Poornachandra Vaddy

Poornachandra Vaddy

Auto-generated profile, based on publicly available information

Poornachandra Vaddy

Department of Civil and Environmental Engineering, Michigan State University, East Lansing, MI

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 January 2022 in Construction and Building Materials
Verified
Journal Article
Closed access
PVPoornachandra Vaddy
Poornachandra Vaddy
VPVenkataraman Pandurangan
Venkataraman Pandurangan
KBKrishna Prapoorna Biligiri
Krishna Prapoorna Biligiri

1 July 2020 in Journal of Testing and Evaluation
Verified
Journal Article
Closed access
PVPoornachandra Vaddy
Poornachandra Vaddy
ASAvishreshth Singh
Avishreshth Singh
PSPrasanna Venkatesh Sampath
Prasanna Venkatesh Sampath
KBKrishna Prapoorna Biligiri
Krishna Prapoorna Biligiri
Embedded infiltration rings have been historically used to estimate the infiltration properties of pervious concrete (PC) pavements. However, no methodical study has evaluated the effect of the size of embedded rings on the infiltration characteristics of these special pavement systems. The objective of this research was to assess the infiltration rate of PC using a multi-scale, in situ approach through embedding rings of various sizes in pavement slabs. Essentially, this investigation attempted to identify the most appropriate size of the embedded ring that can estimate infiltration rates of PC slabs in a reliable manner. To meet the proposed objective, a multi-scale in situ experimental program was designed, in which five infiltration rings of inner diameter ranging from 100 to 580 mm were embedded into three PC slabs of dimensions 3 × 2.5 × 0.15 m. A surface infiltration test was also conducted on PC slabs and was found to vary from 0.36 to 1.87 cm/s. The embedded infiltration rate (EIR) was estimated using a falling head permeability test by ponding water above the pavement surface and measuring the time taken to drain. EIRs decreased from 1.36 to 0.27 cm/s with increasing ring diameter from 100 to 580 mm. Field tests also indicated that infiltration rates for smaller ring diameters (180 mm and lower) had higher uncertainty, which was attributed to the inability of achieving optimum compaction efforts inside of smaller rings. Based on the findings, the optimum size for estimating the infiltration rate of PC was found to be 270 mm. It is noteworthy that this diameter is in the range suggested by ASTM C1701, Standard Test Method for Infiltration Rate of In Place Pervious Concrete, i.e., 300 mm. This research helped identify the practicable specimen size that could be utilized by researchers and practitioners to estimate the most reliable field infiltration rates through PC.

20 November 2023 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
PVPoornachandra Vaddy
Poornachandra Vaddy
TITanzila Islam
Tanzila Islam
MKMohammed Emin Kutay
Mohammed Emin Kutay
MVMichael Vrtis
Michael Vrtis
Syed HaiderSyed Haider
Syed Haider
BCBora cetin
Bora cetin
Spray-on rejuvenation is a preventive maintenance strategy that highway agencies use to prolong the service life of asphalt pavements. This process involves applying rejuvenators on the surface of asphalt pavement to reverse the stiffening caused by aging. However, with several rejuvenators available on the market, it can be challenging to select specific products without understanding their effects at the mixture level. In this study, 12 different spray-on rejuvenators were applied on two different test sections (each with multiple test cells) at the Minnesota Road Research Facility. To assess the short-term (1–2 months) performance of rejuvenators, bending beam rheometer (BBR) test beams were prepared from the surface of the field-extracted cores, and a creep stiffness test was performed. The creep stiffness was measured at three different temperatures to evaluate the effectiveness of rejuvenators at these temperatures. The BBR test was not used to assess the low-temperature cracking resistance; instead, it was simply used to measure the beams’ linear viscoelastic property (i.e., the creep stiffness). Results indicated that the effect of rejuvenation is more evident at higher temperatures (20°C in this case). Besides, specific unexpected effects of rejuvenator products were observed. One of the test sections included extensive microcracks visible on the surface (presumably because of construction-related issues). Some of the rejuvenators closed these microcracks, leading to a “bridging” effect and increasing the stiffness of the BBR beams. This study provides a reference for evaluating the effect of spray-on treatments at the asphalt mixture level, which can assist roadway agencies in decision-making.

