Fumi Nakamura

Fumi Nakamura

Auto-generated profile, based on publicly available information

Fumi Nakamura

National Institute of Advanced Industrial Science and Technology (AIST)

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 July 2021 in Journal of Lightwave Technology
Verified
Journal Article
Open access
RKRafael Kraemer
Rafael Kraemer
FNFumi Nakamura
Fumi Nakamura
MHMenno van Den Hout
Menno van Den Hout
SHSjoerd Van der Heide
Sjoerd Van der Heide
COChigo Okonkwo
Chigo Okonkwo
Nicola CalabrettaNicola Calabretta
Nicola Calabretta
As fiber-optic systems turn toward multi-band transmission (MBT), exploiting the complete low loss window of optical fibers, novel optical components, able to operate in bands other than the conventional C-band, become necessary. In light of this, we report on a multi-band photonic integrated $\mathbf {1\times 2}$ wavelength selective switch (WSS) operating in the O, S, C and L-bands. The photonic integrated WSS presented in this work uses a folded arrayed-waveguide grating (AWG) as the filtering element, while the wideband operation of the thermo-optic switches allows the routing of the individual channels from those bands to any of the device output ports. The operation of the WSS is experimentally validated for different bands and modulation formats. Results show error-free operation with limited penalty with intensity-modulation direct-detection (IM/DD) non-return-to-zero on-off keying (NRZ-OOK) up to 35 Gb/s in O, S, C and L-bands and up to 169.83 Gb/s with coherent 64-quadrature amplitude modulation (QAM) data transmission in the S, C and L-bands.

11 May 2018 in Optics Express
Verified
Journal Article
Closed access
PDF file
FNFumi Nakamura
Fumi Nakamura
KMKyosuke Muramatsu
Kyosuke Muramatsu
KSKeijiro Suzuki
Keijiro Suzuki
KTKen Tanizawa
Ken Tanizawa
MOMinoru Ohtsuka
Minoru Ohtsuka
HTHiroyuki Tsuda
Hiroyuki Tsuda
A wavelength selective switch (WSS) can route optical signals into any of output ports by wavelength, and is a key component of the reconfigurable optical add/drop multiplexer. We propose a wavefront control type WSS using silicon photonics technology. This consists of several arrayed waveguide gratings sharing a large slab waveguide, wavefront control waveguides and distributed Bragg reflectors. The structure, design method, operating principle, and scalability of the WSS are described and discussed. We designed and fabricated a 1 × 2 wavefront control type WSS using silicon waveguides. This has 16 channels with a channel spacing of 200 GHz. The chip size is 5 mm × 10 mm. The switching operation was achieved by shifting the phase of the light propagating in each wavefront control waveguide, and by controlling the propagation direction in the shared large slab waveguide. Our WSS has no crossing waveguide, so the loss and the variation in loss between channels were small compared to conventional waveguide type WSSs. The heater power required for switching was 183 mW per channel, and the average extinction ratios routed to Output#1 and Output#2 were 9.8 dB and 10.2 dB, respectively.

31 December 2020 in Journal of Lightwave Technology
Verified
Journal Article
Open access
FNFumi Nakamura
Fumi Nakamura
HAHideaki Asakura
Hideaki Asakura
KSKeijiro Suzuki
Keijiro Suzuki
KTKen Tanizawa
Ken Tanizawa
MOMinoru Ohtsuka
Minoru Ohtsuka
HTHiroyuki Tsuda
Hiroyuki Tsuda
The design of a novel 1 x M fold-back type wavelength selective switch (WSS), which has fewer waveguide crossings than a conventional integrated WSS, is reported. The WSS is composed of interleavers, 1 M optical switches, and arrayed waveguide gratings (AWGs). Switches are combined with AWGs by fold-back waveguides, and each AWG works as both a demultiplexer and multiplexer thus avoiding center wavelength mismatch caused by fabrication errors. Waveguide crossings cause excess crosstalk and loss in lightwave circuits. By using a fold-back architecture the number of crossings can be reduced to less than half that of a conventional design. We discuss the operating principle, the design method, and the scalability of the fold-back type WSS. Furthermore, the switching operation of a 200 GHz spacing 20 channel 1 2 silicon WSS in a fold-back configuration on a 5 mm 10 mm SOI chip is demonstrated. This has 15 waveguide crossings in a path, of which six are additional crossings with monitor waveguides. The average insertion loss and average extinction ratio are 29.6 dB and 10.9 dB, respectively.

