Multifunctional capability, flexible design, rugged lightweight construction and self-powered operation are desired attributes for electronics that directly interface with the human body or with advanced robotic systems. For these applications, piezoelectric materials, in forms that offer the ability to bend and stretch, are attractive for pressure/force sensors and mechanical energy harvesters. Here, we introduce a large area, flexible piezoelectric material that consists of sheets of electrospun fibres of the polymer poly[(vinylidenefluoride-co-trifluoroethylene]. The flow and mechanical conditions associated with the spinning process yield free-standing, three-dimensional architectures of aligned arrangements of such fibres, in which the polymer chains adopt strongly preferential orientations. The resulting material offers exceptional piezoelectric characteristics, to enable ultra-high sensitivity for measuring pressure, even at exceptionally small values (0.1 Pa). Quantitative analysis provides detailed insights into the pressure sensing mechanisms, and establishes engineering design rules. Potential applications range from self-powered micro-mechanical elements, to self-balancing robots and sensitive impact detectors.
8 January 2013 in Macromolecular Materials and Engineering
We report on the wettability properties of silicon surfaces, simultaneously structured on the micrometre-scale and the nanometre-scale by femtosecond (fs) laser irradiation to render silicon hydrophobic. By varying the laser fluence, it was possible to control the wetting properties of a silicon surface through a systematic and reproducible variation of the surface roughness. In particular, the silicon–water contact angle could be increased from 66° to more than 130°. Such behaviour is described by incomplete liquid penetration within the silicon features, still leaving partially trapped air inside. We also show how controllable design and tailoring of the surface microstructures by wettability gradients can drive the motion of the drop’s centre of mass towards a desired direction (even upwards).
The combination of materials with targeted optical properties and of complex, 3D architectures, which can be nowadays obtained by additive manufacturing, opens unprecedented opportunities for developing new integrated systems in photonics and optoelectronics. The recent progress in additive technologies for processing optical materials is here presented, with emphasis on accessible geometries, achievable spatial resolution, and requirements for printable optical materials. Relevant examples of photonic and optoelectronic devices fabricated by 3D printing are shown, which include light‐emitting diodes, lasers, waveguides, optical sensors, photonic crystals and metamaterials, and micro‐optical components. The potential of additive manufacturing applied to photonics and optoelectronics is enormous, and the field is still in its infancy. Future directions for research include the development of fully printable optical and architected materials, of effective and versatile platforms for multimaterial processing, and of high‐throughput 3D printing technologies that can concomitantly reach high resolution and large working volumes.