20 January 2024 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
SASeyed Farhad Abdollahi
Seyed Farhad Abdollahi
PVPoornachandra Vaddy
Poornachandra Vaddy
MKM. Emin Kutay
M. Emin Kutay
Construction, operation, and maintenance of a pavement network requires funding, partially sourced from road user taxes. Recent studies showed that lightweight vehicles are typically taxed higher compared with heavy trucks that damage the roads the most. To facilitate the equity and fairness of the allocated costs to different vehicles in the United States (U.S.), Highway Cost Allocation Studies (HCAS) were performed using various pavement performance prediction models. Reviewed literature showed the lack of mechanistic-empirical (ME)-based HCAS models for the flexible pavement network. In this study, a national-level ME-based HCAS model was developed, and the damage shares of different vehicle classes have been estimated for 67,583 pavement sections in the U.S. Highway Performance Monitoring System (HPMS) database. The proposed HCAS model was compared with the existing Federal Highway Administration (FHWA) HCAS model (i.e., National Pavement Cost Model [NAPCOM]). The analysis of the traffic data showed that two-axle single-unit trucks (SU2) and tractor-semitrailers with two tandem and one single axle (CS5T) were the most frequent users of the pavement network. The results showed that the damage share of SU2 is dominant in minor roadways, while the damage share of the heavier vehicles in the CS5T class is dominant in major arterials and interstates. In addition, it was found that, although the geographical location and environmental condition of the pavement section affects the magnitude of the pavement distresses, the distribution of the damage shares remains almost the same. This can be attributed to the similarities in the traffic data, for example, vehicle class distribution and axle load spectra.

18 September 2026 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
PVPoornachandra Vaddy
Poornachandra Vaddy
MKMuhammed Emin Kutay
Muhammed Emin Kutay
AHAhmed Hassanien
Ahmed Hassanien
MEMichael Elwardany
Michael Elwardany
RCRobert C. Custer
Robert C. Custer
Fatigue failure in asphalt concrete (AC) pavements is typically assessed using global degradation metrics such as stiffness reduction or stress-cycle (S × N) relationships. However, these conventional approaches overlook the localized and heterogeneous nature of damage evolution in AC mixtures. This study introduces a novel fatigue failure criterion based on the onset of localized strain relaxation, identified using a high-resolution, non-contact optical flow-based strain measurement system developed for the Asphalt Mixture Performance Tester (AMPT). The non-contact strain measurement system, referred to as MIMAQ (Michigan IMage AcQuisition), enables microstrain-level tracking across multiple gauge segments without the need for speckle patterns or external synchronization. Fatigue and uniaxial monotonic tensile tests were conducted on AC specimens using a multi–gauge length approach, allowing for spatial resolution of strain evolution. Results from uniaxial cracking tests confirmed that macrocrack initiation consistently aligned with the load–time inflection point, while fatigue tests demonstrated that strain relaxation in localized regions preceded conventional failure indicators by a factor of two to five. A complementary metric, macrocrack propagation time (MPT), was introduced to quantify the temporal spread of failure across the specimen. The proposed relaxation-based failure criterion offers earlier, and more mechanistically interpretable detection of fatigue failure compared with traditional methods. It also enables performance assessment at lower target strain levels, reducing test durations. The findings support the potential for incorporating spatially resolved strain data into fatigue modeling frameworks such as viscoelastic continuum damage (VECD) or finite element models, contributing to the development of more resilient and performance-driven pavement designs.

7 July 2026 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
AHAhmed Hassanien
Ahmed Hassanien
MEMichael Elwardany
Michael Elwardany
PVPoornachandra Vaddy
Poornachandra Vaddy
MKMuhammed Emin Kutay
Muhammed Emin Kutay
RCRobert Custer
Robert Custer
This study presents a patented collet–chuck-based clamping system for uniaxial cyclic fatigue testing of asphalt mixtures using small specimen geometry. Conventional specimen preparation is time- and resource-intensive, requiring precise cutting and the use of epoxy adhesives to mount specimens onto loading platens. These steps are critical for test success and typically require highly trained personnel, and they introduce delays because of epoxy curing. The proposed mechanical clamping system eliminates the need for cutting and epoxy adhesives, which allows rapid, repeatable specimen mounting, streamlining the workflow and reducing testing time. The system is compatible with a standard asphalt mixture performance tester and can be fabricated using commercially available, off-the-shelf components. To evaluate its applicability, eight asphalt mixtures from three different states were tested using the conventional glued-end-plate method and the collet–chuck clamping system. The mixtures covered a wide range of material characteristics, including different nominal maximum aggregate sizes (NMAS), binder types (unmodified, polymer-modified, and highly polymer-modified), binder contents, and reclaimed asphalt pavement percentages. The results showed strong agreement between both methods, with similar damage characteristic curves and comparable normalized variance index v norm values. The collet–chuck system produced improved v norm values in five of the eight mixtures. In addition, no statistically significant differences were observed in the failure criteria based on pseudo stiffness versus time curve, and apparent damage index parameter between the two systems, confirming that the proposed clamping approach is a viable alternative for uniaxial cyclic fatigue testing without compromising test integrity or results validity.