A high-aspect ratio flexible filament suspended in a viscous fluid is unstable to a symmetry-breaking whirling motion when axially rotated beyond a critical velocity. We present experiments of this behavior and uncover a rich diversity of plectoneme formation soon after the initial instability, including multiple plectonemes for especially long filaments. A physical model extending Timoshenko's theory of elastic instability is presented which captures the fundamental physics involved in the instability. Additionally, we consider the effects of an axial flow that acts to tension the filament and control the onset of whirling without adjusting the physical properties of the filament itself. Such a setup could be employed to selectively engineer plectoneme formation at specified locations and lengths, and in fibers with submicron diameters, potentially to create superelastic ropes and fabrics.
This study is aimed to investigate the bio-mimetic swimmer propulsion mechanism with the use of its internal muscle force. A simplified articulated model, with multiple rigid segments connected by the joints (imitating the muscle force), is adopted to represent the real swimmer body. To modeling the problem, a Computational Fluid Dynamics (CFD) method is coupled with the system dynamic equations. Some preliminary results obtained showed that the numerical methods developed are able to predict the self-propelled articulated multi-body system with multiple degrees of freedom.
Performing numerical simulations of a scaled-down experimental setup of a floating offshore wind turbine allows for a two-way validation between the two approaches. Furthermore, additional insight in the physical behavior of the system can be obtained by tuning numerical results on experimental measurements, and exploring the results. Numerical simulations of a 10MW floating offshore wind turbine model in a wave basin are performed at model scale using computational fluid dynamics. The performance-scaled turbine is designed to match the Froude-scaled thrust force in a Froude-scaled wind field. Initial results show a discrepancy in calculated turbine thrust and torque results compared with experimental results. Two main challenges are identified: (1) selecting a numerical approach appropriate for the low-Reynolds number flow, and (2) accurately modelling the environmental conditions in the basin. In this paper, a numerical sensitivity study is carried out by varying systematically the turbulence models and inflow conditions. A standard k − ε turbulence model is used, as well as a more extensive γ – Reθ turbulence transition model. Different inflow conditions are set up to model the turbulent jet wind field in the wave basin. It is found that the k-ε turbulence model is unsuitable to match the model test results, while satisfying results are obtained using the γ – Reθ model. Furthermore, it is seen that the turbulent jet inflow is represented well by both a vertical power law profile and a radial profile fitted to wind field measurements, while uniform and tabulated inflow conditions are a poor representation of the experimental conditions. It is concluded that effects from surface roughness, the Reynolds number, the inflow velocity and turbulence distribution must be included in the numerical evaluation.