To solve the nanoparticles (NPs) agglomeration phenomena of nanometer calcium carbonate (nano-CaCO3) modified asphalt binder, in this paper, solvent-free CaCO3 nanofluids (NFs) were prepared based on surface-functionalized CaCO3 NPs to study the effect on asphalt. Microscopic structures, compositions, and thermal stability were characterized by Fourier transform infrared spectrometer (FTIR), X-ray diffractometer (XRD), transmission electron microscope (TEM), and thermogravimetric analyzer (TGA), respectively. Results showed that perfect CaCO3 NFs were successfully prepared, and were good enough for asphalt mixing due to their excellent thermal stability. Scanning electron microscopy (SEM), conventional tests, dynamic shear rheometry (DSR), and bending beam rheometry (BBR) were conducted to investigate the modifying effect. The SEM results indicated that CaCO3 NFs had better compatibility with asphalt binder than original CaCO3 NPs. Conventional and DSR test results demonstrated that CaCO3 NFs had slight negative effects on high-temperature performance while improving the low-temperature performance of the asphalt binder. The BBR test results confirmed that the modifier addition effectively enhanced asphalt binders’ low-temperature crack resistance performance.
Crater depth is a vital issue in dynamic compaction (DC) because it is a controlling parameter in DC and a characterization index of soil properties. A continuous mathematical model capturing the time-domain process of tamper displacement is presented in this paper. The model is simple and the parameters involved are easy to obtain. It was found that the accumulated crater depth increases but its increment in the crater depth decreases with multiple impacts. Three groups of large-scale DC tests with 10,000 kN∙m were conducted to evaluate the performance of the proposed model. The results showed that the proposed model captures the typical trends in the tamper displacement of single and multiple impacts. In addition, a concept of the crater depth ratio is proposed based on the proposed model, and the concept is used to evaluate the efficiency of DC and to predict the optimum tamping number of DCs.
Driven by the huge thermal energy in cement concrete pavements, thermoelectric (TE) cement has attracted considerable attention. However, the current TE cement shows poor performance, which greatly limits its application. Herein, a series of Bi0.5Sb1.5Te3/carbon nanotubes (CNTs) co-reinforced cement composites have been prepared, and their TE properties were systematically investigated. It was shown that the addition of Bi0.5Sb1.5Te3 particles can effectively improve the TE properties of CNTs-reinforced cement composites by building a better conductive network, increasing energy filtering and interfaces scattering. The Bi0.5Sb1.5Te3/CNTs cement composites with 0.6 vol.% of Bi0.5Sb1.5Te3 exhibits the highest ZT value of 1.2 × 10−2, increased by 842 times compared to that of the CNTs-reinforced cement composites without Bi0.5Sb1.5Te3. The power output of this sample with the size of 2.5 × 3.5 × 12 mm3 reaches 0.002 μW at a temperature difference of 19.1 K. These findings shed new light on the development of high-performance TE cement, which can guide continued advances in their potential application of harvesting thermal energy from pavements.
14 February 2025 in Construction and Building Materials