Robert Evans

Robert Evans

Auto-generated profile, based on publicly available information

Robert Evans

Swinburne University of Technology

Research Focus & Metrics

Academic Career Length

28Years (1999-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2018 in International Journal of Geomechanics
Verified
Journal Article
Closed access
AMAmirhassan Mehdizadeh
Amirhassan Mehdizadeh
MDMahdi M. Disfani
Mahdi M. Disfani
RERobert Evans
Robert Evans
AAArul Arulrajah
Arul Arulrajah
This paper investigates the posterosion geomechanical behavior of internally unstable granular material due to removal of fines caused by erosive forces of water flow. Posterosion undrained behavior of a gap-graded internally unstable soil was investigated for a range of erosion durations and inflow velocities using a triaxial-erosion apparatus. Test results indicated that the undrained behavior of the original specimen changed from a strain hardening behavior to a flow-type behavior with limited deformation after internal erosion. The initial peak strength improved and the flow potential decreased during the initial stage of erosion. This observed increase in initial peak strength is believed to be the result of a better interlocking between the coarse particles posterosion. In contrast, the slip-down movement of the particles due to an increase in the posterosion void ratio postponed the dilation tendency. Test results also suggested that even erosion of a small percentage of fine particles improved the mechanical frictional behavior of the soil. However, there was a threshold value for the loss of fine particles at which this positive effect deteriorated. This might have been due to formation of local metastable structures and/or overcoming contractive behavior after loss of the semiactive fines and a considerable increase in the global void ratio. Shear strength results, rate of erosion, and local vertical strains together suggest that the intergranular void ratio is a powerful index in evaluating the posterosion mechanical behavior of internally unstable soils.

1 November 2020 in International Journal of Geomechanics
Verified
Journal Article
Closed access
PDF file
AAAsmaa Al-Taie
Asmaa Al-Taie
MDMahdi Disfani
Mahdi Disfani
RERobert Evans
Robert Evans
AAArul Arulrajah
Arul Arulrajah
In practice, it is quite common for soils to be mixed and compacted at moisture contents lower than the optimum moisture content (OMC) or lime content less than the optimum lime content (OLC). This study investigates the effect of not achieving the target of OMC or OLC on the volumetric behavior (swelling and shrinkage) and swelling pressure under swell–shrink cycles. The selected expansive clay was a residual soil derived from weathered Quaternary age basaltic rocks in Western Victoria, Australia. A series of cycles of swell–shrink tests were conducted at different initial lime contents, moisture contents, and stress levels. Vertical deformation and swell–shrink cycles' relationship were obtained and analyzed. The results showed that all specimens tested reached the equilibrium condition after the third swell–shrink cycle. The outcome of investigating the effect of not achieving the target of OLC showed that the maximum swelling occurred on the second cycle changing the degree of expansion from being moderate to very high expansive clay. This result recommended a review of current pavement design procedures to consider the cyclic swell–shrink potential to simulate the field condition for the longer term. However, for investigating the effect of not achieving the target of OMC, the results showed that the maximum swelling occurred at the first cycle, and this suggests that the effect of swell–shrink cycles could be neglected for the long term. This study also showed that at constant moisture content, the swelling pressure decreased as compaction stress decreased; however, at the constant compaction stress, the swelling pressure decreased as moisture content decreased.

