Adsorption of carbamate pesticide Methomyl by Co-Beta Zeolite particles prepared by wet ion-exchange method from aqueous solutions was studied. The effect of zeolite and pesticide concentrations, pH value, and sintering temperature on pesticide removal from an aqueous solution was studied. The change of methomyl concentration during the adsorption was followed using the UV-Visible spectrophotometer. Scanning Electron Microscopy-Energy Dispersive X-ray Spectroscopy (SEM-EDS) revealed the modified zeolite morphology and elemental structure. The change of the adsorbent surface before and after dye removal was observed using the Fourier Transformation-infrared spectroscopy (FT-IR). The adsorption kinetics follows the pseudo-second-order kinetics model, and at optimal condition adsorption rate is k1 = 0.0166 g mg-1 min-1. The Langmuir, Freundlich, Temkin and Dubinin-Radushkovich adsorption isotherm models were used to describe the adsorption process. Thermodynamic parameters were also determined using experimental data. The thermodynamic study indicates that during pesticide adsorption is, chemisorption and physisorption are present at the same.
In this study, porous ceramics, based on available and cost-effective raw materials natural zeolite and kaolin clay, were synthesized and examined as an adsorbent for removing ammonium (NH4+) ions from aqueous solutions. The synthesis was carried out using the foaming method with the addition of sodium dodecyl sulfate as the foaming agent, polyvinyl alcohol as an organic binder, and hydrogen peroxide as the blowing agent. The obtained green and sintered samples were characterized by thermogravimetric analysis, scanning electron microscopy, X-Ray diffraction, and Fourier transform infrared spectroscopy. After sintering, the porosity was 79.49%. The NH4+ adsorption kinetics and isotherms fit the pseudo-second-order and Langmuir models, confirming chemisorption. The maximum adsorption capacity obtained using the Langmuir model was approximately 7.66 mg g-1. The thermodynamic parameters showed that adsorption is a spontaneous and exothermic process. Based on the obtained results, it was demonstrated that the synthesis of porous ceramics based on natural zeolite and kaolin clay is a practical way to increase the adsorption performance of natural zeolite for NH4+ removal from water solutions.
26 May 2025 in Metallurgical & Materials Engineering Congress of South-East Europe
In the last decade, access to clean water has become a challenge, because of the rapid population growth and enormous agricultural and industrial activities. There are numerous processes for removing dissolved heavy metals, including ion exchange, coagulation, precipitation and adsorption. Adsorption could be the most effective for this purpose because of the low cost, easy operation, and short duration time. Nowadays, porous ceramic materials are promising adsorbents for different heavy metal ions. Eco-friendly porous ceramics based on natural zeolite and bentonite clay were synthesized and adsorption capacity toward Zn2+ ions was investigated. The synthesis was performed using the foaming method without an organic binder. Hydrogen peroxide was used as the blowing agent, while sodium dodecyl sulfate was used as the foaming agent. The obtained green and sintered samples of porous ceramics were characterized in detail by different methods (TG/DTG, SEM, XRD, FTIR, XRF). Results showed that the foamed samples could be synthesized at room temperature and fully crystallized after being sintered at 800 °C. Total porosity of porous ceramic sample reached maximum value of 74.7%. The second-order model and Langmuir model best described the adsorption kinetic and isotherm data. The maximum adsorption capacity obtained using the Langmuir model was approximately 5.01 mg Zn2+/g. The thermodynamic parameters showed that adsorption is a spontaneous and endothermic process favored at higher temperatures. Overall, this study highlights the potential of porous ceramics based on natural zeolite and bentonite for the removal of heavy metals and provides insight into the mechanisms of the adsorption process.
Methomyl is a widely used carbamate pesticide, which has been extensively used over the past 60 years, primarily as an insecticide, but also as an herbicide and fungicide. Methomyl pro-duction involves a series of complex reactions. During its synthesis, wastewater from pesticide manufacturing plants can contaminate aqueous media. This study provides the results of investi-gation of effectiveness of methomyl removal from aqueous solutions by adsorption using the ther-mally regenerated microspheres of activated carbon (RAC). The microstructure of the adsorbent surface was examined by scanning electron microscopy (SEM). The change in the relative concen-tration of the pesticide in the aqueous solution was monitored using UV-Vis spectrophotometry. Methomyl adsorption kinetics and isotherms of regenerated activated carbon microspheres fit the pseudo-first-order and Freundlich models. The pseudo-first-order rate constant is 0.0105 min-1 at a temperature of 25 °C. By determinig the thermodynamic parameters of adsorption, it can be concluded that the process is spontaneous and exothermic.