30 September 2022 in IEEE Transactions on Intelligent Transportation Systems
OpenStreetMaps (OSM) is currently studied as the environment representation for autonomous navigation. It provides advantages such as global consistency, a heavy-less map construction process, and a wide variety of road information publicly available. However, the location of this information is usually not very accurate locally. In this paper, we present a complete autonomous navigation pipeline using OSM information as environment representation for global planning. To avoid the flaw of local low-accuracy, we offer the novel LiDAR-based Naive-Valley-Path (NVP) method that exploits the concept of “valley” areas to infer the local path always furthest from obstacles. This behavior allows navigation always through the center of trafficable areas following the road’s shape independently of OSM error. Furthermore, NVP is a naive method that is highly sample-time-efficient. This time efficiency also enables obstacle avoidance, even for dynamic objects. We demonstrate the system’s robustness in our research platform BLUE, driving autonomously across the University of Alicante Scientific Park for more than 20 km with 0.24 meters of average error against the road’s center with a 19.8 ms of average sample time. Our vehicle avoids static obstacles in the road and even dynamic ones, such as vehicles and pedestrians.
31 January 2024 in IEEE Robotics and Automation Letters
The photovoltaic (PV) industry is seeing a significant shift toward large-scale solar plants, where traditional inspection methods have proven to be time-consuming and costly. Currently, the predominant approach to PV inspection using unmanned aerial vehicles (UAVs) is based on the capture and detailed analysis of aerial images (photogrammetry). However, the photogrammetry approach presents limitations, such as an increased amount of useless data and potential issues related to image resolution that negatively impact the detection process during high-altitude flights. In this work, we develop a visual servoing control system with dynamic compensation using nonlinear model predictive control (NMPC) applied to a UAV. This system is capable of accurately tracking the middle of the underlying PV array at various frontal velocities and height constraints, ensuring the acquisition of detailed images during low-altitude flights. The visual servoing controller is based on extracting features using RGB-D images and employing a Kalman filter to estimate the edges of the PV arrays. Furthermore, this work demonstrates the proposal in both simulated and real-world environments using the commercial aerial vehicle (DJI Matrice 100), with the purpose of showcasing the results of the architecture. Our approach is available to the scientific community in: https://github.com/EPVelasco/VisualServoing_NMPC.
2 May 2024 in IEEE Robotics and Automation Letters
Feature-based geo-localization relies on associating features extracted from aerial imagery with those detected by the vehicle's sensors. This requires that the type of landmarks must be observable from both sources. This lack of variety of feature types generates poor representations that lead to outliers and deviations produced by ambiguities and lack of detections, respectively. To mitigate these drawbacks, in this letter, we present a dynamically weighted factor graph model for the vehicle's trajectory estimation. The weight adjustment in this implementation depends on information quantification in the detections performed using a LiDAR sensor. Also, a prior (GNSS-based) error estimation is included in the model. Then, when the representation becomes ambiguous or sparse, the weights are dynamically adjusted to rely on the corrected prior trajectory, mitigating outliers and deviations in this way. We compare our method against state-of-the-art geo-localization ones in a challenging and ambiguous environment, where we also cause detection losses. We demonstrate mitigation of the mentioned drawbacks where the other methods fail.
22 April 2025 in Robotics and Autonomous Systems
8 May 2024 in IEEE Access
While Visual Servoing is deeply studied to perform simple maneuvers, the literature does not commonly address complex cases where the target is far out of the camera’s field of view (FOV) during the maneuver. For this reason, in this paper, we present ViKi-HyCo (Visual Servoing and Kinematic Hybrid-Controller). This approach generates the necessary maneuvers for the complex positioning of a non-holonomic mobile robot in outdoor environments. In this method, we use LiDAR-camera fusion to estimate objects bounding boxes using image and metrics modalities. With the multi-modality nature of our representation, we can automatically obtain a target for a visual servoing controller. At the same time, we also have a metric target, which allows us to hybridize with a kinematic controller. Given this hybridization, we can perform complex maneuvers even when the target is far away from the camera’s FOV. The proposed approach does not require an object-tracking algorithm and can be applied to any robotic positioning task where its kinematic model is known. ViKi-HyCo has an error of $\mathbf {0.0428\pm 0.0467}$ m in the X-axis and $\mathbf {0.0515\pm 0.0323}$ m in the Y-axis at the end of a complete positioning task.