Today's information systems have become large and complex because they must interact with each other via networks. This makes testing and assuring the dependability of systems much more difficult than ever before. DS-Bench Toolset has been developed to address this issue, and it includes D-Case Editor, DS-Bench, and D-Cloud. D-Case Editor is an assurance case editor. It makes a tool chain with DS-Bench and D-Cloud, and exploits the test results as evidences of the dependability of the system. DS-Bench manages dependability benchmarking tools and anomaly loads according to benchmarking scenarios. D-Cloud is a test environment for performing rapid system tests controlled by DS-Bench. It combines both a cluster of real machines for performance-accurate benchmarks and a cloud computing environment as a group of virtual machines for exhaustive function testing with a fault-injection facility. DS-Bench Toolset enables us to test systems satisfactorily and to explain the dependability of the systems to the stakeholders.
Real-time 30-second-refresh numerical weather prediction (NWP) was performed with exclusive use of 11,580 nodes (~7%) of supercomputer Fugaku during Tokyo Olympics and Paralympics in 2021. Total 75,248 forecasts were disseminated in the 1-month period mostly stably with time-to-solution less than 3 minutes for 30-minute forecast. Japan's Big Data Assimilation (BDA) project developed the novel NWP system for precise prediction of hazardous rains toward solving the global climate crisis. Compared with typical 1-hour-refresh systems, the BDA system offered two orders of magnitude increase in problem size and revealed the effectiveness of 30-second refresh for highly nonlinear, rapidly evolving convective rains. To achieve the required time-to-solution for real-time 30-second refresh with high accuracy, the core BDA software incorporated single precision and enhanced parallel I/O with properly selected configurations of 1000 ensemble members and 500-m-mesh weather model. The massively parallel, I/O intensive real-time BDA computation demonstrated a promising future direction.
This article proposes a pattern-based prefetching scheme with the support of adaptive cache management, at the flash translation layer of solid-state drives ( SSDs ). It works inside of SSDs and has features of OS dependence and uses transparency. Specifically, it first mines frequent block access patterns that reflect the correlation among the occurred I/O requests. Then, it compares the requests in the current time window with the identified patterns to direct prefetching data into the cache of SSDs. More importantly, to maximize the cache use efficiency, we build a mathematical model to adaptively determine the cache partition on the basis of I/O workload characteristics, for separately buffering the prefetched data and the written data. Experimental results show that our proposal can yield improvements on average read latency by 1.8 %– 36.5 % without noticeably increasing the write latency, in contrast to conventional SSD-inside prefetching schemes.
28 December 2005 in Japanese Journal of Applied Physics
The effect of W and W2C on the synthesis of multi-walled carbon nanotubes (MWCNTs) by hot-filament-assisted chemical vapor deposition (HFCVD) using Co particles as a catalyst was examined. W or W2C was vacuum-evaporated onto Co particles supported by zeolite and used as a catalyst in CNT synthesis. Methanol was used as a carbon source. Synthesis of CNTs was carried out at about 400°C. The density of the MWCNTs synthesized using only Co as a catalyst was the lowest, and was sequentially higher when using Co combined with W (Co + W) and Co combined with W2C (Co + W2C). The mechanism of the enhancement of CNT growth upon the addition of W or W2C was considered.
A direct communication facility, called DCFA, for a many-core based cluster, whose compute node consists of many-core units connected to the host via PCI Express with Infiniband, is designed and evaluated. Because a many-core unit is a device of the PCI Express bus, it is not capable of configuring and initializing the Infiniband HCA, according to the PCI Express specification. This means that the host has to assist memory transfer between many-core units, and thus extra communication overhead is incurred. In DCFA, the internal structures of the Infiniband HCA are distributed to both the memory space of the host and that of the many-core unit. After the host CPU configures and initializes the HCA, it obtains the addresses of both the HCA and the internal structures assigned by the host. Using the information given by the host and the internal structures assigned in the many-core memory area, the many-core unit may transfer data directly between other many-core units using the HCA without host assists. The implementation of DCFA is based on the Mellanox Infiniband HCA and Intel's Knights Ferry. Preliminary results show that, for large data transfer, the latency of DCFA delivers the same performance as that of host to host data transfer.
Multi-kernels leverage today's multi-core chips to run multiple operating system (OS) kernels, typically a Light Weight Kernel (LWK) and a Linux kernel, simultaneously. The LWK provides high performance and scalability, while the Linux kernel provides compatibility. Multi-kernels show the promise of being able to meet tomorrow's extreme-scale computing needs while providing strong isolation, yielding high performance and scalability needed by classical HPC applications. McKernel and mOS started as independent research initiatives to explore the above potential. Previous work described their design and architecture advantages. This paper deploys the two LWKs and presents results from running them on a 2,048-node system with Intel Xeon Phi processors (KNL) connected by Intel Omni-Path Fabric. We compare the performance of McKernel, mOS, and Linux. Although the two multi-kernel efforts approached the problem from different angles, the results show a median performance improvement of 9% with some applications as high as 280% validating the efficacy of the multi-kernel approach. We provide insight into the performance improvements and discuss the strengths of the two different multi-kernel approaches.