13 December 2021 in Applied Physics Letters
In this Letter, a high-pressure annealing (HPA) process is proposed as a way to reduce the thermal budget of Hf0.5Zr0.5O2 (HZO) thin films with ferroelectric behaviors. The low-thermal-budget process is essential for integrating ferroelectric devices in the back-end-of-line to provide more functionalities and effective memory area. For the HZO film annealed at 300 °C using the HPA process, an orthorhombic phase responsible for ferroelectric behavior was formed with a decrease in film thickness, resulting in a remanent polarization (Pr) of ∼13 μC/cm2 (i.e., 2Pr of ∼26 μC/cm2). Meanwhile, when only the annealing time was increased at 300 °C without applying pressure, the HZO film did not crystallize and exhibited linear dielectric properties. Consequently, the HZO films (<10 nm) can be crystallized by applying pressure (15 atm) even at low temperatures of 300 °C, thereby obtaining ferroelectric properties.
7 September 2023 in ACS Applied Electronic Materials
28 November 2022 in Applied Physics Letters
HHHeber Hernandez-Arriaga
+9
In this Letter, the robust ferroelectric properties of low-temperature (350 °C) Hf0.5Zr0.5O2 (HZO) films are investigated. We demonstrate that the lower crystallization temperature of HZO films originates from a densified film deposition with an anhydrous H2O2 oxidant in the atomic layer deposition process. As a consequence of this densification, H2O2-based HZO films showed completely crystallinity with fewer defects at a lower annealing temperature of 350 °C. This reduction in the crystallization temperature additionally suppresses the oxidation of TiN electrodes, thereby improving device reliability. The low-temperature crystallization process produces an H2O2-based HZO capacitor with a high remanent polarization (Pr), reduced leakage current, high breakdown voltage, and better endurance. Furthermore, while an O3-based HZO capacitor requires wake-up cycling to achieve stable Pr, the H2O2-based HZO capacitor demonstrates a significantly reduced wake-up nature. Anhydrous H2O2 oxidant enables the fabrication of a more reliable ferroelectric HZO device using a low process thermal budget (350 °C).
14 March 2025 in ACS Applied Materials & Interfaces
1 February 2013 in Journal of Institute of Control, Robotics and Systems
Development of 3-Dimensional Sensor Nodes using Electro-magnetic Waves for Underwater Localization underwater localization;RF;RSSI;antenna;electro-magnetic waves; In this paper, we discuss a 3-dimensional localization sensor node using EM waves (Electromagnetic waves) with RSSI (Received Signal Strength Indicator). Generally EM waves cannot be used in underwater environment, because the signal is highly attenuated by the water medium according to the distance. Although the signal quickly reduces in underwater, the reducing tendency is very clear and uniform. Hence EM waves have possibility as underwater distance sensors. The authors have verified the possibility by theory and several experiments, and developed calibration methods in case of linear and planer environment. For 3-dimensional localization in underwater, it must be known antenna's radiation pattern property in electric plane(called E-plane). In this paper, we proceed experiments to verify attenuation tendency with z axis movement, PLF (Polarization Loss Factor) and ILF (Inclination Loss Factor) with its theoretical approach.
1 March 2025 in Applied Physics Letters
This work comprehensively investigates the thermal budget required to simultaneously achieve low-temperature process conditions and high endurance in atomic layer deposited ferroelectric Hf0.5Zr0.5O2 (HZO) thin films. Because a certain level of thermal budget is required to achieve ferroelectricity in 10 nm HZO thin films, the crystallization temperature can be lowered below 400 °C by simply increasing the annealing time. In addition, the analysis of the crystallization behavior of HZO thin films based on the Johnson–Mehl–Avrami–Kolmogorov model revealed that longer annealing times are required to lower the annealing temperature for HZO crystallization due to the limitation of the crystallization rate. Consequently, low-temperature (<400 °C) ferroelectric HZO thin films with large remanent polarization along with improved leakage behavior and endurance were realized. These results not only facilitate the back-end-of-line integration of HZO thin films but also demonstrate the feasibility of in situ HZO crystallization by thermal budget for subsequent interconnect formation, simplifying the overall process and saving costs by eliminating a dedicated annealing process.