18 February 2025 in Journal of Lightwave Technology
Verified
Journal Article
Open access
SSSatoshi Suda
Satoshi Suda
ANAkihiro Noriki
Akihiro Noriki
HKHaruhiko Kuwatsuka
Haruhiko Kuwatsuka
FNFumi Nakamura
Fumi Nakamura
YAYuki Atsumi
Yuki Atsumi
TATakeru Amano
Takeru Amano
This paper explores the fundamental optical characteristics and high-power handling capabilities of single-mode polymer waveguides fabricated on glass-epoxy substrates for co-packaged optics (CPO) utilizing external laser sources (ELS). The waveguides exhibit low polarization-dependent loss (PDL) of less than 0.5 dB and low differential group delay (DGD) of less than 0.2 ps in the O-band, along with excellent uniformity across eight fabricated samples. Key parameters such as insertion loss and mode field dimensions demonstrated extremely small variations, ensuring consistent performance across eight waveguides. The polarization extinction ratio (PER), a critical metric for evaluating waveguide performance in ELS-based systems, was measured at all wavelengths within the CWDM4 standard, specifically at 1271, 1291, 1311, and 1331 nm. A high PER of over 20 dB was achieved in all waveguides and at all wavelengths, indicating stable polarization control. Additionally, high-power reliability testing was conducted under continuous-wave optical input of +20 dBm, demonstrating excellent input-output linearity and no measurable power degradation after 6 hours. Thermal analysis showed a minimal temperature rise of approximately 4.4 °C under these conditions, consistent with theoretical predictions, highlighting the robustness of the waveguides under high-power conditions. These results confirm the polymer waveguides are suitable for demanding ELS-based applications, providing reliable and efficient solutions for next-generation high-density and high-capacity optical communication systems, such as data centers and high-performance computing environments.

5 June 2023 in Journal of Lightwave Technology
Verified
Journal Article
Open access
FNFumi Nakamura
Fumi Nakamura
SSSatoshi Suda
Satoshi Suda
TKTakayuki Kurosu
Takayuki Kurosu
YIYasuhiro Ibusuki
Yasuhiro Ibusuki
ANAkihiro Noriki
Akihiro Noriki
TATakeru Amano
Takeru Amano
Because traffic toward and inside datacenters is increasing, the power consumption of electrical wiring in ethernet switches for datacenter should be addressed. Co-packaged optics (CPO) is a promising solution, where optical components are integrated into the same package substrate as electrical elements. We have proposed one of the CPO modules, where micro-mirror- based optical redistribution is adopted for low-loss and broadband optical coupling. CPO is required to operate at high temperatures; however, this redistribution uses materials with different coefficients of thermal expansion; thus, there is concern about its operation. In this study, the thermo-optical characteristics in the C-band were analyzed by the finite element method for thermal deformation and physical optical propagation analysis. The coupling efficiency of more than 85% was obtained at 1550 nm in the specified temperature range of 15–85 °C, and the difference in the average coupling loss between 20 °C and 85 °C was 0.49 dB in the calculation. The temperature-dependent transmittance was experimentally demonstrated using fabricated optical redistribution, and the average loss difference in C-band was 0.80 dB at 25 °C, 55 °C, and 85 °C.

16 November 2022 in Journal of Vacuum Science & Technology B
Verified
Journal Article
Open access
PDF file
FNFumi Nakamura
Fumi Nakamura
KSKenta Suzuki
Kenta Suzuki
ANAkihiro Noriki
Akihiro Noriki
TATakeru Amano
Takeru Amano
Co-packaged optics (CPO) is a key technology for addressing power bottlenecks in datacenters by integrating optical and electrical components and replacing electrical wiring with optical links. In the CPO module where silicon chips are embedded on the substrate and polymer waveguides are integrated as optical connections, a pair of 3D micromirrors can achieve low-loss and wideband optical coupling from silicon photonics to polymer waveguides. The shape of the polymer micromirror patterned by grayscale photo lithography depends on process conditions and requires high fabrication accuracy. In this study, photonanoimprint technology is adopted for stable micromirror fabrication. The imprint process for a polymer micromirror was considered from a hyperelastic analysis using the finite element method. The master mold was prepared using grayscale lithography with photosensitive polyimide as a template of a polydimethylsiloxane (PDMS) replica mold. The micromirror fabrication was demonstrated on a 4-in. silicon wafer. By imprinting into a guide groove structure with a PDMS replica mold, over 30 μm-height micromirrors were stably obtained multiple times by a step-and-repeat imprint. The linear part of the patterned mirror by the imprint process was more than 23.5 μm for four times imprinting, and the fabricated mirror shape was improved compared with grayscale lithography. The total height misalignment is 5 μm for 12 mirrors in four imprints, and 70% coupling efficiency in calculation was achieved.