Naeem Ahmad Tahir

Naeem Ahmad Tahir

Auto-generated profile, based on publicly available information

Naeem Ahmad Tahir

GSI Helmholtzzentrum für Schwerionenforschung Darmstadt, Darmstadt, Germany

Research Focus & Metrics

Academic Career Length

34Years (1993-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 December 2025 in The European Physical Journal C
Verified
Journal Article
Open access
MBM. Benedikt
M. Benedikt
FZF. Zimmermann
F. Zimmermann
BAB. Auchmann
B. Auchmann
WBW. Bartmann
W. Bartmann
JBJ. P. Burnet
J. P. Burnet
MZM. Zykova
M. Zykova
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools/reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. The content and structure of this report are guided by the scope and priorities defined in the mandate of the FCC Feasibility Study. It is therefore not intended to serve as an exhaustive review of the full physics potential of FCC. Several topics, already covered in earlier reports such as the FCC CDR, are not reiterated here or are addressed only briefly, in alignment with the study’s focus. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme.

1 July 2010 in New Journal of Physics
Verified
Journal Article
Open access
PDF file
NTN A Tahir
N A Tahir
TSTh Stöhlker
Th Stöhlker
ASA Shutov
A Shutov
ILI V Lomonosov
I V Lomonosov
VFV E Fortov
V E Fortov
WZW Zhan
W Zhan
Intense heavy ion beams offer a unique tool for generating samples of high energy density matter with extreme conditions of density and pressure that are believed to exist in the interiors of giant planets. An international accelerator facility named FAIR (Facility for Antiprotons and Ion Research) is being constructed at Darmstadt, which will be completed around the year 2015. It is expected that this accelerator facility will deliver a bunched uranium beam with an intensity of 5 × 10 11 ions per spill with a bunch length of 50-100 ns. An experiment named LAPLAS (Laboratory Planetary Sciences) has been proposed to achieve a low-entropy compression of a sample material like hydrogen or water (which are believed to be abundant in giant planets) that is imploded in a multi-layered target by the ion beam. Detailed numerical simulations have shown that using parameters of the heavy ion beam that will be available at FAIR, one can generate physical conditions that have been predicted to exist in the interior of giant planets. In the present paper, we report simulations of compression of 7 Author to whom any correspondence should be addressed.

7 April 2005 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
NTN. A. Tahir
N. A. Tahir
BGB. Goddard
B. Goddard
VKV. Kain
V. Kain
RSR. Schmidt
R. Schmidt
ASA. Shutov
A. Shutov
VFV. E. Fortov
V. E. Fortov
The large hadron collider (LHC) will allow for collision between two 7TeV∕c proton beams, each comprising 2808 bunches with 1.1×1011 protons per bunch, traveling in opposite direction. The bunch length is 0.5ns and two neighboring bunches are separated by 25ns so that the duration of the entire beam is about 89μs . The beam power profile in the transverse direction is a Gaussian with a standard deviation of 0.2mm . The energy stored in each beam is about 350MJ that is sufficient to melt 500kg of copper. In case of a failure in the machine protection systems, the entire beam could impact directly onto an accelerator equipment. A first estimate of the scale of damage resulting from such a failure has been assessed for a solid copper target hit by the beam by carrying out three-dimensional energy deposition calculations and two-dimensional numerical simulations of the hydrodynamic and thermodynamic response of the target. This work has shown that the penetration depth of the LHC protons will be between 10 and 40m in solid copper. These calculations show that material conditions obtained in the target are similar to those planned for beam impact at dedicated accelerators designed to study the physics of high-energy-density states of matter, for example, the Facility for Antiprotons and Ion Research at the Gesellschaft für Schwerionenforschung, Darmstadt [W. F. Henning, Nucl. Instrum Methods Phys. Res. B 214, 211 (2004)].

16 June 2008 in Laser and Particle Beams
Verified
Journal Article
Closed access
PDF file
NTN.A. Tahir
N.A. Tahir
VKV.V. Kim
V.V. Kim
AMA.V. Matvechev
A.V. Matvechev
AOA.V. Ostrik
A.V. Ostrik
ASA.V. Shutov
A.V. Shutov
DHD.H.H. Hoffmann
D.H.H. Hoffmann
Survival of the production target in successive experiments (with a repetition rate of 1 Hz) over an extended period of time is one of the key problems encountered in designing the Super-FRS (Superconducting Fragment Separator) at the future Facility forAntiprotons and Ion Research (FAIR). Because of the difficulties involved in construction of a liquid jet metal target, it is highly desirable to employ a solid production target at the Super-FRS. However, with the high beam intensities that will be available at the FAIR, the production target may be destroyed in a single experiment due to high specific energy deposition by the beam in the target material. The level of specific energy deposition can be reduced to an acceptable value by increasing the beam focal spot area. However, the spot size is limited by requirements of achieving good isotope resolution and sufficient transmission of the secondary beam through the system. The resolving power of the fragment separator is inversely proportional to the X-dimension of the focal spot whereas the transmission depends on Y-dimension only. It has been previously shown [Tahir et al., 2005c] that an elliptic focal spot with appropriate dimensions, will fulfill the above two conditions simultaneously and will also have a large enough area to reduce the specific energy deposition to an acceptable level for certain beam intensities of interest. In this paper we present numerical simulations of thermodynamic and hydrodynamic behavior of a solid graphite target that is irradiated by 1 GeV/u uranium beam in the intensity range of 1010 –1011 ions per bunch with a bunch length = 50 ns. These simulations have been carried out using a three-dimensional computer code, PIC3D, that includes elastic-plastic effects. This theoretical work has shown that up to a beam intensity of 1011 ions/bunch, one can employ a solid target while for higher intensities the target will be destroyed due to thermal stresses induced by the beam. It has also been found that a circular focal spot leads to minimum thermal stresses as it generates minimum pressure gradients compared to an elliptic focal spot, for the same specific energy deposition. Moreover, the stress level increases with an increase in the ellipticity of the focal spot. It is therefore recommended that one should use a circular focal spot for lower intensities provided that the criteria for isotope resolution and transmission are fulfilled.

26 August 2010 in Physical Review E
Verified
Journal Article
Closed access
PDF file
APA. R. Piriz
A. R. Piriz
GPGonzalo Rodríguez Prieto
Gonzalo Rodríguez Prieto
Iván M. DíazIván M. Díaz
Iván M. Díaz
JCJuan jose Lopez cela
Juan jose Lopez cela
NTN. A. Tahir
N. A. Tahir
Dynamic stabilization of incompressible and immiscible Newtonian fluids is studied by means of an approximate analytical model that considers the vertical vibration of the interface between the fluids. The force driving the vibration is modeled by periodic sequences of Dirac deltas. The model shows the roles played by surface tension and viscosity in determining the stability boundaries and the relevant similarity parameters are found. The results are compared with previous theoretical and experimental studies that used a sinusoidal vibration and they are found to present the same qualitative features provided a symmetric sequence of Dirac deltas is considered. Instead, important differences are observed when an asymmetric driving is used.

28 January 2010 in Contributions to Plasma Physics
Verified
Journal Article
Closed access
PDF file
DHD.H.H. Hoffmann
D.H.H. Hoffmann
NTN.A. Tahir
N.A. Tahir
SUS. Udrea
S. Udrea
ORO. Rosmej
O. Rosmej
CMC.V. Meister
C.V. Meister
MIMuhammad Imran
Muhammad Imran