25 April 2024 in IEEE Transactions on Power Electronics
This paper proposes a high-efficiency underwater hybrid wireless power transfer (UHWPT) system with low plate voltage stresses to ensure a safe and stable power supply for underwater electrical equipment. The power transfer channel is constituted by an integrated magnetic-electric coupler, formed by nesting coils into C-shaped plates and integrating them into the LC -compensated topology. The system's working principle is analyzed in detail, providing the relationship among the circuit parameters, efficiency, and the same-side inter-plate (SIP) voltage. The impact of the geometric dimensions and insulation on electrical parameters is explored to provide a reference basis for designing the integrated magnetic-electric coupler. A system design method based on the double optimization parameters is hereby proposed. Then, an experimental prototype is set up to verify the feasibility of the design method. Experimental results show that the system achieves the load-independent constant current (CC) output with a maximum efficiency of 87.8%. Compared to the SS-compensated underwater inductive power transfer (UIPT) and capacitive power transfer (UCPT) systems at the same input power, the average suppression of the coil currents and the SIP voltage stresses of the proposed system is improved by 39.1% and 31.3%, respectively.
25 September 2024 in IEEE Transactions on Power Electronics
Within the UAV sector, wireless power transfer applications face challenges due to inaccuracies in landing positioning and docking control, leading to misaligned docking and variable offset ranges. The existing magnetic coupling mechanisms offer limited power supply areas, insufficient to meet the demands of random loads across a wide range of positions. This article focuses on the magnetic coupling mechanism of UAV wireless power transfer systems and proposes a nested UAV wireless power transfer system for a broad coupling region to expand the power supply area and ensure stable power distribution. Employing finite element numerical analysis, the spatial magnetic field generated by the nested emission module is examined, revealing the distribution characteristics of magnetic induction intensity above the module. A “cross-shaped” compensation coil is designed to address coupling blind spots within the power supply area. A coupling performance evaluation method based on optimal magnetic coupling regions is introduced to determine the optimal parameters for the nested magnetic coupling mechanism, along with a general expansion process for multistage embedded coils. Furthermore, by analyzing the cross-coupling state between receiving coils, the spatial arrangement of the receiving end coils is delineated, and their structural parameters are established. An experimental platform for the nested UAV wireless power transfer system is constructed, demonstrating that within the proposed optimal coupling region, power fluctuations are less than 25%, and the magnetic coupling mechanism provides a wide, stable, and reliable power reception area for random loads.
10 September 2025 in IEEE Journal of Emerging and Selected Topics in Power Electronics
In the electric vehicle dynamic wireless power transfer (DWPT) system, power fluctuation occurs when an electric vehicle (EV) transitions from one charging track to another. This article proposes a novel dual-equivalent structure receiving coil. The external structure of this magnetic coupling coil is analogous to a unipolar coil structure, and the internal structure is analogous to a bipolar coil structure, which realizes the interoperability with unipolar and bipolar coils. Unipolar and bipolar coils are arranged alternately, with adjacent pairs connected in series to form a transmitting unit, creating a segmented transmitter and eliminating cross-coupling between adjacent coils. The dual-equivalent structure receiving coil acts to simultaneously couple with the unipolar and bipolar coils during the moving process, maintaining the stability of the total mutual inductance within the system. Furthermore, the LCC-S compensation network is employed to ensure a constant output voltage for the system. A 360W laboratory prototype is built to validate the proposed DWPT system. The experimental results show that the output voltage fluctuates within ±3%, and output power fluctuates within ±6%.
3 December 2025 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Wireless power transfer (WPT) is emerging as an efficient contactless power replenishment method for unmanned transport vehicles in intelligent automation, with applications in automated production lines, logistics parks, and port operations. These settings demand high levels of safety and efficiency. For example, AGV charging stations in electromagnetically dense environments must achieve minimal magnetic leakage to avoid interfering with nearby sensors and control systems, while maintaining high transmission efficiency to support rapid charging cycles. Conventional single-layer ferrite shielding often struggles to reconcile the conflicting demands of stringent magnetic leakage suppression and high transmission efficiency. This paper proposes a novel multi-layer passive composite shielding structure based on a functional-grading strategy, where each material is assigned a specific role to optimize performance. This approach achieves omnidirectional leakage suppression while preserving transmission efficiency, delivering an unprecedented balance between electromagnetic compatibility and operational reliability. Theoretical models based on Maxwell’s equations and equivalent circuit theory were established to investigate how shielding parameters affect system performance. Subsequently, structural optimization was guided by finite element simulations. Experimental results demonstrate that the proposed structure reduces backside and lateral leakage magnetic flux densities by 58.78% and 31.85%, respectively, while maintaining relatively high transmission efficiency in a 0.3 kW/85 kHz system. Compared to existing passive shielding methods, the comprehensive performance index shows an improvement exceeding 50%, with minimal impact on coil self-inductance and mutual inductance. This work provides a cost-effective and efficient electromagnetic compatibility solution for WPT systems, particularly suitable for industrial applications demanding stringent safety and efficiency standards.
9 April 2026 in IEEE Transactions on Power Electronics
Dynamic Wireless Power Transfer technology provides a promising solution to overcome the range limitations of electric vehicles. However, the industrial deployment of this technology remains constrained by limited interoperability and significant power fluctuations during positional misalignments. To address these issues, this article proposes a novel Dual-Channel Composite Receiver. The proposed receiver integrates mutually decoupled rectangular and solenoidal coils to achieve compatibility with both unipolar and bipolar transmitters, and employs a dual-channel complementary magnetic-field enhancement mechanism to improve tolerance against lateral misalignment. Based on a dual-parameter optimization model, the proposed scheme enhances system interoperability and power stability under displacements on the X-Y plane while maintaining the existing transmitter structure. A 1 kW/85 kHz experimental prototype is built to validate the proposed design. Experimental results demonstrate that when the Tx are configured as rectangular and DD coils, the output power fluctuation rates along the driving direction are 3.70% and 2.73%, respectively. Within ±40% of the coil width and one switching period on the X-Y plane, the average system efficiencies reach 90.44% and 86.78%. Furthermore, the system achieves zero-voltage-switching input and load-independent constant-voltage output, verifying the effectiveness of the proposed approach.
1 January 2026 in IEEE Journal of Emerging and Selected Topics in Power Electronics