Yan
Hao Yan
MLMingfei Li
Mingfei Li
WLWeihao Lu
Weihao Lu
WSWeifeng Sun
Weifeng Sun
A novel self-enhanced unclamped-inductive-switching (UIS) behavior of high-voltage p-gallium nitride (GaN) gate high-electron-mobility transistor (HEMT) on sapphire substrate (GaN-on-sapphire HEMT) is first discovered and investigated. In addition to the traditional LC-like resonance behavior of GaN-on-Si HEMT, the UIS behavior of GaN-on-sapphire HEMT deviates significantly and exhibits temperature-dependent failure voltage, indicating that impact ionization may be induced by the high electric field (E-field) and dominates the failure phenomenon. Furthermore, Technology Computer-Aided Design (TCAD) simulations and output capacitance characterization are carried out, which collectively confirm this mechanism. As the inductive energy is dissipated by impact ionization current, the overvoltage of GaN-on-sapphire HEMT is 32.1% lower than the theoretical resonant voltage. Finally, the UIS robustness of GaN-on-sapphire HEMT is self-enhanced.

18 September 2025 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
SLSheng Li
Sheng Li
QWQinhan Wang
Qinhan Wang
WLWeihao Lu
Weihao Lu
LWLeke Wu
Leke Wu
YLYiheng Li
Yiheng Li
WSWeifeng Sun
Weifeng Sun
This letter reveals the in-depth failure mechanisms of Cascode gallium nitride devices under a single pulse short-circuit event through simulation-based analysis and experimental validations. Under precisely controlled short-circuit conditions, a unique “recovery” failure phenomenon is observed, which results in two main burned regions: first, the drain corner surrounded by gate fingers, and second, the drain pad connection metal. Thermal simulations identify the drain corner as the primary failure origin. The failure process is then revealed by an equivalent circuit model. The high electric fields induce thermal breakdown of the dielectric, creating a conductive path that increases total drain current. The burned area subsequently becomes highly resistive again, reducing drain current while maintaining significant leakage. Under high bus voltage, Joule heating ultimately triggers catastrophic device destruction. Furthermore, a Schmitt trigger-based detection method experimentally confirms the first burned area as the initiation site of the short-circuit failure.