1 April 2024 in Optics Express
Sapphire fiber Bragg gratings (FBGs) have demonstrated their efficacy in sensing at high-temperature harsh environments owing to their elevated melting point and outstanding stability. However, due to the extremely high volume of modes supported by the clad-less sapphire fiber, the demodulation capability of the reflected spectra is hindered due to their irregular and somewhat complicated shapes. Hence, a mode-stripping or scrambling step is typically employed beforehand, albeit at the expense of sensor robustness. Additionally, conventional interrogation of sapphire FBG sensors relies on an optical spectrum analyzer due to the high sensitivity provided by the spectrum analyzer, where the long data acquisition time restricts the system from detecting instantaneous temperature variations. In this study, we present a simple sensor configuration by directly butt-coupling the sapphire FBG multi-mode lead-out fiber to a single-mode lead-in fiber, and detect its reflected spectra via a low-cost, fast, and coarsely resolved (166 pm) spectrometer. We leverage machine learning to compensate for the under-sampling of the measured FBG spectra and achieve a temperature accuracy of 0.23 °C at a high data acquisition rate of 5 kHz (limited by the spectrometer). This represents a tenfold improvement in accuracy compared to conventional peak-searching and curve-fitting methods, as well as a significant enhancement in measurement speed that enables dynamic sensing. We further assess the robustness of our sensor by attaching one side of the sensor to a vibrator and still observe good performance (0.43 °C) even under strong shaking conditions. The introduced demodulation technology opens up opportunities for the broader use of sapphire FBG sensors in noisy and high-temperature harsh environments.
12 July 2022 in Optics Express
Stimulated Raman scattering is a particularly robust nonlinearity, occurring in virtually every material because its spectral linewidth and associated frequency shift do not typically depend on phases or directions (i.e. wavevectors) of the interacting light beams. In amorphous materials such as glass fibers, Raman bandwidths are large, enabling its use as a broadband gain element. This ubiquity makes it a versatile means for achieving optical amplification or realizing lasers over a large range of pulsewidths at user-defined colors. However, this ease of deploying the effect also presents itself as a stubborn source of noise in fiber-based quantum sources or parasitic emission in fiber lasers. Here, we show that orbital angular momentum carrying light beams experiencing spin-orbit interactions yield novel phase-matching criteria for Raman scattering. This enables tailoring its spectral shape (by over half the Raman shift in a given material) as well as strength (by ∼ 100×) simply by controlling light’s topological charge – a capability of utility across the multitude of applications where modulating Raman scattering is desired.
17 June 2025 in Optica Quantum
In the realm of quantum information processing, harnessing high-dimensional photonic systems provides a pathway to overcome limitations of traditional two-level systems. Orbital angular momentum (OAM) of light has emerged as a powerful tool for creating and manipulating high-dimensional entanglement, promising increased information capacity and enhanced security in quantum communication protocols. However, conventional methods like spontaneous parametric downconversion encounter challenges due to non-uniform production rates of Laguerre–Gaussian modes. This study explores the potential of spontaneous four-wave mixing in ring-core fibers (RCFs) as a viable platform for generating OAM photon pairs with tailored spectral and spatial properties. We show that by controlling the topological charge of pump photons, correlated, uncorrelated, and anti-correlated photon pairs can be engineered across arbitrary spectral ranges, essential for diverse quantum applications. Experimental noise characterization of the RCF-based source demonstrates a high coincidence-to-accidental ratio exceeding 4000, and a low heralded second-order correlation function (g
H
(2)<0.005), which confirms its operation well into the single-photon regime. This work demonstrates the potential of RCFs as a versatile platform for generating structured photon pairs, paving the way for future high-dimensional quantum communication and information processing applications.
1 November 2021 in Journal of the Optical Society of America B
We investigate frequency doubling of focused Bessel-like higher order fiber modes in a one-dimensionally quasi-phase matched structured KTP crystal. A single higher-order fiber mode, , was generated at 971 nm using a fiber optical parametric amplifier pumped by sub-nanosecond pulses at 1064 nm. Frequency doubling to 485.5 nm was achieved with a maximum conversion efficiency of 48%, which produced a highly structured blue beam without any brightness improvement with respect to the fundamental beam. By optimizing the phase mismatch, we also experimentally demonstrate clean on-axis conversion—resulting from cascaded processes, which is in good agreement with our numerical simulations, that give rise to brightness enhancement.
16 August 2024 in Optics Express
This study presents a proof-of-concept demonstration of a demodulation technique using a seven-core fiber (SCF) and machine learning (ML) algorithms for multimode fiber (MMF)-based tactile sensing. By condensing high-resolution images into vectors of seven power values from the cores of the MMF, dataset size is significantly reduced compared to conventional specklegram sensors, mitigating post-processing workload. This downsampling approach, akin to machine learning pooling layers, boosts computational efficiency without compromising accuracy. Leveraging power measurements from the seven cores along with a Gaussian process regression model, the proposed sensor achieves a spatial resolution of 0.075 mm (1 mm sampling) for detecting normal force distribution, outperforming conventional ML algorithms used in MMF specklegram sensors with 20 times less computation time. Moreover, the sensor design enables simultaneous measurement of contact force and position with over 96% accuracy. This study underscores the potential of SCF-based sensors to streamline data acquisition and storage while preserving signal quality, potentially eliminating the need for free-space coupling and cameras commonly used in MMF specklegram setups, thus paving the way for all-fiber-based, high-speed, cost-effective, multi-parameter tactile sensors.
17 June 2025 in IEEE Photonics Technology Letters
This study introduces a machine learning (ML)-assisted framework for optimizing Proportional-Integral-Derivative (PID) coefficients, enabling stable, long-length single crystal fiber (SCF) fabrication via the Laser Heated Pedestal Growth (LHPG) technique. Compared with traditional curve-fitting methods, the proposed ML approach significantly enhances computational efficiency and achieves up to 20dB improvement in prediction accuracy, leading to notable improvements in SCF uniformity and achievable fiber length. The fabricated sapphire SCF demonstrates a length exceeding 3 m and an average diameter of $150~\mu $ m with fluctuations below $\pm 3~\mu $ m, validating the effectiveness of the ML model. Additionally, fundamental guidelines for optimizing PID coefficients in LHPG systems are provided. These results offer valuable insights for high-quality SCF fabrication and are expected to facilitate the production of improved fibers suitable for harsh environment sensing applications.