Lidija Kosychova

Lidija Kosychova

Auto-generated profile, based on publicly available information

Lidija Kosychova

Faculty of Marine Technology and Natural Sciences, Klaipeda University, Klaipeda, Lithuania

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 February 2022 in Waste Management & Research: The Journal for a Sustainable Circular Economy
Verified
Journal Article
Open access
Jochen UebeJochen Uebe
Jochen Uebe
ZKZilvinas Kryzevicius
Zilvinas Kryzevicius
RMRasa Majauskiene
Rasa Majauskiene
MDMarijus Dulevicius
Marijus Dulevicius
LKLidija Kosychova
Lidija Kosychova
AŽAudronė Žukauskaitė
Audronė Žukauskaitė
In this study, polypropylene (PP) was recycled in a non-stirred batch reactor by slow pyrolysis at low temperature. Virgin PP and waste PP as well as mixed material of equal amounts of virgin PP plus virgin PP pyrolysis oil (ratio 1:1 w/w) were used as raw material. The highest yields of liquid product were obtained at 350°C and 400°C (82.0 and 82.3 w/w%, respectively). The density, viscosity and calorific value of the gasoline and diesel fractions of the obtained pyrolysis oils comply with EN228 and EN590 standards, respectively. The flash point corresponded to the standard only for some of the oils, but the cold filter clogging point, the pour point and especially the oxidation stability were far above the stated reference values of the standards. The pyrolysis oils as products of thermal decomposition were determined by the methods of 1H and 13C and two-dimensional-heteronuclear single quantum coherence nuclear magnetic resonance (2D-HSQC NMR) spectra. Spectral analysis showed that only very little aromatic compounds were present in the oils, but they contained many unsaturated compounds, which is presumably consistent with the measured oxidation stability and limits their use in the production of alternative fuels. The research octane number (RON) calculated from the NMR analyses corresponds to the lower limit of gasoline.

Verified
Journal Article
Open access
PDF file
Jochen UebeJochen Uebe
Jochen Uebe
ZKZilvinas Kryzevicius
Zilvinas Kryzevicius
Aravindaraj KuhanAravindaraj Kuhan
Aravindaraj Kuhan
ATArturas Torkelis
Arturas Torkelis
LKLidija Kosychova
Lidija Kosychova
AŽAudronė Žukauskaitė
Audronė Žukauskaitė
The slow pyrolysis of macroalgae at moderate temperatures in the reactor used resulted in an oil with a slightly better calorific value than that of the literature, but the other properties were not convincing. Therefore, co-pyrolysis with HDPE offers a way out in this study. However, this did not improve the property profile as a fuel, as the co-pyrolysate was incombustible due to its high water content. Only a mixture of the pyrolysis oil from algae and of the HDPE wax from the initial pyrolysis of HDPE resulted in a diesel-like product: the density was from 807 kg m−3, the viscosity 3.39 mm2 s−1, the calorific value was 46 MJ kg−1, and the oxidation stability was 68 min. The isoparaffin index indicates only a low branching of the paraffins, and therefore a low research octane number of 80. The blend did not need any further stabilizing additives.