23 December 2016 in Road Materials and Pavement Design
Verified
Journal Article
Closed access
AAAsmaa Al-Taie
Asmaa Al-Taie
MDMahdi Disfani
Mahdi Disfani
RERobert Evans
Robert Evans
AAArul Arulrajah
Arul Arulrajah
Suksun horpibulsukSuksun horpibulsuk
Suksun horpibulsuk
Lime stabilisation is a commonly used method for improving the properties of expansive clay subgrades around the world. This paper investigates the effect of curing on the behaviour of lime-stabilised basaltic expansive subgrade. The effect of the presence of low levels of organic material in the surface clay on change in pH of the mixture is also investigated. This leads to a better understanding of the impact of curing duration on the process of lime stabilisation when dealing with these clays. In this study, Braybrook and Whittlesea (a western and a northern suburb of Melbourne, Australia) expansive clays were stabilised using different percentages of hydrated lime. Physical properties of untreated samples and those treated with 2%, 3%, 4%, 6%, and 8% lime were evaluated. A suite of tests was conducted to investigate the behaviour of the stabilised basaltic expansive clay over the curing period and to find the optimum lime content (OLC). These tests included pH concentration at various curing periods (at 1.5 h and at 7, 28, and 57 days), Atterberg limit, linear shrinkage (LS) strain (without curing), swelling potential, and unconfined compressive strength (UCS) (under curing periods of 7 and 28 days). Furthermore, X-ray diffraction (XRD) and scanning electron microscopy (SEM) were conducted on Braybrook soil to investigate the mechanism of soil–lime reaction. The suitability of Eades and Grim [1966. A quick test to determine lime requirements for lime stabilisation. Highway Research Record, 139, 61–72] method in determining OLC is also discussed. Test results of these soils indicated that the longer the curing time, the larger the drop in pH concentration. While the swelling potential results suggest an OLC of 4% (for Braybrook) and 6% (for Whittlesea), UCS tests, plasticity indices, and LS suggest an OLC of 6% for Braybrook soil, while it is about 8% for Whittlesea soil according to UCS tests. However, according to the Eades and Grim (1966) procedure, OLC is about 2.64% and 4% for Braybrook and Whittlesea soils, respectively. This paper suggests a modification of Eades and Grim (1966) method to measure the OLC for basaltic expansive clays to take into account the dropping of pH concentration during curing. The mechanism of lime stabilisation and the analysis of the above tests were the major factors to establish this modification. This modification depends on measuring pH concentration at different lime contents and curing periods. The results contribute to a better understanding of the impact of curing and low levels of organic matters on the stabilisation of expansive clays, which can ultimately lead to a simplified procedure in the determination of OLC.

27 April 2021 in International Journal of Geosynthetics and Ground Engineering
Verified
Journal Article
Closed access
PDF file
BPBhargav Kumar K P
Bhargav Kumar K P
Umashankar BalunainiUmashankar Balunaini
Umashankar Balunaini
AAArul Arulrajah
Arul Arulrajah
RERobert Evans
Robert Evans

1 February 2019 in International Journal of Geomechanics
Verified
Journal Article
Closed access
AAAsmaa Al-Taie
Asmaa Al-Taie
MDMahdi Disfani
Mahdi Disfani
RERobert Evans
Robert Evans
AAArul Arulrajah
Arul Arulrajah
Suksun horpibulsukSuksun horpibulsuk
Suksun horpibulsuk
This paper investigates the influence of lime stabilization of an expansive clay based on volumetric behavior and the soil–water characteristic curve (SWCC). The selected soil was a residual clay located in Victoria, Australia. Specimens treated with an optimum lime content (OLC) that was found to reduce swell potential were selected to investigate the SWCCs. Static compaction tests were conducted to establish the virgin compression surface. Hyprop (Meter Group, Pullman, Washington), filter paper, and the chilled mirror hygrometer were used to measure the SWCC at and below the surface at different net stress levels. To interpret the volumetric behavior of untreated and treated soil using the SWCC, swelling and collapse values were measured at various initial moisture contents and stress levels. The test results found that although the treated specimens were stabilized with lime at OLC, significant collapse and swelling potential were obtained when the lime-treated specimens were prepared at high suction value and wetted under low net stresses.

1 September 2019 in International Journal of Geomechanics
Verified
Journal Article
Closed access
AAAsmaa Al-Taie
Asmaa Al-Taie
MDMahdi Disfani
Mahdi Disfani
RERobert Evans
Robert Evans
AAArul Arulrajah
Arul Arulrajah
The swell-collapse mechanism of residual basaltic clay in both untreated and stabilized with lime conditions was investigated. For treated specimens, the optimum lime content (OLC) was found based on swell potential reduction. Swelling and collapse potential were investigated using the virgin compaction surface, which is the backbone of the Monash-Peradeniya-Kodikara (MPK) framework. The suitability of the MPK was examined by applying different state paths. The swelling and collapse potentials were tested under a wide range of moisture contents and stress levels, with attention given to the effect of stress history and operational stress. Test results indicated that for the untreated and lime-treated clay (at OLC), the behavior of soil during loading, unloading, and wetting closely followed the MPK framework. However, the MPK did not extend to specimens with very low moisture content wetted under low stresses, and, consequently, a new improved model was suggested. Furthermore, a new method for predicting the swelling and collapse potential was proposed using the virgin compaction surface.