13 October 2021 in JACS Au
The electrochemical reduction of CO2 is widely studied as a sustainable alternative for the production of fuels and chemicals. The electrolyte’s bulk pH and composition play an important role in the reaction activity and selectivity and can affect the extent of the buildup of pH gradients between the electrode surface and the bulk of the electrolyte. Quantifying the local pH and how it is affected by the solution species is desirable to gain a better understanding of the CO2 reduction reaction. Local pH measurements can be realized using Scanning Electrochemical Microscopy (SECM); however, finding a pH probe that is stable and selective under CO2 reduction reaction conditions is challenging. Here, we have used our recently developed voltammetric pH sensor to perform pH measurements in the diffusion layer during CO2 reduction using SECM, with high time resolution. Using a 4-hydroxylaminothiophenol (4-HATP)/4-nitrosothiophenol (4-NSTP) functionalized gold ultramicroelectrode, we compare the local pH developed above a gold substrate in an argon atmosphere, when only hydrogen evolution is taking place, to the pH developed in a CO2 atmosphere. The pH is monitored at a fixed distance from the surface, and the sample potential is varied in time. In argon, we observe a gradual increase of pH, while a plateau region is present in CO2 atmosphere due to the formation of HCO3– buffering the reaction interface. By analyzing the diffusion layer dynamics once the sample reaction is turned “off”, we gain insightful information on the time scale of the homogeneous reactions happening in solution and on the time required for the diffusion layer to fully recover to the initial bulk concentration of species. In order to account for the effect of the presence of the SECM tip on the measured pH, we performed finite element method simulations of the fluid and reaction dynamics. The results show the significant localized diffusion hindrance caused by the tip, so that in its absence, the pH values are more acidic than when the tip is present. Nonetheless, through the simulation, we can account for this effect and estimate the real local pH values across the diffusion layer.
28 September 2015 in Physical Chemistry Chemical Physics
Microbial biofilms grown utilizing electrodes as metabolic electron acceptors or donors are a new class of biomaterials with distinct electronic properties. Here we report that electron transport through living electrode-grown Geobacter sulfurreducens biofilms is a thermally activated process with incoherent redox conductivity. The temperature dependency of this process is consistent with electron-transfer reactions involving hemes of c-type cytochromes known to play important roles in G. sulfurreducens extracellular electron transport. While incoherent redox conductivity is ubiquitous in biological systems at molecular-length scales, it is unprecedented over distances it appears to occur through living G. sulfurreducens biofilms, which can exceed 100 microns in thickness.
17 July 2009 in Applied Catalysis B: Environment and Energy
VNVijayadurga Nallathambi
8 July 2019 in ACS Catalysis
7 March 2017 in ACS Catalysis
13 January 2014 in Physical Chemistry Chemical Physics
Iron based nitrogen doped carbon (FeNC) catalysts are synthesized by high-pressure pyrolysis of carbon and melamine with varying amounts of iron acetate in a closed, constant-volume reactor. The optimum nominal amount of Fe (1.2 wt%) in FeNC catalysts is established through oxygen reduction reaction (ORR) polarization. Since the quantity of iron used in FeNCs is very small, the amount of Fe retained in FeNC catalysts after leaching is determined by UV-VIS spectroscopy. As nitrogen is considered to be a component of active sites, the amount of bulk and surface nitrogen retention in FeNC catalysts are measured using elemental analysis and X-ray photoelectron spectroscopy, respectively. It is found that increasing nominal Fe content in FeNC catalysts leads to a decreased level of nitrogen retention. Thermogravimetric analysis demonstrates that increasing nominal Fe content leads to increased weight loss during pyrolysis, particularly at high temperatures. Catalysts are also prepared in the absence of iron source, and with iron removed by washing with hot aqua regia post-pyrolysis. FeNC catalysts prepared with no Fe show high retained nitrogen content but poor ORR activity, and aqua regia washed catalysts demonstrate similar activity to Fe-free catalysts, indicating that Fe is an active site component.