25 August 2021 in IEEE Access
The soft-switching technology is widely used in DC-DC converters, DC-AC inverters, and AC-DC rectifiers. Soft-switching non-isolated DC/DC converters (Buck, Boost, and Buck-Boost) are the most active research area of the soft-switching technology, and fruitful results are achieved. However, there is currently no comprehensive review for the soft-switching technology of non-isolated DC/DC converters. This paper introduces soft-switching topologies for non-isolated DC/DC converters, and presents classification and characteristic of all kinds of soft-switching technologies. Some soft-switching technologies of derivative converters (non-inverting Buck-Boost converters and multiphase converters) are also presented. Finally future trends and generalized constitution methods of the soft-switching topology for non-isolated DC/DC converters are concluded. The soft-switching theory and constitution methods summarized in this article are expected to be able to guide the proposing of new soft-switching technologies for DC-DC converters.
24 June 2019 in IEEE Robotics and Automation Letters
Geometrical information of the 3D weld pool surface provides clues to determine the penetration state whose monitoring and feedback control are crucial for critical applications involving high temperatures and pressures. In this paper, a biprism stereo vision system is established to sense the weld pool surface under different penetration states during pulsed gas metal arc welding (GMAW-P) with V groove joint. Only one optical filter is used to block out the arc and capture a clear image of the weld pool during the base current period in GMAW-P. While most of the weld pool surface is textureless, there are a few features such as slags that are detectable. Hence, during the stereo matching sparse feature corners are detected and credibly matched in pairs, followed by a disparity region growing step to produce a semi-dense and unambiguous disparity map. Polynomial interpolation is applied to obtain sub-pixel disparity for every matched pixel. Finally, the point cloud and triangle mesh representation of the weld pool surfaces with different penetration states, partial, full, and over penetration, are presented. The experimental results verified the effectiveness of the proposed biprism stereo vision method in monitoring the weld penetration state.
14 September 2017 in High Temperature Materials and Processes
The tunnel defect formed in friction stir weld would dramatically push the mechanical properties of joints into deterioration. In this study, friction stir welding process was adopted to repair the joints of 7N01 aluminum alloy with tunnel defect. The effects of friction stir repair welding process on the microstructure and mechanical properties were comprehensively investigated. Microstructure of the repaired joints shows that the grain size in nugget zone decreases slightly while the recrystallization in the retreating side of thermo-mechanically affected zone is intensified as the joints are repaired. The microhardness of the repaired joints declined slightly compared with the defective joint. However, the yield strength and tensile strength increase and recover to the values of the joints free of defect. The longitudinal residual stress in weld zone increased remarkably as the repair times increase. Compared with the once repaired joint, yield strength and tensile strength of the twice repaired joint reduced slightly, and the throat thickness also reduced during the repeated repair welding process. Therefore, the times of repair welding applied should be limited actually.
13 March 2023 in IEEE Transactions on Circuits and Systems II: Express Briefs
This brief presented a new soft-switching auxiliary circuit for the three-level buck converter with synchronous rectification (TLBC-SR). The new zero voltage switching (ZVS) auxiliary circuit only employs one inductor and one capacitor, and has the features as full soft-switching conditions, high efficiency, low output current ripples, and simple modulation control method. The detailed operation principle and soft-switching design method are also given. Finally, an experimental prototype is built to verify the proposed ZVS TLBC-SR. The experimental results show that all switches operate under zero voltage switching (ZVS) conditions, and the peak efficiency of the prototype is up to 96.85%@100kHz.
19 October 2021 in Journal of Electrical Engineering & Technology
1 April 2026 in IEEE Transactions on Industrial Electronics
This article proposes a novel zero current switching (ZCS) soft-switching quadratic three-level boost converter with passive snubber circuit. The proposed converter is consist of the quadratic circuit of three-level boost converter and a ZCS circuit with three advantages: the ZCS soft-switching auxiliary circuit improves the efficiency of the converter; the quadratic structure improves the voltage gain; the three-level structure reduces the voltage stress. This article presents the principle of operation, voltage stress, power loss and soft-switching conditions. Finally, a 450 W experimental prototype was built and tested. The experimental results show that the main switches of this proposed converter can obtain ZCS condition in the whole output power range, and the peak efficiency reaches 97%.