6 August 2024 in Nano Research
Organic–inorganic hybrid perovskites are quite promising candidates in the field of electromagnetic wave (EMW) absorption due to their unique physicochemical properties. However, it is still a considerable challenge to satisfy the light weight, broad bandwidth, and strong absorption properties simultaneously. Herein, the solution of methylammonium lead iodide (MAPbI3) perovskites was infiltrated into the pores of reduced graphene oxide (rGO) aerogels. After drying, a series of MAPbI3/rGO composite aerogel (MGA) materials were synthesized by anchoring the MAPbI3 perovskite nanoparticles to rGO sheets with the assistance of rGO templates. Through the adjustment of component ratios, excellent EMW absorption properties are obtained with the synergistic effects of polarization loss, conduction loss, and multiple reflection and scattering of MAPbI3 and rGO. The porous structure of the aerogel and the suitable group distribution ratio allowed the MGA-4 samples to obtain excellent impedance matching and ultra-low density of ∼ 7.69 mg·cm−3. At a low filling ratio of 15 wt.%, the MGA-4 sample simultaneously achieves highly efficient and broadband EMW absorption performance at a thin thickness. The MGA-4 sample obtained a minimum reflection loss value of −64.35 dB and the effective absorption bandwidth (EAB) value of 5.4 GHz at a thickness of 2.08 mm and a maximum EAB (EABmax) value of 6.2 GHz under 2.22 mm. The MGA-5 sample obtained a maximum EAB value of 6.4 GHz with the thinckness of 2.16 mm. Furthermore, the simulation results of the radar cross-section (RCS) verified the component-optimized composites are capable of achieving excellent EMW attenuation. This paper provides a new approach and valuable reference for the development of hybrid perovskite-based microwave absorption materials with lightweight, ultra-broadband, and strong absorption properties.
20 February 2024 in IEEE Journal of Quantum Electronics
A high-speed and high-power modified uni-traveling-carrier photodiode (MUTC-PD) is optimized and fabricated. The optimization method takes carrier transport as the core and considers the hole transport time limited bandwidth of the MUTC-PD for the first time. Taking into account the impact of the electron transport time and RC time constant on device performance, the device is simulated and fabricated. In structure epitaxy, it is proposed to use graded doping to fit Gaussian doping to reduce the epitaxial growth error. The measured bandwidth of the MUTC-PD reaches 34 GHz and the RF output power reaches 17.1 dBm with the mesa diameter of $20~\mu \text{m}$ . In addition, the influence of modulation depth on high-speed and high-power performance is studied.
29 December 2022 in IEEE Journal of Quantum Electronics
A cascade array structure and depleted layer thickness design method of uni-traveling-carrier photodetector (UTC-PD) for terahertz applications is proposed. The cascade array structure can increase the 3dB bandwidth from 203 GHz to 255 GHz compared to the high-speed single UTC-PD with a diameter of 3 μm by effectively reducing the overall device capacitance. The 3dB bandwidth can be further improved to 267 GHz by thickness optimization. The combination of cascade array structure and depleted layer thickness optimization can significantly improve the saturation output power of the device at 100, 200 and 300 GHz, which enables the design of cascade UTC-PD array to be applied in terahertz (THz) band.
7 July 2023 in Optical and Quantum Electronics