11 December 2024 in IEEE Electron Device Letters
In this letter, a unique region dependence of positive and negative bias stress (PBS/NBS) stabilities is investigated in InGaZnO (IGZO) thin-film transistors (TFTs). Based on the floating channel effect, the electric field of the channel region is solely modified with remained source and drain (S/D) region potential by applying S/D biases and grounded gate compared to traditional PBS and NBS tests, so that the role of different regions in IGZO is decoupled. A new degradation model is built to elucidate the NBS issues. It provides more direct evidence to indicate that the migration of defects in S/D region, rather than channel region, dominates NBS responses in IGZO TFTs. The effect of proposed region dependence model on PBS stability is discussed as well. This work unveils a stability mechanism in sub-um IGZO TFTs, providing new insights into achieving reliable devices for 3D DRAM.
10 October 2024 in IEEE Electron Device Letters
During the investigation of amorphous oxide semiconductor thin film transistors (TFTs), researchers found that TFTs containing a heterostructure-channel demonstrate exceptional mobility. This study focuses on the physical insights into the interfacial channel formation and modulating the device performance. The InGaZnO / InSnO heterostructure-channel TFTs were utilized. The band structure of their interface channel was elucidated by Ultraviolet Photoelectron Spectroscopy and Reflection Electron Energy Loss Spectroscopy. Through the examination of the band structures of heterostructure-channel TFTs, we have discovered that the thickness of the InSnO layer can modify the interface band-edge via the quantum confinement effect. By that, the threshold voltage of the heterostructure-channel TFT was altered.
3 March 2025 in IEEE Transactions on Electron Devices
In recent years, there has been significant interest in amorphous oxide semiconductor (AOS) thin-film transistors (TFTs). Multiple investigations have documented the advancement of AOS TFTs, which are utilized in 2T0C dynamic random access memory (DRAM). This work investigates the hysteresis and reliability performance of InGaZnO (IGZO) TFTs and InSnO (ITO) TFTs under different annealing conditions. ITO TFTs have superior electrical performance, with an extremely little hysteresis of practically zero volts and threshold voltage shifts of less than 0.07 V with negative and positive bias stress (PBS) lasting 1000 s. The analysis of hysteresis relies on considering the traps existing at the interface between the gate dielectric and the channel, the interface between the passivation layer and the channel, and electric dipoles. Meanwhile, the good reliability of ITO TFTs is attributed to the simple composition of the ITO channel and the change in valence state of Sn during annealing. The text discusses the illumination of the influence caused by the shifting of threshold voltage in 2T0C DRAM read transistors. ITO read transistors exhibit a retention duration that is more than seven times longer. This finding indicates that the ITO channel is a potential avenue for research within the realm of 2T0C DRAM.
24 March 2025 in IEEE Electron Device Letters
In this work, 2-tier Monolithic 3-Dimentional (M3D) integrated FinFETs and circuits are fabricated based on a low-temperature (≤ 500 ℃) silicide dopant segregation Schottky Source/Drian (SDSS S-D) technology. By forming NiPt silicide followed by B/P implantation and optimizing annealing on top-tier fins, a sharpened Schottky Barrier of the silicide and a high dopant segregation concentration of the impurities are obtained in the improved silicide S-D with maximum process temperature below 500 °C. As a result, Low-T 2-tier M3D FinFETs are obtained with ION= 646.4 μA/μm for PMOS and ION = 450.6 μA/μm for NMOS at LG= 500 nm and a record ION= 1.84 mA/μm is achieved for PMOS at LG = 25 nm under normalized footprint. Furthermore, M3D inverter, ring oscillators, as well as 6T SRAM with this technique are demonstrated, which is promising to provide an effective and low-cost method to achieve low-temperature high-performance silicon circuits in M3D applications.
14 June 2024 in IEEE Journal of the Electron Devices Society
In this article, a partially isolated dual work function (PIDWF) gate In-Ga-Zn-O (IGZO) thin-film transistor (TFT) is proposed to reduce the off-state current (Ioff) obviously, which also provides a feasible integration method for stacking IGZO TFT on Si-based devices. It is found that compared with the general back gate IGZO TFT structure, the Ioff of the proposed IGZO TFT reduces from 2.57×10-14A/μm to 7.57×10-16 A/μm, achieving two orders of magnitude improvement. This breakthrough has the potential to increase the retention time of DRAM applications by nearly 100 times. Moreover, the pronounced novel structure has mitigated parasitic capacitance, thereby leading to a notable 47.7% reduction in write latency within dynamic-random-access-memory (DRAM) circuits. The relevant operation mechanism is carefully demonstrated and verified by the simulation of the electric field and potential barrier results by technical computer-aided design (TCAD). Furthermore, the impacts of the dual gate work function level, the length, and the type of isolation dielectric between dual work function gates are systematically investigated. The results show that the off-state leakage is further reduced by increasing the difference of the work function levels between in dual gates, the dielectric length (LD) and using the isolation layer with a lower dielectric constant. The PIDWF gate IGZO TFT exhibits scalability and is capable of achieving an 84.6% reduction in leakage current even with ultra-short channel lengths, which offers a promising application for future 3D DRAM applications with little extra cost.
26 August 2025 in IEEE Journal of the Electron Devices Society
Monolithic 3-Dimensional (M3D) integration has emerged as a promising approach to extend Moorefs Law. However, overcoming the thermal limitations associated with fabricating top-tier devices remains a significant challenge. In this study, laser-induced silicide dopant segregation (LSDS) source/drain (S/D) technology is explored to optimize the performance of low thermal budget (Low-TB,≤500∘C for 2 hours) Schottky Barrier MOSFET fabricated as top-tier devices for M3D integration. A nanosecond-pulsed green laser is employed to induce dopant segregation in Schottky S/D regions, resulting in a sharpened interface with a high Schottky barrier and elevated impurity concentration. This process enables the fabrication of high-performance CMOS devices, achieving ION> 100 μA/μm at LG = 500 nm with limited variation. Experimental results show that the S/D series resistance is reduced by 28.7% and 11.9% for N and P MOSFETs at 1.0 J/cm2 compared to the conventional rapid thermal annealing (RTA) process. Furthermore, inverters, ring oscillators, and logic gates are successfully demonstrated, showing the multi-functionality of this approach and its potential as an alternative fabrication scheme for M3D circuit applications.