Yuhan Sun

Yuhan Sun

Auto-generated profile, based on publicly available information

Yuhan Sun

State Key Laboratory of ASIC and System, College of Integrated Circuits and Micro-Nano Electronics, Fudan University, Shanghai, China

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 January 2025 in IEEE Sensors Journal
Verified
Journal Article
Closed access
YSYuhan Sun
Yuhan Sun
KWKangyao Wen
Kangyao Wen
FDFangzhou Du
Fangzhou Du
CDChenkai Deng
Chenkai Deng
WLWenmao Li
Wenmao Li
HYHongyu Yu
Hongyu Yu
A novel AlGaN/GaN Schottky barrier diode (SBD) thermal sensor featuring a recessed anode and a thin Al0.25Ga0.75N barrier layer is fabricated, which is demonstrated to have ultralow power, excellent linearity and high sensitivity for thermal sensing. The AlGaN layer thickness is employed to trade off the tunneling current proportion against the two dimensional electron gas (2DEG) density for the thermionic emission (TE) dominated electron transportation with better linearity and high sensitivity of thermal sensing at ultralow power. A sensitivity of 1.39 mV/K with a linearity of 0.995 operating at 0.082 - 0.324 V for a constant current of 10-7 A is revealed. The proposed SBD sensor shows the great potential application for on-chip, low power, and high performance thermal sensing in monolithic AlGaN/GaN heterostructure based power ICs.

4 September 2025 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
YSYuhan Sun
Yuhan Sun
KWKangyao Wen
Kangyao Wen
WLWenmao Li
Wenmao Li
CDChenkai Deng
Chenkai Deng
YCYifan Cui
Yifan Cui
HYHong-Yu Yu
Hong-Yu Yu
A novel discrete GaN/AlGaN/GaN heterostructure-based Schottky barrier diode (SBD) thermal sensor is proposed, demonstrating a very high thermal sensitivity of 13.3 mV/K with a linearity of 0.992 at 10-5 A for 45 nm GaN cap over a temperature range of 298 K to 573 K using Pt as the anode. Samples with different GaN cap thickness were fabricated to obtain variable temperature sensitivities with linearity above 0.99. A Schottky diode model with an applied bias (VD) dependent equivalent Schottky barrier height (ΦB) is proposed to explain the much higher temperature sensitivity than the conventional AlGaN/GaN SBD thermal sensor. The TCAD simulation clearly confirms the VD dependent ΦB and reveals its effect on amplifying the thermal sensitivity, and the fitting curves calculated by the equivalent equation fits well with the simulation data. This work demonstrates an area and cost-saving solution for the high performance AlGaN/GaN-based temperature sensor applications.

30 September 2024 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
KWKangyao Wen
Kangyao Wen
JHJiaqi He
Jiaqi He
YJYang Jiang
Yang Jiang
FDFangzhou Du
Fangzhou Du
CDChenkai Deng
Chenkai Deng
HYHongyu Yu
Hongyu Yu
This paper reports a non-recessed normally off AlGaN/GaN high-electron-mobility transistor (HEMT) with a charge trapping gate dielectric stack. The charge trapping gate dielectric stack featuring a low density of fixed positive charges consists of an O3-based Al2O3 tunneling layer and an O3-based HfO2 blocking layer, both deposited via atomic layer deposition. For HEMT with a 15 nm AlGaN barrier layer, a threshold voltage of 2.57 V and an on-resistance of 8.50 Ω × mm are achieved. For positive bias temperature instability (PBTI) testing, the electric field provided by the 15 nm AlGaN layer serves as a barrier to channel carriers, significantly enhancing the PBTI test stability. The optimized gate dielectric stack enables the fabrication of the non-recessed normally off metal–insulator–semiconductor-HEMT with enhanced threshold voltage (Vth) stability.

15 December 2025 in Applied Physics Letters
Verified
Journal Article
Closed access
KWKangyao Wen
Kangyao Wen
CDChenkai Deng
Chenkai Deng
YSYuhan Sun
Yuhan Sun
Qing WangQing Wang
Qing Wang
YJYu-Long Jiang
Yu-Long Jiang
HYHongyu Yu
Hongyu Yu
The significant optimization of electric field distribution for AlGaN/GaN metal-insulator-semiconductor high electron mobility transistor (MIS-HEMT) with a thick i-GaN cap layer is reported. The thick i-GaN cap layer is introduced to generate two-dimensional hole gas (2DHG), thereby reducing the electron concentration in the two-dimensional electron gas (2DEG) layer under off-state, in contrast to the high electron concentration in the 2DEG layer under off-state for the MIS-HEMT with a p-type or insulating passivation layer. Due to the low electron concentration in the 2DEG layer and the introduction of the thick i-GaN cap layer, a wide depletion region forms in this cap layer just close to the drain electrode under off-state, resulting in a low electric field intensity both in the whole access region and in the region close to the gate. Thus, the adverse effect induced by the high electric field strength under off-state, such as the large dynamic on-resistance (Ron), is significantly mitigated.

12 January 2026 in IEEE Sensors Journal
Verified
Journal Article
Closed access
YSYuhan Sun
Yuhan Sun
KWKangyao Wen
Kangyao Wen
WLWenmao Li
Wenmao Li
CDChenkai Deng
Chenkai Deng
JHJiaqi He
Jiaqi He
HYHong-Yu Yu
Hong-Yu Yu
An AlGaN/gallium nitride (GaN) Heterostructurebased Schottky barrier diode (SBD) temperature sensor with partially recessed AlGaN barrier layer near the Pt anode and 40-nm SiO2 dielectric under the field plate is proposed for high sensitivity and linearity thermal sensing. The partially thinned AlGaN barrier layer and the 40-nm dielectric with a high work function Pt anode metal collectively result in a lower 2-D electron gas (2DEG) density with a higher Schottky barrier and a wider depletion region, leading to a lower tunneling current with a higher thermal sensitivity and linearity below the turn on voltage. It is experimentally revealed that the SBD with a 3-nm residual AlGaN layer demonstrated the highest sensitivity of 3.75 mV/K with a linearity of 0.997 at 8 $\times$ 10-6 A. The systemic TCAD analysis was conducted to reveal the effects of the anode metal work function and the AlGaN barrier thickness toward the thermal sensing performance of the SBD. This work explores the optimum conditions to reduce the total tunneling current for the AlGaN/GaN-based thermal sensors and shows a great potential for high-performance thermal sensing applications in AlGaN/GaN Heterostructure-based power ICs without the introduction of p-GaN.