Abdullah Shawier

Abdullah Shawier

Auto-generated profile, based on publicly available information

Abdullah Shawier

School of Electronic Engineering and Computer Science, Queen Mary University of London, London, U.K.

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 June 2023 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Open access
Alejandro G. YepesAlejandro G. Yepes
Alejandro G. Yepes
Wessam E. Abdel-AzimWessam E. Abdel-Azim
Wessam E. Abdel-Azim
ASAbdullah Shawier
Abdullah Shawier
Ayman Abdel-KhalikAyman Abdel-Khalik
Ayman Abdel-Khalik
MHMostafa S. Hamad
Mostafa S. Hamad
Jesus Doval-GandoyJesus Doval-Gandoy
Jesus Doval-Gandoy
Multiphase permanent-magnet synchronous machines (PMSMs) with nonsinusoidal back-electromotive force (back-EMF) offer high fault tolerance and torque density for electric vehicles. Most current-reference generation methods either minimize stator copper loss (SCL) or maximize achievable torque. Optimization of both goals is accomplished by full-torque-range minimum-loss (FRML) strategies, but so far just for sinusoidal back-EMF. Thus, FRML for nonsinusoidal back-EMF should be sought. Moreover, many methods are only suitable for healthy conditions or specific machines, harmonics, or open-phase-fault (OPF) scenarios. Additionally, the torque range may be extended by permitting torque ripple or (transiently) greater rms current, but this approach is not general nor FRML yet. This paper proposes online FRML current-reference generation for multiphase PMSMs with nonsinusoidal back-EMF: nonsinusoidal-back-EMF FRML (NSBE-FRML). When the torque reference is feasible, minimum SCL is attained while maximizing the achievable torque (i.e., FRML). For higher torque references, the instantaneous torque deviation is minimized, and the torque reference is saturated in consecutive samples limiting the torque ripple to a pre-specified threshold. Furthermore, the rms current is limited after transient overload by automatically decreasing the torque reference. The NSBE-FRML is suitable for any harmonics, healthy/OPF conditions, and multiphase PMSMs with negligible saliency ratio. Experiments are performed with a six-phase PMSM.

31 May 2021 in IEEE Access
Verified
Journal Article
Open access
ASAbdullah Shawier
Abdullah Shawier
AHAbdelrahman Habib
Abdelrahman Habib
Mohamed MamdouhMohamed Mamdouh
Mohamed Mamdouh
Ayman Abdel-KhalikAyman Abdel-Khalik
Ayman Abdel-Khalik
Khaled H. AhmedKhaled H. Ahmed
Khaled H. Ahmed
Asymmetrical six-phase (A6P) induction motor-based drives can be considered as a well-established employed technology in high-power safety-critical industry sectors. Of the different control techniques proposed for multiphase machines, model predictive control (MPC) has recently been favored thanks to its simplicity, rapid dynamic response, and flexibility to define new control objectives. One of the main operating challenges when employing MPC to A6P induction machine is the poor quality of the phase current waveform due to the relatively low impedance of the secondary xy subspace. Although different controller structures have been introduced in the available literature to mitigate this problem, most of the available proposals, if not affecting the dc-link voltage utilization, will likely add to the control complexity. From the stator winding layout perspective, this paper attempts to investigate the effect of different winding configurations of six-phase stators with isolated neutral arrangements on the performance of predictive current control (PCC). This study shows that the winding configuration affect the mapping of the 64 available voltage vectors to the αβ and xy subspaces, the induced current ripples, and the required weighting factor employed in PCC. The theoretical findings have experimentally been validated using a 1kW twelve-phase machine that can externally be reconnected to form any of the three available six-phase winding configurations.

13 February 2023 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
Alejandro G. YepesAlejandro G. Yepes
Alejandro G. Yepes
ASAbdullah Shawier
Abdullah Shawier
Wessam E. Abdel-AzimWessam E. Abdel-Azim
Wessam E. Abdel-Azim
Ayman Abdel-KhalikAyman Abdel-Khalik
Ayman Abdel-Khalik
SAShehab Ahmed
Shehab Ahmed
Jesus Doval-GandoyJesus Doval-Gandoy
Jesus Doval-Gandoy
This paper proposes a current-reference generation method including current harmonic injection (CHI) for enhancing the torque capability of multiphase induction machines (IMs) with negligible space-harmonic effects, which is useful, e.g., during transient overload in electric vehicles. The admissible torque is increased because the harmonics reduce the phase-current peaks, so that the instantaneous peak-current constraint of the drive, usually associated with the converter ratings, is respected. The harmonics are injected in the so-called x-y subspaces of the IM, which do not produce torque, so that no torque ripple is introduced. The optimum harmonics are found online for each load, making it possible to minimize the stator copper loss (SCL) per torque in the entire torque range, ensuring full-range minimum loss (FRML). The method is suitable for healthy operation or open-phase faults, and for multiphase machines of any phase number and with either symmetrical or asymmetrical windings. Compared with FRML methods without CHI, higher torque is achieved. Although some techniques were available for increasing the torque capability by CHI, FRML was not attained, laborious offline optimization was needed, or they were only suitable for specific drives or for healthy conditions, unlike the proposal. Experimental results with a symmetrical six-phase IM are provided.

