Li-Na Wang

Li-Na Wang

Auto-generated profile, based on publicly available information

Li-Na Wang

Beijing Institute of Spacecraft Environment Engineering, Beijing, China

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 March 2019 in Molecules
Verified
Journal Article
Open access
PDF file
YYYi Yang
Yi Yang
JCJing Cao
Jing Cao
NWNing Wei
Ning Wei
DMDonghui Meng
Donghui Meng
LWLina Wang
Lina Wang
NZNing Zhang
Ning Zhang
In this paper, the thermal properties of graphene oxide (GO) with vacancy defects were studied using a non-equilibrium molecular dynamics method. The results showed that the thermal conductivity of GO increases with the model length. A linear relationship of the inverse length and inverse thermal conductivity was observed. The thermal conductivity of GO decreased monotonically with an increase in the degree of oxidation. When the degree of oxidation was 10%, the thermal conductivity of GO decreased by ~90% and this was almost independent of chiral direction. The effect of vacancy defect on the thermal conductivity of GO was also considered. The size effect of thermal conductivity gradually decreases with increasing defect concentration. When the vacancy defect ratio was beyond 2%, the thermal conductivity did not show significant change with the degree of oxidation. The effect of vacancy defect on thermal conductivity is greater than that of oxide group concentration. Our results can provide effective guidance for the designed GO microstructures in thermal management and thermoelectric applications.

7 February 2020 in Nanomaterials
Verified
Journal Article
Open access
PDF file
YYYi Yang
Yi Yang
DZDan Zhong
Dan Zhong
Yilun LiuYilun Liu
Yilun Liu
DMDonghui Meng
Donghui Meng
LWLina Wang
Lina Wang
Yang KangYang Kang
Yang Kang
As a derivative material of graphene, graphene oxide films hold great promise in thermal management devices. Based on the theory of Fourier formula, we deduce the analytical formula of the thermal conductivity of graphene oxide films. The interlaminar thermal property of graphene oxide films is studied using molecular dynamics simulation. The effect of vacancy defect on the thermal conductance of the interface is considered. The interfacial heat transfer efficiency of graphene oxide films strengthens with the increasing ratio of the vacancy defect. Based on the theoretical model and simulation results, we put forward an optimization model of the graphene oxide film. The optimal structure has the minimum overlap length and the maximum thermal conductivity. An estimated optimal overlap length for the GO (graphene-oxide) films with degree of oxidation 10% and density of vacancy defect 2% is 0.33 μm. Our results can provide effective guidance to the rationally designed defective microstructures on engineering thermal transport processes.

11 February 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
LQLei Qi
Lei Qi
ZZZhoumo Zeng
Zhoumo Zeng
YZYu Zhang
Yu Zhang
LSLichen Sun
Lichen Sun
XRXiaobo Rui
Xiaobo Rui
GYGuixuan Yue
Guixuan Yue
Clashes between space debris and spacecraft in orbit may cause air leakages, which pose a substantial danger to the crew and the spacecraft. Lamb wave dispersion in spacecraft structures and the randomness of leak holes are the difficulties in leak location. To solve these problems, a frequency weighting matrix beamforming algorithm is proposed in this paper. The elastic Lamb waves that are caused by leakages are acquired by an ‘L’ shaped sensor array consisting of eight acoustic emission sensors. The angle of a leak can be obtained through the superposition of different time delays, and the intersection of two angles can be used to find the location of the leak. Traditional beamforming is improved by matching the wave speeds in different frequency bands and weightings according to the energy distribution. Narrowband filtering is used to delay overlay different signal speeds with different frequency bands via a dispersion curve. The weighting method is used to compensate the frequency band response of different leak holes. The detailed location algorithm process is introduced and verified by experiments. For 1.5 and 2 mm leak holes, location direction accuracies of 1.33° and 1.93° for one sensor array were obtained, respectively.

24 March 2022 in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
Verified
Journal Article
Closed access
HSHeng-Chao Sun
Heng-Chao Sun
YHYan-Yan Hao
Yan-Yan Hao
LWLi-Na Wang
Li-Na Wang
Leakage performance of rubber seal is a key factor of spacecraft system, which is required long life. But the degradation law of the rubber seal performance in long service period is limited to qualitative analysis for its macro contact performance, and the quantitative research of rubber seal leakage performance is rarely involved considering thermal oxygen aging effect. Therefore, the thermal oxygen aging mathematical model is firstly established to predict the life of rubber material by aging tests. Secondly, the finite element model (FEM) of rubber seal performance analysis considering thermal oxygen aging effect is built to obtain the degradation law of its macroscopic contact performance with the increase of service time. Thirdly, the micro-leakage model of rubber seal considering thermal oxygen aging effect is established based on the material surface microstructure, contact pressure, and contact width, and the leakage rate of rubber seal is calculated by the model. Finally, the micro-leakage model of rubber seal is modified based on the experimental results, so the calculation accuracy of leakage rate is improved.

18 July 2018 in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
Verified
Journal Article
Closed access
LWLi-Na Wang
Li-Na Wang
YWYong Wang
Yong Wang
HSHeng-Chao Sun
Heng-Chao Sun
RGRen Guohua
Ren Guohua
LSLi-Chen Sun
Li-Chen Sun
DMDong-Hui Meng
Dong-Hui Meng
The finger seal has an important influence on the performance of the aero-engine, and the effect of complex working states on the performance of the finger seal, which is located in the aero-engine, is also prominent. But so far, the finger seal performance under complex working states, which include the incline of the rotor, assembly condition, temperature effect, and impact effect, has not been investigated yet. Based on this, an equivalent dynamic model of finger seal is presented under complex working states, and the dynamic performance analysis of the finger seal is carried out by the model. The results show that the complex working states have larger influence on the finger seal performance. Meanwhile, an experimental research is carried out and the results are compared with the theoretical results. And then the validity of the equivalent dynamic model of the finger seal under complex working states is proved. The present work is conducive to improve the theoretical research system of finger seal, and promote the dynamic analysis technology to engineering application as well.

6 May 2022 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Verified
Journal Article
Closed access
HSHeng-Chao Sun
Heng-Chao Sun
YHYan-Yan Hao
Yan-Yan Hao
TSTao Song
Tao Song
LWLi-Na Wang
Li-Na Wang
For the manned International Space Station, the more stringent requirements of the leakage performance of the rubber seal, which is located in it, is presented. The leakage is caused by the small leakage paths between contact pairs of the rubber seal. Therefore, it is necessary that the micro-leakage performance analysis between interfaces of the rubber seal is carried out. Based on this, the finite element model (FEM) of macroscopic contact performance analysis of the rubber seal is established first, and the macroscopic contact pressure and contact width of the rubber seal are calculated by the model. Then, the micro-leak path model is constructed based on the contact width and surface micro-structure, and the cross-sectional area of the micro-leakage path is obtained, when the contact pressure is acted on the model. Therefore, the fluid flow states in the micro-leakage path are determined, and the flow conductance and the seal leakage rate of rubber seal are all calculated. Finally, the micro-leakage model of the rubber seal is modified to improve the theoretical calculation accuracy by the experiment.