1 December 2020 in Micro and Nanosystems
Background: Microfluidic channels have been widely applied in biomedicine and microelectronics. However, the manufacturing methods of microfluidic channel devices, such as photolithography, three-dimensional printing and Melt-electrospinning direct writing (MEDW), have the problem of high cost and complex process, which still can't reach a sub-micron scale stably. Method: To improve the resolution of microfluidic channels, we developed a simple and flexible method to fabricate polydimethylsiloxane (PDMS) submicrofluidic channels. It depends on the following steps: (1) Direct Writing Polyethylene oxide (PEO) nanofiber by Near-field Electrospinning (NFES). (2) Packaging the nanofiber with PDMS. (3) Obtaining the PDMS submicrofluidic channel by inverted mode of PEO nanofiber. Results: According to the result of the experiment, nanofiber can be stably prepared under the following conditions, the electrode-to-collector distance of 3.0 mm, the voltage of 1.7 KV, the collector moving speed of 80mm/s and the mixed solutions of ethanol and deionized water (1:1). Finally, the PDMS submicrofluidic channel was manufactured by NFES and PDMS molding technique, and the diameter of the channel was 0.84±0.08 μm. Conclusion: The result verified the rationality of that method. In addition, the method can be easily integrated with high resolution channels for various usages, such as microelectronics, micro electro mechanical systems, and biomedical.
1 January 2022 in Thermal Science
In this paper, flow characteristics of a two-phase loop thermosyphon under vertical reciprocating vibration are visually investigated with N-pentane as the working fluid. The tests are performed for a heating power range of 20 W to 40 W, the filling ratio of 30 % to 70%, and a 30 m•s-2, 35 Hz vertical reciprocating vibration. The effect of vertical vibration on flow characteristics of the two-phase loop thermosyphon is investigated by comparing the obtained results with those acquired in static, thereby providing a basis for explaining the heat transfer process of two-phase loop thermosyphon under vibration. The results indicate that vertical vibration promotes the rupture of a liquid plug and the transformation of the plug flow to annular flow or wavy flow. Furthermore, the vertical vibration does not change the distribution law of liquid flow velocity in the two-phase loop thermosyphon. However, it will reduce the overheating and flow velocity in the two-phase loop thermosyphon at the start-up. With an increase in the heating power, the influence of vertical vibration on liquid flow velocity is reduced due to continuous disturbance of the working medium in the two-phase loop thermosyphon.