Attaining high matching property of the current sources is very important for the design of high-speed high-accuracy current-steering DACs. This paper presents a novel calibration technique-complete-folding, which achieves the high matching accuracy by selectively regrouping current sources into a fully binary-weighted array based on the current comparisons after chip fabrication. The implementation only requires an analog current comparator and some digital circuitry. The minimum requirement of analog circuits makes the complete-folding calibration suitable for the DAC design in the low-voltage process. Statistical results with a behavioral model of a 14-bit segmented DAC in MATLAB show that complete-folding calibration can reduce the total gate area of current sources by a factor of almost 1200 compared to that using intrinsic-accuracy method. Additional results also show that the new calibration technique has the superior performance in compensating random mismatch errors compared with state-of-the-art.
The computer room of the information center is a centralized place for university data. Once a power failure occurs, it will have a great impact on the entire school. In this paper, an intelligent management scheme is designed for the situation of power loss and call in the computer room. Firstly, the IP address and data type correspondence of each server in the university are calculated to provide conditions for the intelligent opening of the server. Then, according to the importance of the server, it is divided into three categories. When the computer room is powered off, the power supply is provided to different types of servers according to the remaining power of the UPS power supply. When the computer room comes in, the main server controls the automatic startup of the other three types of servers, The theory has proved that the scheme has a certain feasibility and can effectively avoid the loss of important data in the first time when the power is cut off.