8 February 2010 in Energy & Environmental Science
Renewable hydrogen produced using solar energy to split water is the energy fuel of the future. Accelerated innovation in both major domains of solar energy (photovoltaics and concentrated solar power) has resulted in the rapid fall of the solar electricity price, opening the route to a number of practical applications using solar H2. Referring to several examples as well as to new technologies, this article provides insight into a crucial technology for our common future.
1 January 2014 in Energy Procedia
The present work relates to the investigation of cobalt and manganese oxide based compositions as candidate materials for the storage of surplus energy, available in the form of heat, generated from high temperature concentrated solar power plants (e.g. solar tower, solar dish) via a two-step thermochemical cyclic redox process under air flow. Emphasis is given on the utilization of small structured monolithic bodies (flow-through pellets) made entirely from the two aforementioned oxides. As compared to the respective powders, and in addition to the natural advantage of substantially lower pressure drop that monolithic structures can offer, this study demonstrated that structured bodies can also improve redox kinetics to a measurable extent. Cobalt oxide was found to be superior to manganese oxide both from an estimated energy density and from a redox reactions kinetics point-of-view. Among the redox conditions studied, the optimum reduction-oxidation operating window for the former oxide was determined to be in the range of 1000-800°C, while for the latter material no clear conclusion was drawn with reduction reaching its maximum extent at 1000°C and oxidation occurring in the range of 500-650°C. In both cases, no significant degradation of redox performance was observed upon cyclic operation (up to 10 cycles), however manganese oxide showed notably slower oxidation kinetics
27 June 2012 in AIChE Journal
15 November 2007 in Granular Matter
1 May 2014 in Energy & Fuels
28 November 2018 in Emission Control Science and Technology
Car brakes appear to be a significant atmospheric pollutant source, with a contribution to total non-exhaust traffic-related PM10 emissions being estimated at approximately 55% in big cities and urban environments (Bukowiecki et al., 2009 ). Brake wear particle emissions of a minivan running on a chassis dynamometer were measured using a custom sampling system, positioned close to the braking system, under different initial speeds (30 km/h and 50 km/h), deceleration rates (0.5 m/s2, 1.5 m/s2, 2.5 m/s2), and ambient temperatures (0 °C, 15 °C and 25 °C). Braking from 50 km/h to full stop, results in 40–100% more particles compared to 30 km/h, depending on the deceleration rate. It was also found that only 9–50% of the total particles emitted, are released during the braking phase and therefore the most significant amount is released on the following acceleration phase. High brake pad temperature results in a bimodal distribution with the first peak being at 1 μm and the second falling at the nanometer scale at 200 nm. The ambient temperature appears to have a negligible effect on the particle generation.