Dragan Maksimovic

Dragan Maksimovic

Auto-generated profile, based on publicly available information

Dragan Maksimovic

University of Colorado

Research Focus & Metrics

Academic Career Length

31Years (1996-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 January 2007 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
HPHao Peng
Hao Peng
APAleksandar Prodic
Aleksandar Prodic
EAEduard Alarcón
Eduard Alarcón
DMDragan Maksimovic
Dragan Maksimovic
In digitally controlled dc-dc converters with a single voltage feedback loop, the two quantizers, namely the analog-to-digital (A/D) converter and the digital pulse-width modulator (DPWM), can cause undesirable limit-cycle oscillations. In this paper, static and dynamic models that include the quantization effects are derived and used to explain the origins of limit-cycle oscillations. In the static model, existence of dc solution, which is a necessary no-limit-cycle condition, is examined using a graphical method. Based on the generalized describing function method, the amplitude and offset-dependent gain model of a quantizer is applied to derive the dynamic system model. From the static and dynamic models, no-limit-cycle conditions associated with A/D, DPWM and compensator design criteria are derived. The conclusions are illustrated by simulation and experimental examples

23 March 2018 in Energies
Verified
Journal Article
Open access
PDF file
COCarlos Olalla
Carlos Olalla
MHMd Nazmul Hasan
Md Nazmul Hasan
CDChris Deline
Chris Deline
DMDragan Maksimović
Dragan Maksimović
In the presence of partial shading and other mismatch factors, bypass diodes may not offer complete elimination of excessive power dissipation due to cell reverse biasing, commonly referred to as hot-spotting in photovoltaic (PV) systems. As a result, PV systems may experience higher failure rates and accelerated ageing. In this paper, a cell-level simulation model is used to assess occurrence of hot-spotting events in a representative residential rooftop system scenario featuring a moderate shading environment. The approach is further used to examine how well distributed power electronics converters mitigate the effects of partial shading and other sources of mismatch by preventing activation of bypass diodes and thereby reducing the chances of heavy power dissipation and hot-spotting in mismatched cells. The simulation results confirm that the occurrence of heavy power dissipation is reduced in all distributed power electronics architectures, and that submodule-level converters offer nearly 100% mitigation of hot-spotting. In addition, the paper further elaborates on the possibility of hot-spot-induced permanent damage, predicting a lifetime energy loss above 15%. This energy loss is fully recoverable with submodule-level power converters that mitigate hot-spotting and prevent the damage.

30 September 2024 in IEEE Open Journal of Power Electronics
Verified
Journal Article
Open access
MCMinjie Chen
Minjie Chen
HLHaoran Li
Haoran Li
SWShukai Wang
Shukai Wang
TGThomas Guillod
Thomas Guillod
DSDiego Serrano
Diego Serrano
CSCharles R. Sullivan
Charles R. Sullivan
This paper summarizes the main results and contributions of the MagNet Challenge 2023, an open-source research initiative for data-driven modeling of power magnetic materials. The MagNet Challenge has (1) advanced the stateof-the-art in power magnetics modeling; (2) set up examples for fostering an open-source and transparent research community; (3) developed useful guidelines and practical rules for conducting data-driven research in power electronics; and (4) provided a fair performance benchmark leading to insights on the most promising future research directions. The competition yielded a collection of publicly disclosed software algorithms and tools designed to capture the distinct loss characteristics of power magnetic materials, which are mostly open-sourced. We have attempted to bridge power electronics domain knowledge with state-of-the-art advancements in artificial intelligence, machine learning, pattern recognition, and signal processing. The MagNet Challenge has greatly improved the accuracy and reduced the size of data-driven power magnetic material models. The models and tools created for various materials were meticulously documented and shared within the broader power electronics community.

19 January 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
MKMohamed Kamel
Mohamed Kamel
VSVivek Sankaranarayanan
Vivek Sankaranarayanan
RZRegan Zane
Regan Zane
DMDragan Maksimovic
Dragan Maksimovic
This article presents a new state-of-charge (SOC) balancing method with parallel and series output connected battery power modules (BPMs) in an active battery management system (BMS.) To increase both the battery pack and system-level modularity, the BMS controls the average SOC of the entire battery pack by regulating the input currents of all BPMs to a common reference. A balancing loop introduces input current offsets to regulate all cells SOCs. The BMS functions are distributed between a central controller for battery pack SOC regulation, and a module controller that regulates the input current of the individual BPMs. Experimental results are presented on a 1.5 kWh 1C-rate prototype with five series output connected battery bricks. Each battery brick consists of three parallel output connected BPMs, which employ three battery cells and three 100 W dc/dc converters.

1 January 2007
Verified
Conference Paper
Closed access
JMJeffrey Morroni
Jeffrey Morroni
ADArseny Dolgov
Arseny Dolgov
MSMariko Shirazi
Mariko Shirazi
RZRegan Zane
Regan Zane
DMDragan Maksimovic
Dragan Maksimovic
Spacecraft power systems and other mission- critical applications require robust power delivery systems. This paper focuses on two aspects of power converter health monitoring: detecting and analyzing loss-related and frequency response-related changes. Two hardware-efficient algorithms are discussed that can be implemented without any additional sensing points other than those required for operation of the converter and with minimal additional digital hardware. It is shown that available converter operating information can be processed to detect a significant (e.g. 2x) change in the power MOSFET RON- In addition, a system identification-based approach with an additional digital pre-fllter is used to extract an accurate and useful frequency response of the converter despite large quantization noise caused by a low-resolution A/D converter. It is shown that this information can be used to accurately monitor the stability margins of the converter. The techniques are verified experimentally on a 90 W 50 V-15 V forward converter with FPGA control.

15 June 2020 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
SMSatyaki Mukherjee
Satyaki Mukherjee
YGYucheng Gao
Yucheng Gao
DMDragan Maksimovic
Dragan Maksimovic
In high-frequency inductors, ac winding losses are affected by skin and proximity effects, including uneven current distribution due to fringing magnetic fields around air gaps. It is well known that fringing effects can be mitigated using distributed air gaps. This article is focused on an orthogonal air-gap approach, which is a distributed air-gap technique where gaps are placed in core segments parallel with the windings and in core segments perpendicular to the windings. The orthogonal air-gap approach is developed using a one-dimensional analytical framework and validated by two-dimensional and three-dimensional finite-element simulations. Analytical guidelines are presented to optimize the air-gap distribution to achieve minimum ac resistance. As a case study, a planar inductor is designed for an 8-kW SiC-based buck converter operating at 250 kHz. It is shown how the orthogonal air gaps result in approximately 50% reduction in ac resistance and substantially reduced inductor losses compared to the design using standard air gaps. Experimental validation includes measurements of losses on the converter prototype as well as quality factor measurements in a resonant-circuit test setup.