1 July 2010 in Vakuum in Forschung und Praxis
1 January 2018 in Journal of Synchrotron Radiation
Blazed gratings are of dedicated interest for the monochromatization of synchrotron radiation when a high photon flux is required, such as, for example, in resonant inelastic X-ray scattering experiments or when the use of laminar gratings is excluded due to too high flux densities and expected damage, for example at free-electron laser beamlines. Their availability became a bottleneck since the decommissioning of the grating manufacture facility at Carl Zeiss in Oberkochen. To resolve this situation a new technological laboratory was established at the Helmholtz Zentrum Berlin, including instrumentation from Carl Zeiss. Besides the upgraded ZEISS equipment, an advanced grating production line has been developed, including a new ultra-precise ruling machine, ion etching technology as well as laser interference lithography. While the old ZEISS ruling machine GTM-6 allows ruling for a grating length up to 170 mm, the new GTM-24 will have the capacity for 600 mm (24 inch) gratings with groove densities between 50 lines mm−1 and 1200 lines mm−1. A new ion etching machine with a scanning radiofrequency excited ion beam (HF) source allows gratings to be etched into substrates of up to 500 mm length. For a final at-wavelength characterization, a new reflectometer at a new Optics beamline at the BESSY-II storage ring is under operation. This paper reports on the status of the grating fabrication, the measured quality of fabricated items by ex situ and in situ metrology, and future development goals.
20 May 2019 in Optical Engineering
Metal optics has attained increasing interest for satisfying the growing needs of high-performance components for short-wavelength optical systems. Aluminum is a widely used mirror construction material because of its low price, good machinability, and a detailed metallurgical knowledge. Technical aluminum alloy materials, such as AL6061, show an excellent shape stability, which is necessary for robust and durable optical devices.1,2 Optical aluminum surfaces for use in the infrared spectral range are usually fabricated by single-point diamond turning (SPDT).3 4. – 5 However, for short-wavelength applications in the visible (VIS) or even the ultraviolet (UV) range, the requirements on the optical surface quality increase. Apart from a high figure accuracy to allow for best imaging properties, very low surface roughness and waviness values need to be reached. Otherwise, scattering and diffraction losses decrease the optical device efficiency. For VIS and UV spectral range applications, root mean square (rms) roughness values of 1 nm and need to be targeted, respectively.6 However, by SPDT, a typical roughness of 2- to 3-nm rms is achievable.1,7,8 An additional issue is the periodic turning marks with a pitch of 1 to distance and up to a few ten nanometers in height. As a result, undesired diffraction effects appear in UV/VIS range applications.
8 July 2016 in Plasma Processes and Polymers
31 March 2020 in Optical Engineering
<!-- *** Custom HTML *** --> Ion beam finishing techniques are commonly used for improvement of surface error topography of optical devices. Optical aluminum surfaces after manufacturing by single-point diamond turning meet the requirements for applications in the infrared spectral range. However, optics used for applications in the short-wavelength visible and ultraviolet spectral range demand improved surface qualities. To overcome the limitations mainly caused by structural and compositional inhomogeneities of aluminum alloys, a reactive ion beam machining process using oxygen and nitrogen operating gas is applied. This technology enables direct surface machining while preserving the initial roughness up to a 1-μm etching depth using low-energy ion beams. Moreover, the use of oxygen allows us to smooth the surface in the microroughness regime. Based on Monte-Carlo simulations and roughness evolution measured by atomic force microscopy, a more detailed discussion of the ion beam process is presented. Hence, a model scheme for direct smoothing of high-frequency surface features is suggested.
29 June 2020 in Plasma Chemistry and Plasma Processing
Ultrahigh-precision machining of glass is indispensable for optical component fabrication and therefore for applications. In this regard, plasma jet assisted chemical etching technologies enable new fabrication processes for enhanced optical functionalities due to their deterministic localized machining capabilities. This technique has been successfully applied to fused silica and silicon. However, applications require specific glass properties are related to complex material compositions of the glass. Hence, reactive plasma etching of these optical glasses is a challenging task. For instance, etching of metal oxide containing glass like N-BK7 by a fluorine-based reactive atmospheric plasma jet (RAPJ) exhibits currently limitations due to the formation of non-volatile reaction products that remain on the glass surface as a layer. Therefore, a procedure consisting of RAPJ etching and laser ablation is proposed for the machining of N-BK7. The capability of laser-based removal of residual layers is compared to water-based solving of the residual layer. After RAPJ etching of N-BK7 using a CF4–O2 gas mixture with an average microwave power of 16 W, the samples are cleaned either by a water-based solvent or by the ablation with a nanosecond-pulsed ultraviolet laser. The laser irradiation with fluences of 2.8 J/cm2 results in a localized removal of the residual layer. It is demonstrated that the roughness of the laser-cleaned N-BK7 surface is similarly low as solvent-based cleaned samples but the pulsed laser enhanced cleaning allows a dry processing at atmospheric pressure as well as a localized processing with a high lateral resolution.