8 February 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
AHAbdelrahman Habib
Abdelrahman Habib
ASAbdullah Shawier
Abdullah Shawier
MAMahmoud said Abdel-Majeed
Mahmoud said Abdel-Majeed
Ayman Abdel-KhalikAyman Abdel-Khalik
Ayman Abdel-Khalik
MHMostafa S. Hamad
Mostafa S. Hamad
SAShehab Ahmed
Shehab Ahmed
Integrated on-board battery charging (IOBC) constitutes one of the future trends and the potential state-of-the-art technologies proposed for high-power chargers of electric vehicles. Model predictive control has recently been favored in different applications due to its simplicity in defining new control objectives and the straightforward handling of nonlinear constraints. In this article, the predictive current control (PCC) is applied to a six-phase induction-machine-based IOBC with three different winding configurations. From the grid perspective, this article introduces the required winding connections that maximize the charging grid current. Under PCC, different stator phases are controlled to draw balanced three-phase grid currents through controlling the machine nontorque-producing xy current components while ensuring zero average/ripple torque production. This article also discusses the effect of winding configuration on the mapping of the 64 available voltage vectors to the αβ , xy , and 0+ 0− subspaces. The optimal subset voltage vectors of each configuration that achieve the highest possible dc-link utilization, zero torque production, minimum total harmonic distortion (THD), and unity power factor are then introduced. The feasibility to employ the concept of virtual voltage vectors to improve the current quality is also investigated. The three six-phase configurations are obtained from an externally reconfigured 1 kW 12-phase induction motor, which has been used to experimentally validate the theoretical findings.

7 September 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Alejandro G. YepesAlejandro G. Yepes
Alejandro G. Yepes
Wessam E. Abdel-AzimWessam E. Abdel-Azim
Wessam E. Abdel-Azim
ASAbdullah Shawier
Abdullah Shawier
MAMahmoud said Abdel-Majeed
Mahmoud said Abdel-Majeed
HCHang Seng Che
Hang Seng Che
Jesus Doval-GandoyJesus Doval-Gandoy
Jesus Doval-Gandoy
Multiphase drives exhibit remarkable advantages (e.g., fault tolerance) over three-phase ones. Six-phase drives are particularly attractive, given their moderate complexity and suitability for off-the-shelf three-phase converters. Regarding the stator winding arrangement, the symmetrical one offers superior postfault capabilities in most scenarios. On the other hand, resistance asymmetry in the stator phases or connections may arise due to different causes. The conventional full-range minimum-loss strategy (FRMLS) generates stator-current references under open-phase (infinite resistance) faults so that torque ripple is prevented while minimizing the losses for each torque ( $\boldsymbol{d}$ - $\boldsymbol{q}$ current) value and maximizing the torque range; however, this method is unsuitable for unequal resistances of finite value. This article proposes an FRMLS for setting the current references to reach these goals in symmetrical six-phase drives with any resistance asymmetry. The optimum references are found online depending on the resistances, without lookup tables. The phase currents are individually limited by an iterative algorithm, so that minimum stator copper loss (SCL) is achieved over the maximum admissible torque range. In this manner, unlike the conventional FRMLS, minimum SCL and maximum torque range are attained even for finite resistance imbalance. The currents in phases affected by high resistances are suitably reduced. Experimental results are provided.

23 June 2023 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
RTRawan A. Taha
Rawan A. Taha
Wessam E. Abdel-AzimWessam E. Abdel-Azim
Wessam E. Abdel-Azim
ASAbdullah Shawier
Abdullah Shawier
Mohamed MetwlyMohamed Metwly
Mohamed Metwly
Ayman Abdel-KhalikAyman Abdel-Khalik
Ayman Abdel-Khalik
SAShehab Ahmed
Shehab Ahmed
Integrated On-Board Battery Chargers (IOBCs) have shown promise as an elegant charging solution for electric vehicles in recent literature. Although the three-phase charging technique of IOBCs has extensively been discussed in the literature, single-phase charging is still a challenging research topic. The Predictive Current Control (PCC) approach has shown many benefits, including a straightforward algorithm, simple implementation, comparatively quick response, and appropriate performance, when compared to conventional control techniques. This paper investigates the impact of single-phase charging of a six-phase-based IOBC system with different winding configurations using PCC, which, up to the best authors’ knowledge, has not been conceived thus far. Under single-phase charging, the zero-sequence current component is utilized to ensure zero torque production during charging mode. Since the impedance of the zero subspace is highly affected by the employed winding design, the performance of PCC with different winding layouts of either induction machine (IM) or permanent magnet synchronous machine (PMSM) is investigated and compared. The proposed method is experimentally validated using a 1.1kW six-phase IM and a 2 kW 12-slot/10-pole PMSM. Finite Element analysis is also carried out to investigate the effect of single-phase charging mode on the induced radial forces and vibration level when PM machine is employed.