Pb‐Sn mixed perovskites are becoming increasingly popular as narrow‐bandgap (1.2–1.3 eV) light absorbers in single‐junction perovskite solar cells (PSCs) and as bottom cells for all‐perovskite tandem solar cells, for high‐efficiency, low‐cost, lightweight, roll‐to‐roll printable photovoltaic (PV) applications. From the first report of planar Pb:Sn mixed PSCs in 2014, the power conversion efficiencies (PCE) have increased from 10% to 21% by the end of 2020 with an exponential growth in research conducted in this field. Despite much effort, the performance and stability of Pb‐Sn mixed PSCs are still limited, which constrains their long‐term use in all‐perovskite tandem devices. This review highlights the avenues explored in improving different aspects of Pb‐Sn mixed PSCs and provides a comprehensive discussion of the interdependent factors affecting the device performance. This includes compositional engineering of the perovskite crystal, absorber layer fabrication and crystallization methods, bandgap tuning, Sn4+ reduction, and surface passivation of the absorber layer, as well as the selection of interlayers and electrodes of the final PSC.
15 November 2023 in Renewable and Sustainable Energy Reviews
The introduction of strain into semiconductors offers a well-known route to modify their band structure. Here, we show a single-step procedure for generating such strains smoothly and deterministically, over a very wide range, using a simple, easily available, highly scalable, ion implantation technique to control the degree of amorphization in and around single-crystal membranes. The amorphization controls the density of the material and thus the tension in the neighboring crystalline regions. We have demonstrated up to 3.1% biaxial tensile strain and 8.5% uniaxial strain in silicon, based on micro-Raman spectroscopy. This method achieves strain levels never previously reached in mesoscopic defect-free, crystalline silicon structures. The flexible, gently controllable, single-step process points toward very high mobility complementary metal-oxide-semiconductor devices and easy fabrication of direct-bandgap germanium for silicon-compatible optoelectronics.
Ruddlesden–Popper phase (RPP) perovskites of the form A1n−1A22BnX3n+1 show great promise in stable photovoltaic (PV) devices or as light emitting diodes (LEDs), by allowing for the mixing of 2D materials and tuning of the band gap over a large energy range.