25 August 2020 in IEEE/ASME Transactions on Mechatronics
This paper presents a magnetically levitated linear drive for precision engineering with integrated active gravity compensation. The gravity compensation combines permanent magnets with novel hybrid shape memory actuators. The magnetically levitated system uses a homopolar linear drive as well as nine reluctance actuators to levitate a passive armature with no mechanical connection between stator and armature. The mechanical design is based on geometrically decoupled horizontal and vertical guidance axes. A decoupled Cartesian control scheme is developed, which compensates for actuator and system non-linearities in order to achieve high bandwidths. The active gravity compensation adjusts the air gap between permanent magnets and armature to the required gravity com-pensation force. This helps to keep dissipated power and temperature increases in the magnetically levitated drive low (and thus system precision high). To avoid generation of particles in clean room applications, the actuators positioning the permanent magnets are solely based on solid state effects: Thermal shape memory alloys (SMA) actively generate motion, while passive magnetic shape memory (MSM) alloy elements realize a multi-stable behavior based on their internal twinning force. The resulting actuator is compact, energy efficient and abrasion-free. The implementation of the gravity compensation in the levitated linear drive is verified and the functionality of the system is demonstrated in experiments.
23 June 2020 in Physica Status Solidi (a)
Ferritic steel has the potential to act as a medium for magnetic storage of certain information, for example, to document the history of parts. The material is expected to play a role in supporting intelligent production processes and logistics routines for industrial internet applications. For writing and reading stable magnetic codes into steel, it is necessary to investigate and understand the corresponding requirements of the material. Both sensitively depend on characteristic microstructural details and related magnetic properties. They are either already present in the material or may be locally achieved in the code area by supplementary hardening methods.
16 May 2023 in Journal of Intelligent Material Systems and Structures
The phase transformation of thermal shape memory alloys (SMAs) can be described by surfaces in a temperature-stress-strain space. A novel experimental technique for the thermomechanical characterization of thin SMA wires allows to scan these surfaces with high resolution. Each experimental run uses a sequence of experimental conditions to traverse the phase transformation surfaces on a different path from “full martensite” to “full austenite” and vice versa. At all times, stress and strain are kept within the limits specified for the use of the SMA wire in actuators. The wire is heated externally through a silicon oil bath, which ensures a controlled and homogeneous temperature of the specimen. The experimental setup is designed to minimize the impact of the large oil temperature variations on measurement results. Experimental results are shown for both mechanical contraction and electrical resistance, each of which forms consistent surfaces for the phase transformation. Measurements for external heating in the oil bath are compared to electrical heating in air.
19 March 2026 in Journal of Intelligent Material Systems and Structures
Self-sensing is one of the key features of intelligent materials. Thermal Shape Memory Alloy (SMA) wires change their electrical resistance during phase transformation from martensite to austenite and vice versa. During cooling, the intermediate R-Phase may form, which has a significant impact on electrical resistance. SMA models incorporating all three phase fractions are required for the design and control of advanced SMA actuators. This paper investigates the feasibility of a three-phase SMA model that accurately captures both strain and resistance behavior. Based on experimental data from a commercial SmartFlex ® wire, the transformation processes between the three material phases are identified. The proposed model uses phase transformation surfaces to accurately represent stress-dependent changes in transformation characteristics. It is shown how parallel transformation processes that compete for one phase fraction can be modeled. A parameterization process is suggested that uses the measured mechanical contraction and electrical resistance at different stress levels as well as the measured transformation enthalpies of the SMA wire. Model data are compared with experimental results. It is analyzed up to which stress level the R-phase has an impact on electrical resistance, and what role it plays in today’s self-sensing schemes.
19 August 2026 in Sensors and Actuators A: Physical